ARMCO FORMABLE 50 HR

Alloy Digest ◽  
1979 ◽  
Vol 28 (3) ◽  
Keyword(s):  
Corrosion Resistance ◽  
Nonmetallic Inclusions ◽  
High Strength ◽  
Heat Treating ◽  
Low Carbon ◽  
Low Alloy Steel ◽  
Controlled Processing ◽  
Hot Rolled ◽  
Special Composition ◽  
Minimum Yield

Abstract ARMCO FORMABLE 50 HR is a hot-rolled high-strength low-alloy steel that provides excellent ductility, weldability and edge-tear resistance at a minimum yield strength of 50,000 psi (345 MPa). It has unusually good fabricating properties that are the result of closely controlled processing of a fully killed, low-carbon, vacuum-degassed, columbium-alloyed steel. This special composition and processing practice minimize harmful nonmetallic inclusions that hamper formability. Typical applications include automotive, construction and farm-equipment components. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fatigue. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: SA-356. Producer or source: Armco Inc., Eastern Steel Division.

ARMCO FORMABLE 70 HR

Alloy Digest ◽  
1979 ◽  
Vol 28 (5) ◽  
Keyword(s):  
Nonmetallic Inclusions ◽  
High Strength ◽  
Heat Treating ◽  
Rolled Steel ◽  
Low Carbon ◽  
Controlled Processing ◽  
High Strength Level ◽  
Hot Rolled ◽  
Hot Rolled Steel ◽  
Special Composition

Abstract ARMCO FORMABLE 70 HR is a hot-rolled steel with excellent ductility, weldability and edge-tear resistance at a minimum yield strength of 70,000 psi (483 MPa). For this relatively high strength level, it has unusually good fabricating properties that are the result of closely controlled processing of a fully killed, low-carbon, vacuum-degassed, columbium-alloyed steel. This special composition and processing practice minimize harmful nonmetallic inclusions that hamper formability. Typical applications include automotive reinforcements, truck parts and construction components. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fatigue. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: SA-359. Producer or source: Armco Inc., Eastern Steel Division.

REPUBLIC X-80-W

Alloy Digest ◽  
1980 ◽  
Vol 29 (5) ◽  
Keyword(s):  
Corrosion Resistance ◽  
Yield Strength ◽  
Physical Properties ◽  
Surface Treatment ◽  
High Strength ◽  
Heat Treating ◽  
Low Alloy Steel ◽  
Rolled Condition ◽  
Hot Rolled ◽  
Minimum Yield

Abstract REPUBLIC X-80-W is a high-strength, low-alloy steel developed to achieve a minimum yield strength of 80,000 psi in the as-hot-rolled condition. It also exhibits good fatigue performance, good bendability, and good weldability. It is available as bars and can be used in various automotive and machinery applications. This datasheet provides information on composition, physical properties, elasticity, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: SA-372. Producer or source: Republic Steel Corporation.

ULTRA-FORM 80

Alloy Digest ◽  
1973 ◽  
Vol 22 (7) ◽  
Keyword(s):  
High Strength ◽  
Heat Treating ◽  
Low Carbon ◽  
Low Alloy Steel ◽  
Bethlehem Steel Corporation ◽  
Temperature Performance ◽  
Inclusion Shape ◽  
Ferrite Grain Size ◽  
Minimum Yield ◽  
Shape And Size

Abstract Ultra-Form 80 is a low-alloy steel developed for its combination of high strength, good formability, fatigue resistance, toughness and weldability. It has a minimum yield strength of 80,000 psi and is characterized by its low carbon and alloy content, very fine ferrite grain size, and controlled inclusion shape and size. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness and fatigue. It also includes information on low and high temperature performance, and corrosion resistance as well as forming, heat treating, joining, and surface treatment. Filing Code: SA-291. Producer or source: Bethlehem Steel Corporation.

ARMCO VNT

Alloy Digest ◽  
1971 ◽  
Vol 20 (2) ◽  
Keyword(s):  
Fracture Toughness ◽  
Corrosion Resistance ◽  
High Strength ◽  
Heat Treating ◽  
Bend Strength ◽  
Low Alloy Steel ◽  
Fine Grain ◽  
Treated Steel ◽  
International Sales ◽  
Minimum Yield

Abstract ARMCO VNT is a high-strength, low-alloy steel normalized for added toughness, ductility and uniformity. It is a silicon-killed, vanadium-nitrogen treated steel, made to fine-grain practive and provides a 60,000 psi minimum yield strength. This datasheet provides information on composition, physical properties, elasticity, tensile properties, and bend strength as well as fracture toughness. It also includes information on corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: SA-260. Producer or source: Armco International Sales.

