AVESTA 25-22-2 LN

Alloy Digest ◽  
1989 ◽  
Vol 38 (6) ◽  
Keyword(s):  
Corrosion Resistance ◽  
High Temperature ◽  
Yield Strength ◽  
Physical Properties ◽  
Tensile Properties ◽  
Heat Treating ◽  
Corrosion Resistant ◽  
Temperature Performance

Abstract AVESTA 25-22-2LN is a stronger, more corrosion resistant austenitic stainless than AVESTA 17-15-2.5L (revised as AvestaPolarit 724L, Alloy Digest SS-501, October 2001). It is designed for use in equipment subject to the most corrosive conditions encountered in the production of urea. At 570 F (300 C) it has about a 35% higher yield strength than 17-15-2.5L. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on high temperature performance and corrosion resistance as well as heat treating, machining, and joining. Filing Code: SS-506. Producer or source: Avesta Stainless Inc..

COOPER ALLOY 14S

Alloy Digest ◽  
1964 ◽  
Vol 13 (7) ◽  
Keyword(s):  
Heat Treatment ◽  
Fracture Toughness ◽  
Corrosion Resistance ◽  
High Temperature ◽  
Physical Properties ◽  
Tensile Properties ◽  
Heat Treating ◽  
Corrosion Resistant ◽  
Temperature Performance ◽  
Corrosion Resistant Alloy

Abstract Cooper Alloy 14S is an abrasion, heat and corrosion resistant alloy steel containing 12% chromium. It can be hardened by heat treatment. It is recommended for pumps and valves in the cast form. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness and creep. It also includes information on high temperature performance and corrosion resistance as well as casting, heat treating, machining, and joining. Filing Code: SS-158. Producer or source: Cooper Alloy Corporation.

ARMCO 410 Cb

Alloy Digest ◽  
1963 ◽  
Vol 12 (7) ◽  
Keyword(s):  
Fracture Toughness ◽  
Corrosion Resistance ◽  
High Temperature ◽  
Physical Properties ◽  
Tensile Properties ◽  
Heat Treating ◽  
Corrosion Resistant Steel ◽  
Resistant Steel ◽  
Corrosion Resistant ◽  
Temperature Performance

Abstract Armco 410 Cb is a modified Type 410 corrosion resistant steel by the addition of columbium. It is extremely tough and impact resistant. It is a hardenable grade but less sensitive to tempering variables than Type 410. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness, creep, and fatigue. It also includes information on low and high temperature performance, and corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: SS-145. Producer or source: Armco Inc., Eastern Steel Division. See also Alloy Digest SS-261, October 1971.

RA 309

Alloy Digest ◽  
1963 ◽  
Vol 12 (4) ◽  
Keyword(s):  
Corrosion Resistance ◽  
High Temperature ◽  
Physical Properties ◽  
Tensile Properties ◽  
High Temperatures ◽  
Heat Treating ◽  
Corrosion Resistant Steel ◽  
Resistant Steel ◽  
Corrosion Resistant ◽  
Temperature Performance

Abstract RA 309 is a chromium-nickel heat and corrosion resistant steel recommended for high temperatures applications. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as creep. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: SS-142. Producer or source: Rolled Alloys Inc..

ELEKTRON MAGNESIUM ALLOY-ZTY

Alloy Digest ◽  
1968 ◽  
Vol 17 (12) ◽  
Keyword(s):  
Corrosion Resistance ◽  
High Temperature ◽  
Magnesium Alloy ◽  
Yield Strength ◽  
Physical Properties ◽  
Tensile Properties ◽  
Heat Treating ◽  
Temperature Performance ◽  
Wrought Magnesium Alloy

Abstract ELEKTRON Magnesium-ZTY is a wrought magnesium alloy that retains almost constant 0.1% yield strength of 22000 psi up to 190 C. It is hot formable, easily machined and fully weldable. It was developed for use at temperatures up to about 250 C (480 F). This datasheet provides information on composition, physical properties, and tensile properties as well as creep and fatigue. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: Mg-66. Producer or source: Magnesium Elektron Ltd.

