ALLOY STEEL 3.5Ni-1.8Cr-0.4Mo-0.1V

Alloy Digest ◽  
1984 ◽  
Vol 33 (12) ◽  
Keyword(s):  
Fracture Toughness ◽  
Corrosion Resistance ◽  
Alloy Steel ◽  
Brittle Failure ◽  
Water Immersion ◽  
Heat Treating ◽  
Water Spray ◽  
Heavy Duty ◽  
High Hardenability ◽  
Steel Mills

Abstract Alloy Steel 3.5Ni-1.8Cr-0.4Mo-0.1V is highly suitable for massive components, usually more than four inches thick. It has high hardenability which in a water-spray or water-immersion quench contributes to the formation of sizeable amounts of martensite along with some bainite, and possibly a little ferrite. On tempering, the martensite adds to toughness and lowers the temperature of transition from tough to brittle failure. This steel is suitable for intermediate-duty and heavy-duty generator and turbine rotors, large axles and shafts, large gears and ship forgings. This datasheet provides information on composition, physical properties, elasticity, and tensile properties as well as fracture toughness. It also includes information on corrosion resistance as well as forming, heat treating, and machining. Filing Code: SA-404. Producer or source: Alloy steel mills and foundries.

AISI 9260

Alloy Digest ◽  
1964 ◽  
Vol 13 (9) ◽  
Keyword(s):  
Fracture Toughness ◽  
Corrosion Resistance ◽  
Physical Properties ◽  
Tensile Properties ◽  
Alloy Steel ◽  
Heat Treating ◽  
Spring Steel ◽  
Heavy Duty ◽  
Steel Mills ◽  
Machine Parts

Abstract AISI 9260 is an oil-hardening type of spring steel and tool steel recommended for repeated and severe impact service. It is also used for heavy duty, shock resistant machine parts. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: SA-167. Producer or source: Alloy steel mills and foundries.

AISI 4161

Alloy Digest ◽  
1984 ◽  
Vol 33 (2) ◽  
Keyword(s):  
Corrosion Resistance ◽  
Alloy Steel ◽  
Temper Embrittlement ◽  
Heat Treating ◽  
Low Alloy Steel ◽  
Heavy Duty ◽  
Good Resistance ◽  
Hand Tools ◽  
High Hardenability ◽  
Steel Mills

Abstract AISI 4161 is a low-alloy steel of the chromium-molybdenum type; it contains nominally 0.61% carbon. It has relatively high hardenability and good resistance to abrasion, impact and fatigue. It is an oil-hardening grade and is recommended for moderately heavy-duty service. This steel has a relatively low tendency to develop temper embrittlement when tempered in the approximate range 850-1100 F. Among its many applications are springs, machine-tool parts, shafting, gears, bolts and heavy-duty hand tools. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: SA-397. Producer or source: Alloy steel mills and foundries.

ALLOY STEEL 3.5Ni-0.25Mo-0.05V

Alloy Digest ◽  
1984 ◽  
Vol 33 (7) ◽  
Keyword(s):  
Fracture Toughness ◽  
Corrosion Resistance ◽  
Physical Properties ◽  
Tensile Properties ◽  
Alloy Steel ◽  
Heat Treating ◽  
Water Spray ◽  
Austenitizing Temperature ◽  
Steel Mills ◽  
Turbine Rotors

Abstract Alloy Steel 3.5 Ni-0.25Mo-0.05V is highly suitable for massive components, usually more than four inches thick. It has only moderate hardenability but 5-inch to 80-inch rounds can be cooled from the austenitizing temperature in air or a water-spray quench to produce ferrite, bainite and martensite of ferrite and bainite. This steel is suitable for light and intermediate-duty generator and turbine rotors, large axles and shafts, large gears and ship forgings. This datasheet provides information on composition, physical properties, elasticity, and tensile properties as well as fracture toughness. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: SA-400. Producer or source: Alloy steel mills and foundries.

SAE 4135

Alloy Digest ◽  
1975 ◽  
Vol 24 (6) ◽  
Keyword(s):  
Fracture Toughness ◽  
Corrosion Resistance ◽  
Physical Properties ◽  
Surface Treatment ◽  
Tensile Properties ◽  
Alloy Steel ◽  
Heat Treating ◽  
Heavy Duty ◽  
Medium Carbon ◽  
Steel Mills

Abstract SAE 4135 is a medium-carbon chromium-molybdenum alloy steel for heavy-duty service. Although nominally an oil-hardening grade, it may be water hardened if proper precautions are exercised. It is used for a wide variety of engineering applications. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness. It also includes information on corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: SA-316. Producer or source: Alloy steel mills and foundries.