INLAND HI-FORM

Alloy Digest ◽  
1978 ◽  
Vol 27 (5) ◽  
Keyword(s):  
Corrosion Resistance ◽  
Yield Strength ◽  
High Strength Steels ◽  
High Strength ◽  
Heat Treating ◽  
Low Carbon ◽  
Bending Properties ◽  
Fine Grain ◽  
Low Sulfur ◽  
Minimum Yield

Abstract INLAND HI-FORM Steels are a low-carbon, low or intermediate-manganese, low-sulfur, aluminum-killed, fine-grain, columbium and/or phosphorus-bearing series of high-strength steels providing greatly enhanced forming and bending properties. These steels are furnished in minimum yield strength levels from 40,000 to 80,000 psi. They are used widely in the transportation and mobile-equipment industries. See also Ispat Inland Cal Hi-Form 80Y100T, Alloy Digest CS-136, May 2003. This datasheet provides information on composition, physical properties, elasticity, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: SA-346. Producer or source: Ispat Inland Inc..

J & L VAN-80

Alloy Digest ◽  
1970 ◽  
Vol 19 (9) ◽  
Keyword(s):  
Fracture Toughness ◽  
Corrosion Resistance ◽  
Physical Properties ◽  
Tensile Properties ◽  
Alloy Steel ◽  
Fatigue Resistance ◽  
High Strength ◽  
Heat Treating ◽  
Low Alloy Steel ◽  
Hot Rolled

Abstract J and L VAN-80 is a hot-rolled, controlled-cooled high-strength, low-alloy steel developed for uses where high strength in combination with excellent toughness, cold formability, weldability and fatigue resistance are required. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness and fatigue. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: SA-256. Producer or source: Jones & Laughlin Steel Corporation.

YOUNGSTOWN YS-T50 to YS-T140 STEELS

Alloy Digest ◽  
1977 ◽  
Vol 26 (4) ◽  
Keyword(s):  
Physical Properties ◽  
High Strength Steels ◽  
High Strength ◽  
Heat Treating ◽  
Steel Alloy ◽  
Bend Strength ◽  
Weight Saving ◽  
Cold Rolled ◽  
Hot Rolled ◽  
Minimum Yield

Abstract YS-T 50 to YS-T 140 Steels comprise a series of high-strength, cold-rolled steels designed to meet performance and weight-saving objectives. They are an extension of Youngstown's series of hot-rolled high-strength steels (see Youngstown YS-T Steel, Alloy Digest SA-261, March 1971). The YS-T 50 to YS-T 140 steels have minimum yield strengths ranging from 50,000 psi to 140,000 psi. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and bend strength. It also includes information on heat treating, machining, and joining. Filing Code: SA-331. Producer or source: Youngstown Sheet and Tube Company.

SUMITOMO SMC276-110

Alloy Digest ◽  
2017 ◽  
Vol 66 (6) ◽  
Keyword(s):  
Corrosion Resistance ◽  
Yield Strength ◽  
Physical Properties ◽  
Tensile Properties ◽  
Nickel Alloy ◽  
High Strength ◽  
Heat Treating ◽  
Sour Service ◽  
Minimum Yield

Abstract Sumitomo SMC276-110 (minimum yield strength of 110 ksi, or 758 MPa) is an austenitic high-strength nickel alloy for use in oil country tubular goods as a material suitable for severe sour service. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on corrosion resistance as well as forming and heat treating. Filing Code: Ni-730. Producer or source: Nippon Steel and Sumitomo Metal Corporation.

BETHSTAR 60

Alloy Digest ◽  
1986 ◽  
Vol 35 (8) ◽  
Keyword(s):  
Fracture Toughness ◽  
Yield Strength ◽  
Steel Plate ◽  
High Stress ◽  
High Strength ◽  
Heat Treating ◽  
Low Carbon ◽  
Bethlehem Steel Corporation ◽  
Low Sulfur ◽  
Minimum Yield

Abstract BethStar 60 steel plate is a high-strength product with a 60,000 psi minimum yield strength. It contains low carbon and low sulfur and has outstanding toughness, weldability and formability. It provides the design engineer with a an economical high-strength low-alloy (HSLA) grade that can be fabricated readily. Applications include weight-sensitive components subject to high stress such as frames for large off-highway haulers. This datasheet provides information on composition, physical properties, microstructure, elasticity, and tensile properties as well as fracture toughness. It also includes information on forming, heat treating, and joining. Filing Code: SA-421. Producer or source: Bethlehem Steel Corporation.

AW-TEN

Alloy Digest ◽  
1966 ◽  
Vol 15 (8) ◽  
Keyword(s):  
Fracture Toughness ◽  
Corrosion Resistance ◽  
Service Life ◽  
Yield Strength ◽  
High Strength ◽  
Heat Treating ◽  
Bend Strength ◽  
Steel Company ◽  
Superior Corrosion Resistance ◽  
Minimum Yield

Abstract AW-TEN is a high-strength structural steel offering 50,000 psi minimum yield strength, good formability and weldability, and superior corrosion resistance. It is intended primarily for weight reduction and longer service life. It is recommended for automobile and truck bodies, buildings, bridges, railway cars, booms, etc. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and compressive and bend strength as well as fracture toughness and fatigue. It also includes information on forming, heat treating, machining, and joining. Filing Code: SA-199. Producer or source: Alan Wood Steel Company.

Sign in / Sign up

Export Citation Format

Share Document