NIMROD 625, 625KS

Alloy Digest ◽  
2002 ◽  
Vol 51 (3) ◽  
Keyword(s):  
Corrosion Resistance ◽  
High Temperature ◽  
Tensile Properties ◽  
Base Metal ◽  
Heat Treating ◽  
Similar Composition ◽  
Temperature Performance

Abstract Nimrod 625 and 625KS are Inconel-type consumables with molybdenum and niobium. They are used to join UNS N06625 and Nicrofer 6020hMo of similar composition and also for other lower alloys to ensure the weld has as good or better corrosion resistance as does the base metal. This datasheet provides information on composition, hardness, and tensile properties. It also includes information on high temperature performance as well as heat treating and joining. Filing Code: Ni-581. Producer or source: Metrode Products Ltd.

UCI-190

Alloy Digest ◽  
1997 ◽  
Vol 46 (7) ◽  
Keyword(s):  
Corrosion Resistance ◽  
High Temperature ◽  
Physical Properties ◽  
Tensile Properties ◽  
Base Metal ◽  
Creep Resistance ◽  
Heat Treating ◽  
General Purpose ◽  
Temperature Performance ◽  
Steam Cracking

Abstract UCI-190 (HP) material is a general-purpose alloy for use in steam-cracking tubes and fittings and reformer furnaces. HP alloy has carburization, oxidation, and creep resistance at temperatures up to 2000 F. The alloy is weldable by GTAW, GMAW, and SMAW using electrodes with composition matching the base metal (25Cr-35Ni) or NiCrCoMo-1 (AWS 5.11 and AWS 5.14). Preheat or post heat normally are not required. UCI-190 has been used for many years providing consistent and predictable results in high-temperature applications. This datasheet provides information on composition, physical properties, and tensile properties as well as creep. It also includes information on high temperature performance and corrosion resistance as well as casting, heat treating, machining, and joining. Filing Code: SS-689. Producer or source: Ultra-Cast Inc.

ALLEGHENY LUDLUM AL276

Alloy Digest ◽  
1996 ◽  
Vol 45 (1) ◽  
Keyword(s):  
Corrosion Resistance ◽  
High Temperature ◽  
Power Plant ◽  
Physical Properties ◽  
Surface Treatment ◽  
Tensile Properties ◽  
Crevice Corrosion ◽  
Heat Treating ◽  
Chemical Plants ◽  
Temperature Performance

Abstract Allegheny Ludlum AL276 is widely used in the most severe environments found in chemical plants and in power plant desulfurization systems. The high molybdenum level with tungsten gives excellent pitting and crevice corrosion resistance. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on low and high temperature performance, and corrosion resistance as well as forming, heat treating, joining, and surface treatment. Filing Code: Ni-497. Producer or source: Allegheny Ludlum Corporation.

PYROTOOL A

Alloy Digest ◽  
1971 ◽  
Vol 20 (4) ◽  
Keyword(s):  
Corrosion Resistance ◽  
High Temperature ◽  
Physical Properties ◽  
Surface Treatment ◽  
Tensile Properties ◽  
High Strength ◽  
Heat Treating ◽  
Good Ductility ◽  
Extrusion Dies ◽  
Temperature Performance

Abstract PYROTOOL A has been designed to display high strength and good ductility at temperatures up to 1200 F. It is used for high-temperature tooling, extrusion dies, liners, dummy blocks, forging dies, mandrels, holders, etc. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: Fe-47. Producer or source: Carpenter.

UNISPAN LR35

Alloy Digest ◽  
1971 ◽  
Vol 20 (1) ◽  
Keyword(s):  
Thermal Expansion ◽  
Corrosion Resistance ◽  
High Temperature ◽  
Physical Properties ◽  
Surface Treatment ◽  
Tensile Properties ◽  
Coefficient Of Thermal Expansion ◽  
Heat Treating ◽  
Temperature Performance ◽  
Operational Level

Abstract UNISPAN LR35 offers the lowest coefficient of thermal expansion of any alloy now available. It is a low residual modification of UNISPAN 36 for fully achieving the demanding operational level of precision equipment. This datasheet provides information on composition, physical properties, hardness, and tensile properties. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, machining, and surface treatment. Filing Code: Fe-46. Producer or source: Cyclops Corporation.

