UNILOY 303, 303Se

Alloy Digest ◽  
1990 ◽  
Vol 39 (5) ◽  
Keyword(s):  
Fracture Toughness ◽  
Stainless Steel ◽  
Corrosion Resistance ◽  
Carbon Steel ◽  
Physical Properties ◽  
Tensile Properties ◽  
Stainless Steels ◽  
Austenitic Stainless Steels ◽  
Heat Treating ◽  
General Purpose

Abstract UNILOY 303 and 303Se are improved machinability grades of 18-8 general purpose austenitic stainless steels. Machinability is respectively improved by additions of sulfur or selenium. Whereas standard 18-8 stainless steel had a machinability rating about 40-50% that of AISI B1112 free-machining carbon steel, these steels have a rating of about 70% that of AISI B1112. UNILOY 303Se is preferred over UNILOY 303 where machined finish and good cold formability and corrosion resistance are desired. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: SS-512. Producer or source: Cytemp Cyclops.

ALZ 316

Alloy Digest ◽  
1999 ◽  
Vol 48 (8) ◽  
Keyword(s):  
Mechanical Properties ◽  
Stainless Steel ◽  
Corrosion Resistance ◽  
Austenitic Stainless Steel ◽  
Physical Properties ◽  
Tensile Properties ◽  
Stainless Steels ◽  
Austenitic Stainless Steels ◽  
Heat Treating

Abstract ALZ 316 is an austenitic stainless steel with good formability, corrosion resistance, toughness, and mechanical properties. It is the basic grade of the stainless steels, containing 2 to 3% molybdenum. After the 304 series, the molybdenum-containing stainless steels are the most widely used austenitic stainless steels. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, and joining. Filing Code: SS-756. Producer or source: ALZ nv.

PROJECT 70/PROJECT 7000 STAINLESS TYPE 304L

Alloy Digest ◽  
1997 ◽  
Vol 46 (11) ◽  
Keyword(s):  
Fracture Toughness ◽  
Stainless Steel ◽  
Corrosion Resistance ◽  
Physical Properties ◽  
Tensile Properties ◽  
Stainless Steels ◽  
Heat Treating ◽  
304L Stainless Steel ◽  
Aisi Type

Abstract Project 70 and Project 7000 Type 304L stainless steels are improved machining versions of conventional AISI Type 304L stainless steel. They have higher tensile and creep strengths than conventional 18-8 stainless steels. This datasheet provides information on composition, physical properties, hardness, and tensile properties as well as fracture toughness. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: SS-513. Producer or source: Carpenter. Originally published July 1990, revised November 1997.

ARCELORMITTAL K36X

Alloy Digest ◽  
2010 ◽  
Vol 59 (6) ◽  
Keyword(s):  
Stainless Steel ◽  
Corrosion Resistance ◽  
Physical Properties ◽  
Tensile Properties ◽  
Ferritic Stainless Steel ◽  
Stainless Steels ◽  
Lower Cost ◽  
Austenitic Stainless Steels ◽  
Heat Treating ◽  
Bend Strength

Abstract ArcelorMittal K36X is a ferritic stainless steel, mostly used as a stable price lower cost substitute for nickel containing austenitic stainless steels for corrosion applications. The “X” indicates this alloy is a muffler grade. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and bend strength. It also includes information on corrosion resistance as well as forming, heat treating, and joining. Filing Code: SS-1068. Producer or source: Arcelor Stainless Processing LLC.

ARCELORMITTAL K03

Alloy Digest ◽  
2009 ◽  
Vol 58 (8) ◽  
Keyword(s):  
Stainless Steel ◽  
Corrosion Resistance ◽  
High Temperature ◽  
Physical Properties ◽  
Tensile Properties ◽  
Stainless Steels ◽  
Lower Cost ◽  
Austenitic Stainless Steels ◽  
Heat Treating ◽  
Temperature Performance

Abstract ArcelorMittal K03 is a ferritic stainless steel, mostly used as a stable price, lower-cost substitute for nickel-containing austenitic stainless steels. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, and joining. Filing Code: SS-1042. Producer or source: Arcelor Stainless Processing LLC.