SAE 4145

Alloy Digest ◽  
1986 ◽  
Vol 35 (7) ◽  
Keyword(s):  
Corrosion Resistance ◽  
Machine Tool ◽  
Physical Properties ◽  
Surface Treatment ◽  
Alloy Steel ◽  
Heat Treating ◽  
Heavy Duty ◽  
High Hardenability ◽  
Medium Carbon ◽  
Steel Mills

Abstract SAE 4145 is a through-hardening, medium-carbon chromium-molybdenum alloy steel of high hardenability. It is recommended for heavy-duty service and is suitable for a wide variety of engineering uses. Its many applications include gears, axles, flanges, machine tool parts, nitrided parts, bolts, connecting rods, sprockets and valve seats. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: SA-420. Producer or source: Alloy steel mills and foundries.

AISI E3310

Alloy Digest ◽  
1955 ◽  
Vol 4 (11) ◽  
Keyword(s):  
Fracture Toughness ◽  
Physical Properties ◽  
Tensile Properties ◽  
Alloy Steel ◽  
High Surface ◽  
Surface Hardness ◽  
Heat Treating ◽  
Heavy Duty ◽  
High Hardenability ◽  
Steel Mills

Abstract AISI E3310 is a chromium-nickel carburizing steel having exceptionally high hardenability. It is suited for heavy duty parts which must have high surface hardness combined with a strong and tough core. This datasheet provides information on composition, physical properties, hardness, and tensile properties as well as fracture toughness. It also includes information on forming, heat treating, machining, and joining. Filing Code: SA-35. Producer or source: Alloy steel mills and foundries.

AISI 8822

Alloy Digest ◽  
1973 ◽  
Vol 22 (4) ◽  
Keyword(s):  
Fracture Toughness ◽  
Corrosion Resistance ◽  
High Temperature ◽  
Heat Treating ◽  
Heavy Duty ◽  
Core Strength ◽  
High Hardenability ◽  
Nickel Chromium ◽  
Steel Mills ◽  
Temperature Performance

Abstract AISI 8822 is a nickel-chromium-molybdenum carburizing steel of fairly high hardenability. Its high core strength and durable carburized case make it suitable for many heavy-duty applications. It can also be used without carburizing. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness. It also includes information on low and high temperature performance, and corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: SA-288. Producer or source: Alloy steel mills and foundries.

AISI C1060

Alloy Digest ◽  
1969 ◽  
Vol 18 (12) ◽  
Keyword(s):  
Fracture Toughness ◽  
Wear Resistance ◽  
Corrosion Resistance ◽  
Physical Properties ◽  
Tensile Properties ◽  
Alloy Steel ◽  
Heat Treating ◽  
Spring Steel ◽  
High Carbon ◽  
Steel Mills

Abstract AISI C1060 is a high-carbon water or oil hardening tool and spring steel recommended for heavy machinery parts, shafts, springs and miscellaneous tools requiring strength and wear resistance. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness. It also includes information on corrosion resistance as well as heat treating, machining, and joining. Filing Code: CS-32. Producer or source: Carbon and alloy steel mills.

AISI 8615

Alloy Digest ◽  
1965 ◽  
Vol 14 (7) ◽  
Keyword(s):  
Fracture Toughness ◽  
Alloy Steel ◽  
Heat Treating ◽  
Case Hardening ◽  
Low Carbon ◽  
Heavy Duty ◽  
Core Strength ◽  
Nickel Chromium ◽  
Steel Mills ◽  
Case Hardening Steel

Abstract AISI 8615 is a low-carbon, nickel-chromium-molybdenum alloy steel capable of producing high core strength and toughness. It is a case hardening steel recommended for heavy duty gears, cams, shafts, chains, fasteners, piston pins, etc. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness. It also includes information on forming, heat treating, machining, and joining. Filing Code: SA-180. Producer or source: Alloy steel mills and foundries.

NITRALLOY 125

Alloy Digest ◽  
1957 ◽  
Vol 6 (9) ◽  
Keyword(s):  
Fracture Toughness ◽  
Corrosion Resistance ◽  
Physical Properties ◽  
Tensile Properties ◽  
Alloy Steel ◽  
Low Temperatures ◽  
Heat Treating ◽  
Ammonia Gas ◽  
Steel Mills ◽  
Special Alloy

Abstract NITRALLOY 125 (0.20-0.30% C) is a special alloy steel which can be nitrided, that is, surface hardened, without final quenching, by the action of ammonia gas at relatively low temperatures. Nitralloy 125 is also known as Nitralloy H. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: SA-61. Producer or source: Alloy steel mills and foundries.

Sign in / Sign up

Export Citation Format

Share Document