METGLAS MBF-90/MBF-90A

Alloy Digest ◽  
1984 ◽  
Vol 33 (6) ◽  
Keyword(s):  
Corrosion Resistance ◽  
Metallic Glass ◽  
Physical Properties ◽  
Stainless Steels ◽  
Elevated Temperatures ◽  
High Strength ◽  
Heat Treating ◽  
Diffusion Brazing

Abstract METGLAS MBF-90/MBF-90A is a brazing foil in ductile, flexible metallic-glass form (a similar grade, MBF-90, is identical except that is has larger dimensional tolerances. It is suitable for joining stainless steels and superalloys, including those containing aluminum and titanium. It provides high strength at elevated temperatures. This foil flows well into deep joints with narrow clearances. It is excellent for diffusion brazing. This datasheet provides information on composition, physical properties, and microstructure. It also includes information on corrosion resistance as well as forming, heat treating, and joining. Filing Code: Ni-298. Producer or source: Allied Corporation.

METGLAS MBF-80/80A

Alloy Digest ◽  
1983 ◽  
Vol 32 (8) ◽  
Keyword(s):  
Corrosion Resistance ◽  
Metallic Glass ◽  
Elevated Temperatures ◽  
High Strength ◽  
Heat Treating ◽  
Temperature Resistance ◽  
Diffusion Brazing ◽  
Resistance To Oxidation ◽  
Oxidation And Corrosion ◽  
Sluggish Flow

Abstract METGLAS MBF-80A is a brazing foil in ductile, flexible metallic-glass form (a similar grade, MBF-80, is identical except that it has larger dimensional tolerances). It provides high-strength brazements at elevated temperatures and good moderate-temperature resistance to oxidation and corrosion. Its sluggish flow fills wide gaps up to 0.100 mm (0.004 inch). It is an excellent choice for diffusion brazing. This datasheet provides information on composition, physical properties, and microstructure. It also includes information on corrosion resistance as well as forming, heat treating, and joining. Filing Code: Ni-290. Producer or source: Allied Corporation.

UDIMET 520

Alloy Digest ◽  
1962 ◽  
Vol 11 (9) ◽  
Keyword(s):  
Corrosion Resistance ◽  
Physical Properties ◽  
Surface Treatment ◽  
Tensile Properties ◽  
Elevated Temperatures ◽  
Base Alloy ◽  
High Strength ◽  
Heat Treating ◽  
Nickel Base Alloy ◽  
Nickel Base

Abstract UDIMET 520 is a nickel-base alloy recommended for applications where high strength at elevated temperatures is required. It is suitable for service at temperatures up to 1800 F. This datasheet provides information on composition, physical properties, and tensile properties as well as creep. It also includes information on corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: Ni-74. Producer or source: Special Metals Inc..

METGLAS MBF-10/10A

Alloy Digest ◽  
1981 ◽  
Vol 30 (11) ◽  
Keyword(s):  
High Temperature ◽  
Metallic Glass ◽  
Physical Properties ◽  
Tensile Properties ◽  
Stainless Steels ◽  
High Strength ◽  
Heat Treating ◽  
Jet Engine ◽  
Major Application

Abstract METGLAS MBF-10A is a brazing foil in ductile, flexible metallic-glass form (a similar grade, MBF-10, is identical except that it has larger dimensional tolerances). This foil provides an alloy with high strength at both elevated and room temperatures. It can be used to join highly stressed stainless steels and heat-resisting alloy components. Major application is in fabricating high-temperature jet-engine parts. This datasheet provides information on composition, physical properties, microstructure, tensile properties. It also includes information on heat treating and joining. Filing Code: Ni-272. Producer or source: Allied Corporation.

BUDERUS 58-28

Alloy Digest ◽  
1972 ◽  
Vol 21 (1) ◽  
Keyword(s):  
Corrosion Resistance ◽  
High Temperature ◽  
Physical Properties ◽  
Tensile Properties ◽  
Elevated Temperatures ◽  
High Strength ◽  
Heat Treating ◽  
Cobalt Alloy ◽  
Temperature Performance ◽  
Steel Corporation

Abstract BUDERUS 58-28 is a cobalt alloy having high strength and excellent toughness at elevated temperatures. This datasheet provides information on composition, physical properties, and tensile properties. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: Co-64. Producer or source: Buderus Steel Corporation.

PANDEX VAC ARC

Alloy Digest ◽  
1961 ◽  
Vol 10 (3) ◽  
Keyword(s):  
Fracture Toughness ◽  
Corrosion Resistance ◽  
High Temperature ◽  
Physical Properties ◽  
Precipitation Hardening ◽  
Elevated Temperatures ◽  
High Strength ◽  
Heat Treating ◽  
Good Corrosion Resistance ◽  
Temperature Performance

Abstract PANDEX VAC ARC is a precipitation hardening, austenitic, heat resisting alloy designed for service at elevated temperatures where high strength and good corrosion resistance are required. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness and creep. It also includes information on low and high temperature performance, and corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: SS-115. Producer or source: Latrobe Steel.

