UNS H41370

Alloy Digest ◽  
1988 ◽  
Vol 37 (2) ◽  
Keyword(s):  
Corrosion Resistance ◽  
Physical Properties ◽  
Alloy Steel ◽  
Impact Loading ◽  
Heat Treating ◽  
Low Alloy Steel ◽  
Good Resistance ◽  
Maximum Resistance ◽  
Steel Mills ◽  
Large Sections

Abstract UNS H41370 is a low-alloy steel containing nominally 0.95% Cr and 0.20% Mo. It has good resistance to abrasion, fatigue, and impact. It can be nitrided successfully for maximum resistance to abrasion and wear. It is suitable for severe service characterized by high stresses and impact loading in both small and large sections. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: SA-427. Producer or source: Alloy steel mills and foundries.

AISI 4161

Alloy Digest ◽  
1984 ◽  
Vol 33 (2) ◽  
Keyword(s):  
Corrosion Resistance ◽  
Alloy Steel ◽  
Temper Embrittlement ◽  
Heat Treating ◽  
Low Alloy Steel ◽  
Heavy Duty ◽  
Good Resistance ◽  
Hand Tools ◽  
High Hardenability ◽  
Steel Mills

Abstract AISI 4161 is a low-alloy steel of the chromium-molybdenum type; it contains nominally 0.61% carbon. It has relatively high hardenability and good resistance to abrasion, impact and fatigue. It is an oil-hardening grade and is recommended for moderately heavy-duty service. This steel has a relatively low tendency to develop temper embrittlement when tempered in the approximate range 850-1100 F. Among its many applications are springs, machine-tool parts, shafting, gears, bolts and heavy-duty hand tools. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: SA-397. Producer or source: Alloy steel mills and foundries.

AISI 1330

Alloy Digest ◽  
1974 ◽  
Vol 23 (5) ◽  
Keyword(s):  
Corrosion Resistance ◽  
Physical Properties ◽  
Surface Treatment ◽  
Tensile Properties ◽  
Alloy Steel ◽  
Heat Treating ◽  
Low Alloy Steel ◽  
Steel Mills

Abstract AISI 1330 is a through-hardening low-alloy steel for applications where medium hardenability and strength with low to medium toughness are sufficient. It may be used in the unhardened condition or after quenching in oil or water followed by tempering. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: SA-303. Producer or source: Alloy steel mills and foundries.

SAE 4147

Alloy Digest ◽  
1980 ◽  
Vol 29 (8) ◽  
Keyword(s):  
Corrosion Resistance ◽  
Machine Tool ◽  
Alloy Steel ◽  
Temper Embrittlement ◽  
Heat Treating ◽  
Low Alloy Steel ◽  
Good Resistance ◽  
High Hardenability ◽  
Medium Carbon ◽  
Steel Mills

Abstract SAE 4147 is a medium-carbon low-alloy steel with relatively high hardenability and good resistance to abrasion, fatigue and impact. It is recommended for moderately severe service. Although nominally an oil-hardening grade, SAE 4147 may be water hardened if suitable precautions are taken to minimize the danger of cracking during quenching. It has a relatively low tendency for the development of temper embrittlement during tempering in the range 850-1100 F. Typical applications comprise gears, shafting, machine-tool parts, clutch parts and connecting rods. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: SA-375. Producer or source: Alloy steel mills and foundries.

AISI 4137

Alloy Digest ◽  
1979 ◽  
Vol 28 (12) ◽  
Keyword(s):  
Corrosion Resistance ◽  
Physical Properties ◽  
Surface Treatment ◽  
Alloy Steel ◽  
Temper Embrittlement ◽  
Heat Treating ◽  
Low Alloy Steel ◽  
Heavy Duty ◽  
Medium Carbon ◽  
Steel Mills

Abstract AISI 4137 is a medium-carbon low-alloy steel suitable for heavy-duty service. It is nominally an oil-hardening steel; however, it may be water hardened if suitable precautions are taken to avoid cracking. Its many uses include axles, fittings, gears, crankshafts and nitrided parts. It has a low tendency to develop temper embrittlement. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: SA-366. Producer or source: Alloy steel mills and foundries.

