ARMCO 409 Ni

Alloy Digest ◽  
1996 ◽  
Vol 45 (12) ◽  
Keyword(s):  
Fracture Toughness ◽  
Stainless Steel ◽  
Corrosion Resistance ◽  
Physical Properties ◽  
Tensile Properties ◽  
Stainless Steels ◽  
Fine Grain ◽  
Heat Shields

Abstract Armco 409 Ni is a fine-grain stainless steel developed for applications more than 0.120 in. thick needing an alloy superior to Type 409 stainless steels in weld formability and toughness. Applications include coal-handling equipment, transportation containers, mixers, liners, exhaust flanges, heat shields, and cyclones. This datasheet provides information on composition, physical properties, and tensile properties as well as fracture toughness. It also includes information on corrosion resistance as well as forming and joining. Filing Code: SS-663. Producer or source: Armco Inc., Specialty Flat-Rolled Steels.

PROJECT 70/PROJECT 7000 STAINLESS TYPE 304L

Alloy Digest ◽  
1997 ◽  
Vol 46 (11) ◽  
Keyword(s):  
Fracture Toughness ◽  
Stainless Steel ◽  
Corrosion Resistance ◽  
Physical Properties ◽  
Tensile Properties ◽  
Stainless Steels ◽  
Heat Treating ◽  
304L Stainless Steel ◽  
Aisi Type

Abstract Project 70 and Project 7000 Type 304L stainless steels are improved machining versions of conventional AISI Type 304L stainless steel. They have higher tensile and creep strengths than conventional 18-8 stainless steels. This datasheet provides information on composition, physical properties, hardness, and tensile properties as well as fracture toughness. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: SS-513. Producer or source: Carpenter. Originally published July 1990, revised November 1997.

UNILOY 303, 303Se

Alloy Digest ◽  
1990 ◽  
Vol 39 (5) ◽  
Keyword(s):  
Fracture Toughness ◽  
Stainless Steel ◽  
Corrosion Resistance ◽  
Carbon Steel ◽  
Physical Properties ◽  
Tensile Properties ◽  
Stainless Steels ◽  
Austenitic Stainless Steels ◽  
Heat Treating ◽  
General Purpose

Abstract UNILOY 303 and 303Se are improved machinability grades of 18-8 general purpose austenitic stainless steels. Machinability is respectively improved by additions of sulfur or selenium. Whereas standard 18-8 stainless steel had a machinability rating about 40-50% that of AISI B1112 free-machining carbon steel, these steels have a rating of about 70% that of AISI B1112. UNILOY 303Se is preferred over UNILOY 303 where machined finish and good cold formability and corrosion resistance are desired. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: SS-512. Producer or source: Cytemp Cyclops.

PROJECT 70/PROJECT 7000 STAINLESS TYPE 316

Alloy Digest ◽  
1997 ◽  
Vol 46 (10) ◽  
Keyword(s):  
Fracture Toughness ◽  
Stainless Steel ◽  
Corrosion Resistance ◽  
High Temperature ◽  
Physical Properties ◽  
Tensile Properties ◽  
Stainless Steels ◽  
Heat Treating ◽  
Temperature Performance ◽  
Aisi Type

Abstract Project 70 and Project 7000 Type 316 stainless steels are versions of conventional AISI Type 316 (18 Cr-8 Ni) stainless steel having improved machinability and higher tensile and creep strengths. This datasheet provides information on composition, physical properties, hardness, and tensile properties as well as fracture toughness and creep. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: SS-339. Producer or source: Carpenter. Originally published November 1990, revised October 1997.

AISI TYPE 303 and 303Se

Alloy Digest ◽  
1961 ◽  
Vol 10 (12) ◽  
Keyword(s):  
Fracture Toughness ◽  
Stainless Steel ◽  
Corrosion Resistance ◽  
High Temperature ◽  
Physical Properties ◽  
Stainless Steels ◽  
Heat Treating ◽  
Steel Mills ◽  
Temperature Performance ◽  
Aisi Type

Abstract AISI Types 303 and 303 Se austenitic chromium nickel stainless steels to which elements have been added to improve machining and non-seizing characteristics. They are the most readily machinable of all the austenitic chromium nickel grades and are suitable for use in automatic screw machines. They are widely used to minimize seizing and galling. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness, creep, and fatigue. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: SS-126. Producer or source: Stainless steel mills.