TUF-STUF 224K

Alloy Digest ◽  
1954 ◽  
Vol 3 (4) ◽  
Keyword(s):  
Fracture Toughness ◽  
Corrosion Resistance ◽  
High Temperature ◽  
Physical Properties ◽  
Tensile Properties ◽  
Heat Treating ◽  
Aluminum Bronze ◽  
Corrosion Resistant ◽  
Temperature Performance

Abstract TUF STUF 224K is a heat treatable type of aluminum bronze containing about 5% nickel. It is tough and corrosion resistant. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness and creep. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: Cu-15. Producer or source: Mueller Brass Company.

LAPELLOY C

Alloy Digest ◽  
1958 ◽  
Vol 7 (11) ◽  
Keyword(s):  
Corrosion Resistance ◽  
High Temperature ◽  
Physical Properties ◽  
Tensile Properties ◽  
Heat Treating ◽  
Corrosion Resistant Steel ◽  
Resistant Steel ◽  
Corrosion Resistant ◽  
High Chromium ◽  
Temperature Performance

Abstract LAPELLOY C is a high-chromium, molybdenum heat and corrosion resistant steel used for highly stressed parts involving service temperatures up to 1200 F. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: SS-81. Producer or source: Carpenter.

RMI 55

Alloy Digest ◽  
1981 ◽  
Vol 30 (1) ◽  
Keyword(s):  
Corrosion Resistance ◽  
High Temperature ◽  
Yield Strength ◽  
Physical Properties ◽  
Surface Treatment ◽  
Tensile Properties ◽  
Heat Treating ◽  
Temperature Performance ◽  
Commercially Pure ◽  
Minimum Yield

Abstract RMI 55 is a grade of commercially pure unalloyed titanium. It has good ductility and formability with a guaranteed minimum yield strength of 55,000 psi. It has good impact properties at room temperatures and excellent resistance to corrosion by marine atmospheres and seawater. Among its uses are equipment requiring resistance to corrosion and aircraft parts. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: Ti-81. Producer or source: RMI Company.

NIMARK II

Alloy Digest ◽  
1965 ◽  
Vol 14 (10) ◽  
Keyword(s):  
Corrosion Resistance ◽  
High Temperature ◽  
Yield Strength ◽  
Physical Properties ◽  
Surface Treatment ◽  
Tensile Properties ◽  
High Strength ◽  
Heat Treating ◽  
Low Carbon ◽  
Temperature Performance

Abstract NiMark II is a vacuum melted low-carbon alloy steel in which yield strength in excess of 250,000 psi can be developed. It is readily weldable and exhibits good ductility at high strength levels and excellent notch ductility. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: SA-184. Producer or source: Carpenter.

INCONEL ALLOY 725HS

Alloy Digest ◽  
2003 ◽  
Vol 52 (3) ◽  
Keyword(s):  
Fracture Toughness ◽  
Corrosion Resistance ◽  
Shear Strength ◽  
High Temperature ◽  
Physical Properties ◽  
Tensile Properties ◽  
Heat Treating ◽  
Corrosion Resistant ◽  
Inconel Alloy ◽  
Temperature Performance

Abstract Inconel Alloy 725HS is a Ni-Cr-Mo-Cb alloy that is age hardenable and is a higher strength version of Inconel alloy 725 (see Alloy Digest Ni-445, January 1994). The alloy is corrosion resistant and is often used in fastener or marine fabrication applications. This datasheet provides information on composition, physical properties, elasticity, tensile properties, and shear strength as well as fracture toughness. It also includes information on high temperature performance and corrosion resistance as well as heat treating and machining. Filing Code: Ni-604. Producer or source: Special Metals Corporation.

K MONEL

Alloy Digest ◽  
1955 ◽  
Vol 4 (3) ◽  
Keyword(s):  
Fracture Toughness ◽  
Corrosion Resistance ◽  
High Temperature ◽  
Physical Properties ◽  
Tensile Properties ◽  
Heat Treating ◽  
Corrosion Resistant ◽  
International Nickel Company ◽  
Temperature Performance ◽  
Nickel Copper

Abstract K MONEL is a corrosion-resistant wrought alloy of nickel, copper and aluminum. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness and creep. It also includes information on low and high temperature performance, and corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: Ni-17. Producer or source: The International Nickel Company Inc..

Sign in / Sign up

Export Citation Format

Share Document