CARPENTER STAINLESS 18-18 PLUS

Alloy Digest ◽  
1977 ◽  
Vol 26 (10) ◽  
Keyword(s):  
Stainless Steel ◽  
Corrosion Resistance ◽  
High Temperature ◽  
Heat Treating ◽  
304 Stainless Steel ◽  
High Temperature Strength ◽  
Cold Forming ◽  
Aisi Type ◽  
Type 304 ◽  
Type 304 Stainless Steel

Abstract CARPENTER STAINLESS 18-18 PLUS is an 18 chromium-18 manganese austenitic stainless steel which provides twice the yield strength of AISI Type 304 stainless steel and corrosion resistance similar to AISI Type 316 in some media. It has excellent ductility and toughness and good high-temperature strength. Although Carpenter 18-18 Plus contains no nickel, it is nonmagnetic both in the annealed condition and after severe cold forming. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness. It also includes information on low and high temperature performance, and corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: SS-344. Producer or source: Carpenter.

PROJECT 70/PROJECT 7000 STAINLESS TYPE 304

Alloy Digest ◽  
1997 ◽  
Vol 46 (9) ◽  
Keyword(s):  
Fracture Toughness ◽  
Stainless Steel ◽  
Corrosion Resistance ◽  
High Temperature ◽  
Heat Treating ◽  
304 Stainless Steel ◽  
Temperature Performance ◽  
Aisi Type ◽  
Type 304 ◽  
Type 304 Stainless Steel

Abstract Project 70 and Project 7000 Type 304 stainless steel are versions of conventional AISI Type 304 (18Cr-8Ni) stainless steel having improved machinability and higher tensile and creep strengths. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness and creep. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: SS-418. Producer or source: Carpenter. Originally published January 1983, revised September 1997.

ENDURO 18-8STi

Alloy Digest ◽  
1963 ◽  
Vol 12 (11) ◽  
Keyword(s):  
Fracture Toughness ◽  
Stainless Steel ◽  
Corrosion Resistance ◽  
High Temperature ◽  
Heat Treating ◽  
Carbide Precipitation ◽  
304 Stainless Steel ◽  
Temperature Performance ◽  
Type 304 ◽  
Type 304 Stainless Steel

Abstract ENDURO 18-8STi is the titanium-type 304 stainless steel stabilized by titanium. It is not made sensitive to intergranular corrosion by heating within the carbide precipitation range. It is recommended for use at temperatures up to 1600 F. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness, creep, and fatigue. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: SS-149. Producer or source: Republic Steel Corporation.

ALLEGHENY LUDLUM TYPE 334

Alloy Digest ◽  
2001 ◽  
Vol 50 (10) ◽  
Keyword(s):  
Stainless Steel ◽  
Corrosion Resistance ◽  
High Temperature ◽  
Austenitic Stainless Steel ◽  
Electric Heating ◽  
Heat Treating ◽  
304 Stainless Steel ◽  
Temperature Performance ◽  
Type 304 ◽  
Type 304 Stainless Steel

Abstract Allegheny Ludlum Type 334 is an austenitic stainless steel with alloying elements of aluminum and titanium. These additions, along with its higher chromium and nickel levels, give the alloy excellent strength and oxidation resistance, especially when compared to Type 304 stainless steel. Applications include sheathing for electric heating elements. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, and joining. Filing Code: SS-833. Producer or source: Allegheny Ludlum Corporation.

NITRONIC 32

Alloy Digest ◽  
1975 ◽  
Vol 24 (11) ◽  
Keyword(s):  
Fracture Toughness ◽  
Stainless Steel ◽  
Corrosion Resistance ◽  
Heat Treating ◽  
Advanced Materials ◽  
304 Stainless Steel ◽  
Nickel Chromium ◽  
Aisi Type ◽  
Type 304 ◽  
Type 304 Stainless Steel

Abstract NITRONIC 32 is basically a low-nickel chromium-manganese austenitic stainless steel strengthened by an addition of nitrogen. It has annealed strength approximately two times that of AISI Type 304 stainless steel and comparable corrosion resistance. It is used in such applications as fasteners, springs, antennae, shafting and pole-line hardware. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: SS-320. Producer or source: Armco Steel Corporation, Advanced Materials Division.

ALLEGHENY LUDLUM AL 304DA

Alloy Digest ◽  
2000 ◽  
Vol 49 (4) ◽  
Keyword(s):  
Stainless Steel ◽  
Corrosion Resistance ◽  
High Temperature ◽  
Carbon Steel ◽  
Physical Properties ◽  
Heat Treating ◽  
304 Stainless Steel ◽  
Temperature Performance ◽  
Type 304 ◽  
Type 304 Stainless Steel

Abstract Allegheny Ludlum AL 304DA is a composite of three plies consisting of carbon steel surrounded on both sides with type 304 stainless steel. This combination supplies corrosion resistance with good ductility for applications like cookware. This datasheet provides information on composition, physical properties, microstructure, hardness, elasticity, and tensile properties. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, joining, and surface treatment. Filing Code: SS-780. Producer or source: Allegheny Ludlum Corporation.

OUTOKUMPU TYPE 630

Alloy Digest ◽  
2016 ◽  
Vol 65 (2) ◽  
Keyword(s):  
Fracture Toughness ◽  
Stainless Steel ◽  
Corrosion Resistance ◽  
Physical Properties ◽  
High Performance ◽  
High Strength ◽  
Heat Treating ◽  
304 Stainless Steel ◽  
Type 304 ◽  
Type 304 Stainless Steel

Abstract Outokumpu Type 630 is a martensitic age hardenable alloy of composition 17Cr-4Ni. The alloy has high strength and corrosion resistance similar to that of Type 304 stainless steel. This datasheet provides information on composition, physical properties, hardness, and tensile properties as well as fracture toughness. It also includes information on corrosion resistance as well as forming, heat treating, and joining. Filing Code: SS-1238. Producer or source: Outokumpu High Performance Stainless.

scholarly journals Improvement of High Temperature Strength of Type 304 Stainless Steel by Small Additions of Titanium and Niobium

1968 ◽  
Vol 54 (14) ◽  
pp. 1472-1486 ◽  
Author(s):  
Takayuki SHINODA ◽  
Tohru MIMINO ◽  
Kazuhisa KINOSHITA ◽  
Isao MINEGISHI
Keyword(s):  
Stainless Steel ◽  
High Temperature ◽  
304 Stainless Steel ◽  
High Temperature Strength ◽  
Type 304 ◽  
Type 304 Stainless Steel
Sign in / Sign up

Export Citation Format

Share Document