AISI 4142

Alloy Digest ◽  
1980 ◽  
Vol 29 (3) ◽  
Keyword(s):  
Corrosion Resistance ◽  
Physical Properties ◽  
Tensile Properties ◽  
Alloy Steel ◽  
Temper Embrittlement ◽  
Heat Treating ◽  
Low Alloy Steel ◽  
Heavy Duty ◽  
Medium Carbon ◽  
Steel Mills

Abstract AISI 4142 is a medium-carbon low-alloy steel recommended for moderately heavy-duty service. It is nominally an oil-hardening grade; however, it may be water hardened if suitable precautions are taken to avoid cracking. It has a relatively low tendency to develop temper embrittlement. It has a variety of applications including bolts, crankshafts, wrenches, clutch parts and shafting. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: SA-370. Producer or source: Alloy steel mills and foundries.

AISI C1060

Alloy Digest ◽  
1969 ◽  
Vol 18 (12) ◽  
Keyword(s):  
Fracture Toughness ◽  
Wear Resistance ◽  
Corrosion Resistance ◽  
Physical Properties ◽  
Tensile Properties ◽  
Alloy Steel ◽  
Heat Treating ◽  
Spring Steel ◽  
High Carbon ◽  
Steel Mills

Abstract AISI C1060 is a high-carbon water or oil hardening tool and spring steel recommended for heavy machinery parts, shafts, springs and miscellaneous tools requiring strength and wear resistance. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness. It also includes information on corrosion resistance as well as heat treating, machining, and joining. Filing Code: CS-32. Producer or source: Carbon and alloy steel mills.

AISI 5135

Alloy Digest ◽  
1976 ◽  
Vol 25 (8) ◽  
Keyword(s):  
Corrosion Resistance ◽  
Physical Properties ◽  
Surface Treatment ◽  
Tensile Properties ◽  
Alloy Steel ◽  
Heat Treating ◽  
Steel Mills

Abstract AISI 5135 is a low-alloy, through-hardening steel containing nominally 0.95% chromium. It is recommended for applications where medium hardenability, moderate strength and low-to-moderate toughness are sufficient. It may be used in the unhardened (annealed, as-rolled, or normalized) condition or after quenching in oil followed by tempering. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: SA-323. Producer or source: Alloy steel mills and foundries.

SAE 4032

Alloy Digest ◽  
1975 ◽  
Vol 24 (9) ◽  
Keyword(s):  
Corrosion Resistance ◽  
Physical Properties ◽  
Surface Treatment ◽  
Tensile Properties ◽  
Alloy Steel ◽  
Automobile Industry ◽  
Temper Embrittlement ◽  
Heat Treating ◽  
Steel Mills

Abstract SAE 4032 is an alloy steel used extensively in the automobile industry. It combines moderate strength with good toughness in the quenched and tempered condition because it is relatively free from temper embrittlement when tempered in the range 850-1100 F. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: SA-319. Producer or source: Alloy steel mills and foundries.

NITRALLOY 125

Alloy Digest ◽  
1957 ◽  
Vol 6 (9) ◽  
Keyword(s):  
Fracture Toughness ◽  
Corrosion Resistance ◽  
Physical Properties ◽  
Tensile Properties ◽  
Alloy Steel ◽  
Low Temperatures ◽  
Heat Treating ◽  
Ammonia Gas ◽  
Steel Mills ◽  
Special Alloy

Abstract NITRALLOY 125 (0.20-0.30% C) is a special alloy steel which can be nitrided, that is, surface hardened, without final quenching, by the action of ammonia gas at relatively low temperatures. Nitralloy 125 is also known as Nitralloy H. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: SA-61. Producer or source: Alloy steel mills and foundries.

ALLOY STEEL 1.8 Cu-1.0 Mn-1.2 Si

Alloy Digest ◽  
1976 ◽  
Vol 25 (10) ◽  
Keyword(s):  
Tensile Strength ◽  
Corrosion Resistance ◽  
Yield Strength ◽  
Physical Properties ◽  
Tensile Properties ◽  
Alloy Steel ◽  
Cast Steel ◽  
Heat Treating ◽  
Low Carbon ◽  
Steel Mills

Abstract Alloy Steel 1.8 Cu-1.0 Mn-1.2 Si is a low-carbon (0.20% max.) cast steel designed to provide intermediate tensile and yield strength. Copper lowers the ductility and toughness of cast steel but, for a given increase in tensile strength, the loss of ductility and toughness is less if copper is added than if carbon is increased. This steel has many uses such as booms, long shafting and gears. This datasheet provides information on composition, physical properties, elasticity, and tensile properties. It also includes information on corrosion resistance as well as casting, heat treating, machining, and joining. Filing Code: SA-325. Producer or source: Alloy steel mills and foundries.

Sign in / Sign up

Export Citation Format

Share Document