ALLEGHENY LUDLUM AL 2205 ALLOY

Alloy Digest ◽  
1985 ◽  
Vol 34 (8) ◽  
Keyword(s):  
Fracture Toughness ◽  
Corrosion Resistance ◽  
Yield Strength ◽  
Physical Properties ◽  
Tensile Properties ◽  
Stainless Steels ◽  
Austenitic Stainless Steels ◽  
Heat Treating ◽  
The Family

Abstract ALLEGHENY LUDLUM AL 2205 ALLOY is in the family of duplex alloys in which added nitrogen significantly improves corrosion resistance, especially in the welded condition. The microstructure consists of a balanced mixture of austenitic and ferritic phases. Its corrosion resistance to many environments is superior to Types 316 or 317 and it has a yield strength more than double that of AISI conventional austenitic stainless steels. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness. It also includes information on corrosion resistance as well as forming, heat treating, and machining. Filing Code: SS-462. Producer or source: Allegheny Ludlum Corporation.

CRUCIBLE 410

Alloy Digest ◽  
1958 ◽  
Vol 7 (10) ◽  
Keyword(s):  
Fracture Toughness ◽  
Stainless Steel ◽  
Corrosion Resistance ◽  
High Temperature ◽  
Physical Properties ◽  
Tensile Properties ◽  
Heat Treating ◽  
General Purpose ◽  
Steel Mills ◽  
Temperature Performance

Abstract CRUCIBLE 410 is a general purpose, heat-treatable stainless steel of the straight chromium type. It is adaptable for general purpose corrosion resisting and heat resisting applications. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness, creep, and fatigue. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: SS-80. Producer or source: Stainless steel mills.

PROJECT 70/PROJECT 7000 STAINLESS TYPE 316

Alloy Digest ◽  
1997 ◽  
Vol 46 (10) ◽  
Keyword(s):  
Fracture Toughness ◽  
Stainless Steel ◽  
Corrosion Resistance ◽  
High Temperature ◽  
Physical Properties ◽  
Tensile Properties ◽  
Stainless Steels ◽  
Heat Treating ◽  
Temperature Performance ◽  
Aisi Type

Abstract Project 70 and Project 7000 Type 316 stainless steels are versions of conventional AISI Type 316 (18 Cr-8 Ni) stainless steel having improved machinability and higher tensile and creep strengths. This datasheet provides information on composition, physical properties, hardness, and tensile properties as well as fracture toughness and creep. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: SS-339. Producer or source: Carpenter. Originally published November 1990, revised October 1997.

AISI 1025

Alloy Digest ◽  
1972 ◽  
Vol 21 (3) ◽  
Keyword(s):  
Fracture Toughness ◽  
Corrosion Resistance ◽  
Carbon Steel ◽  
Physical Properties ◽  
Heat Treating ◽  
General Purpose ◽  
Medium Carbon Steel ◽  
Medium Carbon ◽  
Steel Mills ◽  
Cold Worked

Abstract AISI 1025 is a low-to-medium-carbon steel used in the hot-worked, cold-worked, normalized or water-quenched-and-tempered condition for general-purpose construction and engineering. It is also used for case-hardened components. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness. It also includes information on corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: CS-47. Producer or source: Carbon and alloy steel mills.

UNS A02080

Alloy Digest ◽  
1988 ◽  
Vol 37 (1) ◽  
Keyword(s):  
Fracture Toughness ◽  
Corrosion Resistance ◽  
Shear Strength ◽  
Physical Properties ◽  
Tensile Properties ◽  
Heat Treating ◽  
General Purpose ◽  
Sand Casting ◽  
Casting Alloy ◽  
Heat Treated

Abstract UNS No. A02080 is a heat-treatable casting alloy characterized by good castability, machinability and resistance to corrosion. It is produced by sand casting and is a general-purpose alloy recommended in both the as-cast and heat-treated conditions. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and compressive and shear strength as well as fracture toughness and fatigue. It also includes information on corrosion resistance as well as casting, heat treating, machining, and joining. Filing Code: Al-286. Producer or source: Various aluminum companies.

UGIMA 4404 HM

Alloy Digest ◽  
2013 ◽  
Vol 62 (9) ◽  
Keyword(s):  
Stainless Steel ◽  
Corrosion Resistance ◽  
Austenitic Stainless Steel ◽  
Physical Properties ◽  
Tensile Properties ◽  
Heat Treating ◽  
General Purpose ◽  
Corrosion Resistant

Abstract Ugima 440 HM is a general-purpose, corrosion resistant austenitic stainless steel with added molybdenum (300 series with 2–2.5% Mo). It features improved machinability compared with 4404 or 316L. This datasheet provides information on composition, physical properties, elasticity, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: SS-1156. Producer or source: Schmolz + Bickenbach USA Inc..

Sign in / Sign up

Export Citation Format

Share Document