SILNIC BRONZE

Alloy Digest ◽  
1960 ◽  
Vol 9 (7) ◽  
Keyword(s):  
Corrosion Resistance ◽  
High Temperature ◽  
Physical Properties ◽  
Tensile Properties ◽  
High Strength ◽  
Heat Treating ◽  
Silicon Alloy ◽  
Good Corrosion Resistance ◽  
Temperature Performance ◽  
Nickel Silicon

Abstract SILNIC BRONZE is a copper-nickel-silicon alloy having high strength, high conductivity and good corrosion resistance. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: Cu-90. Producer or source: Chase Brass & Copper Company Inc..

ALUMINUM 1100

Alloy Digest ◽  
1974 ◽  
Vol 23 (2) ◽  
Keyword(s):  
Corrosion Resistance ◽  
Shear Strength ◽  
High Temperature ◽  
Physical Properties ◽  
Tensile Properties ◽  
Pure Aluminum ◽  
Heat Treating ◽  
Industrial Applications ◽  
Temperature Performance ◽  
Commercially Pure

Abstract ALUMINUM 1100 is commercially pure aluminum and is characterized by its excellent ability to be drawn, spun, stamped or forged. It has good weldability, excellent resistance to corrosion and many home, architectural and industrial applications. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and shear strength as well as fatigue. It also includes information on low and high temperature performance, and corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: Al-44. Producer or source: Various aluminum companies. Originally published October 1956, revised February 1974.

PYROMET M252

Alloy Digest ◽  
1991 ◽  
Vol 40 (12) ◽  
Keyword(s):  
Corrosion Resistance ◽  
High Temperature ◽  
Physical Properties ◽  
Tensile Properties ◽  
Heat Treating ◽  
Temperature Performance ◽  
Technology Corporation ◽  
Carpenter Technology Corporation

Abstract PYROMET alloy M-252 was designed for use in highly stressed parts operating at temperatures up to 1600 F (871 C). This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as creep. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, and machining. Filing Code: Ni-397. Producer or source: Carpenter Technology Corporation.

ALLVAC 80A

Alloy Digest ◽  
1990 ◽  
Vol 39 (2) ◽  
Keyword(s):  
Corrosion Resistance ◽  
High Temperature ◽  
Physical Properties ◽  
Tensile Properties ◽  
Precipitation Hardening ◽  
Heat Treating ◽  
Temperature Performance

Abstract ALLVAC 80A is an 80% Ni/20% Cr alloy which is strengthened by precipitation hardening through the addition of Ti and A1. It is produced by vacuum induction plus vacuum are remelting. This datasheet provides information on composition, physical properties, elasticity, and tensile properties as well as creep. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: Ni-379. Producer or source: Allvac Inc..

ACCURATE METAL

Alloy Digest ◽  
1969 ◽  
Vol 18 (10) ◽  
Keyword(s):  
Corrosion Resistance ◽  
High Temperature ◽  
Physical Properties ◽  
Surface Treatment ◽  
Tensile Properties ◽  
Nickel Alloy ◽  
High Strength ◽  
Heat Treating ◽  
Temperature Performance ◽  
Copper Nickel Alloy

Abstract ACCURATE METAL is a copper-nickel alloy having high strength, ductility and corrosion resistance. It was especially designed for exacting electronic and electrical applications. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fatigue. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, joining, and surface treatment. Filing Code: Cu-207. Producer or source: Connecticut Metals Corporation.

UDIMET L-605

Alloy Digest ◽  
2004 ◽  
Vol 53 (12) ◽  
Keyword(s):  
Corrosion Resistance ◽  
High Temperature ◽  
Physical Properties ◽  
Tensile Properties ◽  
Gas Turbine ◽  
Oxidation Resistance ◽  
Turbine Blades ◽  
Heat Treating ◽  
Gas Turbine Blades ◽  
Temperature Performance

Abstract Udimet L-605 is a high-temperature aerospace alloy with excellent strength and oxidation resistance. It is used in applications such as gas turbine blades and combustion area parts. This datasheet provides information on composition, physical properties, and tensile properties as well as creep. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, and joining. Filing Code: CO-109. Producer or source: Special Metals Corporation.

Sign in / Sign up

Export Citation Format

Share Document