ALZ 316

Alloy Digest ◽  
1999 ◽  
Vol 48 (8) ◽  
Keyword(s):  
Mechanical Properties ◽  
Stainless Steel ◽  
Corrosion Resistance ◽  
Austenitic Stainless Steel ◽  
Physical Properties ◽  
Tensile Properties ◽  
Stainless Steels ◽  
Austenitic Stainless Steels ◽  
Heat Treating

Abstract ALZ 316 is an austenitic stainless steel with good formability, corrosion resistance, toughness, and mechanical properties. It is the basic grade of the stainless steels, containing 2 to 3% molybdenum. After the 304 series, the molybdenum-containing stainless steels are the most widely used austenitic stainless steels. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, and joining. Filing Code: SS-756. Producer or source: ALZ nv.

PROJECT 70/PROJECT 7000 STAINLESS TYPE 203

Alloy Digest ◽  
1997 ◽  
Vol 46 (8) ◽  
Keyword(s):  
Stainless Steel ◽  
Corrosion Resistance ◽  
Physical Properties ◽  
Tensile Properties ◽  
Magnetic Permeability ◽  
Stainless Steels ◽  
Heat Treating ◽  
High Manganese ◽  
Aisi Type ◽  
Alternative Materials

Abstract Project 70 and Project 7000 Type 203 stainless steels are alternative materials to AISI Type 303, resulfurized stainless steel having improved machinability. High manganese and copper are substituted for some nickel resulting in a stable austenitic structure having low magnetic permeability. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, and joining. Filing Code: SS-505. Producer or source: Carpenter. Originally published May 1989, revised August 1997.

ACI TYPE CF-12M

Alloy Digest ◽  
1965 ◽  
Vol 14 (4) ◽  
Keyword(s):  
Fracture Toughness ◽  
Stainless Steel ◽  
Corrosion Resistance ◽  
High Temperature ◽  
Physical Properties ◽  
Tensile Properties ◽  
Alloy Steel ◽  
Elevated Temperatures ◽  
Heat Treating ◽  
Temperature Performance

Abstract Type CF-12M is a chromium-nickel-molybdenum alloy steel having corrosion resistance and good strength at moderately elevated temperatures. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness and creep. It also includes information on low and high temperature performance, and corrosion resistance as well as casting, heat treating, machining, and joining. Filing Code: SS-167. Producer or source: Stainless steel foundries.

SOLEIL C5

Alloy Digest ◽  
1995 ◽  
Vol 44 (5) ◽  
Keyword(s):  
Fracture Toughness ◽  
Stainless Steel ◽  
Corrosion Resistance ◽  
Shear Strength ◽  
Physical Properties ◽  
Tensile Properties ◽  
Fresh Water ◽  
Martensitic Stainless Steel ◽  
Heat Treating ◽  
Good Corrosion Resistance

Abstract SOLEIL C5 is a 13% chromium 4% nickel martensitic stainless steel with improved toughness and good corrosion resistance to fresh water. Shafts and compressor impellers for hydraulic applications is the area of primary usage. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and shear strength as well as fracture toughness and fatigue. It also includes information on forming, heat treating, and joining. Filing Code: SS-595. Producer or source: Creusot-Marrel.

ACI TYPE CF-20

Alloy Digest ◽  
1976 ◽  
Vol 25 (1) ◽  
Keyword(s):  
Fracture Toughness ◽  
Stainless Steel ◽  
Corrosion Resistance ◽  
Physical Properties ◽  
Tensile Properties ◽  
Nickel Alloy ◽  
Heat Treating ◽  
Iron Chromium

Abstract Type CF-20 is an austenitic iron-chromium-nickel alloy that serves satisfactorily in many types of oxidizing corrosion service where its superior ductility and toughness make it more useful that the ferritic iron-chromium ACI Type CB-30. Its many uses include the architectural, food and chemical industries. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness. It also includes information on corrosion resistance as well as casting, heat treating, machining, and joining. Filing Code: SS-323. Producer or source: Stainless steel foundries.

PROJECT 70/PROJECT 7000 STAINLESS TYPE 303

Alloy Digest ◽  
1997 ◽  
Vol 46 (6) ◽  
Keyword(s):  
Fracture Toughness ◽  
Corrosion Resistance ◽  
Physical Properties ◽  
Tensile Properties ◽  
Tool Life ◽  
Stainless Steels ◽  
Heat Treating ◽  
Machining Time ◽  
Type Machine

Abstract Project 70 stainless type 303 and Project 7000 stainless type 303 are free-machining stainless steels of the austenitic chromium-nickel type. They offer significantly improved machinability and longer tool life. These steels are suited particularly for automatic bar-machine and Swiss-type machine operations where longer tool life results in more productive machining time. Applications include shafts, valve bodies, valves, valve trim, and fittings. This datasheet provides information on composition, physical properties, hardness, and tensile properties as well as fracture toughness and creep. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: SS-409. Producer or source: Carpenter. Originally published June 1982, revised June 1997.

Sign in / Sign up

Export Citation Format

Share Document