REPUBLIC X-80-W

Alloy Digest ◽  
1980 ◽  
Vol 29 (5) ◽  
Keyword(s):  
Corrosion Resistance ◽  
Yield Strength ◽  
Physical Properties ◽  
Surface Treatment ◽  
High Strength ◽  
Heat Treating ◽  
Low Alloy Steel ◽  
Rolled Condition ◽  
Hot Rolled ◽  
Minimum Yield

Abstract REPUBLIC X-80-W is a high-strength, low-alloy steel developed to achieve a minimum yield strength of 80,000 psi in the as-hot-rolled condition. It also exhibits good fatigue performance, good bendability, and good weldability. It is available as bars and can be used in various automotive and machinery applications. This datasheet provides information on composition, physical properties, elasticity, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: SA-372. Producer or source: Republic Steel Corporation.

MAXI-FORM 50

Alloy Digest ◽  
1972 ◽  
Vol 21 (10) ◽  
Keyword(s):  
Fracture Toughness ◽  
Corrosion Resistance ◽  
Yield Strength ◽  
Physical Properties ◽  
Surface Treatment ◽  
Tensile Properties ◽  
High Strength ◽  
Heat Treating ◽  
Low Alloy Steel ◽  
Edge Cracking

Abstract MAXI-FORM 50 is a high-strength low-alloy steel developed for applications involving severe bending or moderate draw forming with exceptional freedom from rupture and edge cracking. It is supplied in the 50,000 psi yield-strength range, and also has good weldability. This datasheet provides information on composition, physical properties, elasticity, and tensile properties as well as fracture toughness. It also includes information on corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: SA-282. Producer or source: Republic Steel Corporation.

DOGAL LAD

Alloy Digest ◽  
2011 ◽  
Vol 60 (10) ◽  
Keyword(s):  
Yield Strength ◽  
Physical Properties ◽  
Surface Treatment ◽  
Tensile Properties ◽  
High Strength ◽  
Heat Treating ◽  
Minimum Yield

Abstract Dogal 300 LAD, 340 LAD, 380 LAD, 420 LAD, 460 LAD and 500 LAD are high-strength low alloyed steels intended for pressing. The designation in the name is the guaranteed minimum yield strength. Dogal steels can be zinc coated. This datasheet provides information on composition, physical properties, and tensile properties. It also includes information on surface qualities as well as forming, heat treating, joining, and surface treatment. Filing Code: CS-167. Producer or source: SSAB Swedish Steel Inc..

SUMITOMO SMC276-110

Alloy Digest ◽  
2017 ◽  
Vol 66 (6) ◽  
Keyword(s):  
Corrosion Resistance ◽  
Yield Strength ◽  
Physical Properties ◽  
Tensile Properties ◽  
Nickel Alloy ◽  
High Strength ◽  
Heat Treating ◽  
Sour Service ◽  
Minimum Yield

Abstract Sumitomo SMC276-110 (minimum yield strength of 110 ksi, or 758 MPa) is an austenitic high-strength nickel alloy for use in oil country tubular goods as a material suitable for severe sour service. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on corrosion resistance as well as forming and heat treating. Filing Code: Ni-730. Producer or source: Nippon Steel and Sumitomo Metal Corporation.

AWX STEEL

Alloy Digest ◽  
1971 ◽  
Vol 20 (10) ◽  
Keyword(s):  
Fracture Toughness ◽  
Corrosion Resistance ◽  
Shear Strength ◽  
Yield Strength ◽  
Physical Properties ◽  
Surface Treatment ◽  
Tensile Properties ◽  
Heat Treating ◽  
Low Alloy Steel ◽  
Steel Company

Abstract AWX STEEL is a columbium-bearing low-alloy steel supplied at four yield strength levels where excellent formability and good weldability are required and corrosion resistance is not a great factor. This datasheet provides information on composition, physical properties, elasticity, tensile properties, and compressive and shear strength as well as fracture toughness. It also includes information on corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: SA-269. Producer or source: Alan Wood Steel Company.

RMI 70

Alloy Digest ◽  
1979 ◽  
Vol 28 (10) ◽  
Keyword(s):  
Corrosion Resistance ◽  
High Temperature ◽  
Yield Strength ◽  
Physical Properties ◽  
Surface Treatment ◽  
Heat Treating ◽  
Chemical Processing ◽  
Temperature Performance ◽  
Commercially Pure ◽  
Minimum Yield

Abstract RMI 70 is the highest strength grade of commercially pure unalloyed titanium. It has a guaranteed minimum yield strength of 70,000 psi with good ductility and formability. It has excellent resistance to corrosion by marine atmospheres and seawater. It is used in the aircraft, marine and chemical processing industries. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, machining, and surface treatment. Filing Code: Ti-73. Producer or source: RMI Company.