G BABBIT

Alloy Digest ◽  
1973 ◽  
Vol 22 (7) ◽  
Keyword(s):  
Corrosion Resistance ◽  
Physical Properties ◽  
Tensile Properties ◽  
Elevated Temperatures ◽  
High Strength ◽  
Heat Treating ◽  
Bearing Alloy

Abstract G Babbit is a lead-base bearing alloy high in arsenic (2.5-3%) for high loads and speeds. It was designed to provide relatively high strength and hardness, especially at elevated temperatures. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fatigue. It also includes information on corrosion resistance as well as casting, forming, and heat treating. Filing Code: Pb-11. Producer or source: Federated Metals Corporation, ASARCO Inc..

CARPENTER STAINLESS TYPE 443

Alloy Digest ◽  
1981 ◽  
Vol 30 (9) ◽  
Keyword(s):  
Corrosion Resistance ◽  
High Temperature ◽  
Physical Properties ◽  
Stainless Steels ◽  
Intergranular Corrosion ◽  
Elevated Temperatures ◽  
Heat Treating ◽  
Chromium Steel ◽  
Continuous Operation ◽  
Temperature Performance

Abstract CARPENTER STAINLESS TYPE 443 is a heat-resisting chromium steel which stands up very well under destructive scaling conditions up to 1600 F (871 C). It is not subject to intergranular corrosion as a result of hot working, welding or continuous operation at elevated temperatures. Type 443 is comparable to the 18-8 chromium-nickel stainless steels in resistance to both corrosion and scaling but is not as though as they are nor as hard at elevated temperatures. This datasheet provides information on composition, physical properties, elasticity, and tensile properties as well as creep. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: SS-391. Producer or source: Carpenter.

CARPENTER STAINLESS TYPE 317

Alloy Digest ◽  
1983 ◽  
Vol 32 (4) ◽  
Keyword(s):  
Stainless Steel ◽  
Corrosion Resistance ◽  
High Temperature ◽  
Physical Properties ◽  
Tensile Properties ◽  
Stainless Steels ◽  
Elevated Temperatures ◽  
Heat Treating ◽  
Paper Pulp ◽  
Temperature Performance

Abstract CARPENTER STAINLESS TYPE 317 is a modified version of the conventional 18% chromium-8% nickel stainless steel made by adding molybdenum (3-4%) and more nickel (nominally 13%). Molybdenum is added to improve resistance to corrosion by certain specific corrodents. The extra nickel is added to keep the steel austenitic by offsetting the well-known effect of molybdenum in promoting the formation of ferrite. Type 317 has higher tensile and creep strengths than the 18-8 stainless steels at elevated temperatures. Its many uses include equipment to handle paper pulp and high-temperature applications. This datasheet provides information on composition, physical properties, elasticity, and tensile properties as well as creep. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: SS-423. Producer or source: Carpenter.

METGLAS MBF-17/MBF-17A

Alloy Digest ◽  
1984 ◽  
Vol 33 (9) ◽  
Keyword(s):  
Corrosion Resistance ◽  
Metallic Glass ◽  
Physical Properties ◽  
High Temperatures ◽  
Turbine Blades ◽  
High Strength ◽  
Heat Treating ◽  
Oxidation And Corrosion

Abstract METGLAS MBF-17A is a brazing foil in ductile, flexible metallic-glass form (A similar grade, MBF-17, is identical except that it has larger dimensional tolerances). It provides high strength at both elevated and room temperatures with moderate oxidation and corrosion resistance. An example of application is brazing turbine blades in truck engines where high strength at high temperatures is required. This datasheet provides information on composition, physical properties, and microstructure. It also includes information on forming, heat treating, and joining. Filing Code: Ni-303. Producer or source: Allied Corporation.

MST 5Al-2.5 Sn

Alloy Digest ◽  
1959 ◽  
Vol 8 (8) ◽  
Keyword(s):  
Fracture Toughness ◽  
Corrosion Resistance ◽  
Titanium Alloy ◽  
High Temperature ◽  
Physical Properties ◽  
Surface Treatment ◽  
Elevated Temperatures ◽  
High Strength ◽  
Heat Treating ◽  
Temperature Performance

Abstract MST 5A1-2.5 Sn is a titanium alloy combining good weldability and high strength at elevated temperatures. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness and creep. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: Ti-21. Producer or source: Mallory-Sharon Metals Company.

Sign in / Sign up

Export Citation Format

Share Document