ARMCO FORMABLE 50 HR

Alloy Digest ◽  
1979 ◽  
Vol 28 (3) ◽  
Keyword(s):  
Corrosion Resistance ◽  
Nonmetallic Inclusions ◽  
High Strength ◽  
Heat Treating ◽  
Low Carbon ◽  
Low Alloy Steel ◽  
Controlled Processing ◽  
Hot Rolled ◽  
Special Composition ◽  
Minimum Yield

Abstract ARMCO FORMABLE 50 HR is a hot-rolled high-strength low-alloy steel that provides excellent ductility, weldability and edge-tear resistance at a minimum yield strength of 50,000 psi (345 MPa). It has unusually good fabricating properties that are the result of closely controlled processing of a fully killed, low-carbon, vacuum-degassed, columbium-alloyed steel. This special composition and processing practice minimize harmful nonmetallic inclusions that hamper formability. Typical applications include automotive, construction and farm-equipment components. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fatigue. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: SA-356. Producer or source: Armco Inc., Eastern Steel Division.

J & L VAN-80

Alloy Digest ◽  
1970 ◽  
Vol 19 (9) ◽  
Keyword(s):  
Fracture Toughness ◽  
Corrosion Resistance ◽  
Physical Properties ◽  
Tensile Properties ◽  
Alloy Steel ◽  
Fatigue Resistance ◽  
High Strength ◽  
Heat Treating ◽  
Low Alloy Steel ◽  
Hot Rolled

Abstract J and L VAN-80 is a hot-rolled, controlled-cooled high-strength, low-alloy steel developed for uses where high strength in combination with excellent toughness, cold formability, weldability and fatigue resistance are required. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness and fatigue. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: SA-256. Producer or source: Jones & Laughlin Steel Corporation.

RMI 55

Alloy Digest ◽  
1981 ◽  
Vol 30 (1) ◽  
Keyword(s):  
Corrosion Resistance ◽  
High Temperature ◽  
Yield Strength ◽  
Physical Properties ◽  
Surface Treatment ◽  
Tensile Properties ◽  
Heat Treating ◽  
Temperature Performance ◽  
Commercially Pure ◽  
Minimum Yield

Abstract RMI 55 is a grade of commercially pure unalloyed titanium. It has good ductility and formability with a guaranteed minimum yield strength of 55,000 psi. It has good impact properties at room temperatures and excellent resistance to corrosion by marine atmospheres and seawater. Among its uses are equipment requiring resistance to corrosion and aircraft parts. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: Ti-81. Producer or source: RMI Company.

REM-CRU C-130AM

Alloy Digest ◽  
1954 ◽  
Vol 3 (4) ◽  
Keyword(s):  
Corrosion Resistance ◽  
Shear Strength ◽  
High Temperature ◽  
Yield Strength ◽  
Physical Properties ◽  
Surface Treatment ◽  
Base Alloy ◽  
Heat Treating ◽  
Temperature Performance ◽  
Minimum Yield

Abstract Rem-Cru C-130AM titanium-base alloy was developed with a minimum yield strength of 130,000 psi for fabrication into bars and forgings. It was formerly known as Rem-Cru RC-130B. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and compressive and shear strength as well as creep and fatigue. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: Ti-3. Producer or source: Rem-Cru Titanium Inc..

YOUNGSTOWN YS-T STEEL

Alloy Digest ◽  
1971 ◽  
Vol 20 (3) ◽  
Keyword(s):  
Fracture Toughness ◽  
Corrosion Resistance ◽  
Yield Strength ◽  
Physical Properties ◽  
Tensile Properties ◽  
High Strength ◽  
Heat Treating ◽  
Bend Strength ◽  
Hot Rolled

Abstract Youngstown YS-T Steel comprises a family of hot-rolled, fully-killed, high-strength titanium steels with excellent formability and weldability. They are available in four yield-strength levels: 50,000, 60,000, 70,000 and 80,000 psi. This datasheet provides information on composition, physical properties, elasticity, tensile properties, and bend strength as well as fracture toughness and fatigue. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: SA-261. Producer or source: Youngstown Sheet and Tube Company.

Sign in / Sign up

Export Citation Format

Share Document