FERRO-TIC M-6

Alloy Digest ◽  
1974 ◽  
Vol 23 (1) ◽  
Keyword(s):  
Corrosion Resistance ◽  
Titanium Carbide ◽  
Physical Properties ◽  
Surface Treatment ◽  
Martensitic Steel ◽  
Heat Treating ◽  
American Corporation

Abstract FERRO-TIC M-6 is comprised of ultra-hard titanium carbide grains dispersed through a matrix of age-hardenable martensitic steel. There are three grades: regular M-6 and M-6A and M-6B. The latter two have increased carbide which gives greater hardness at some sacrifice in machinability'. This datasheet provides information on composition, physical properties, hardness, and elasticity as well as creep. It also includes information on corrosion resistance as well as heat treating, machining, and surface treatment. Filing Code: TS-266. Producer or source: Chromalloy American Corporation, Sintercast Division.

FERRO-TIC CM

Alloy Digest ◽  
1973 ◽  
Vol 22 (4) ◽  
Keyword(s):  
Corrosion Resistance ◽  
Titanium Carbide ◽  
Physical Properties ◽  
Surface Treatment ◽  
Tool Steel ◽  
Heat Treating ◽  
Wear Resistant ◽  
High Chromium ◽  
American Corporation ◽  
Forming Tools

Abstract FERRO-TIC CM is a cemented carbide comprising titanium carbide in a matrix of high-chromium tool steel. It is machinable and heat treatable by conventional means, and is recommended for heavy stamping or forming tools and wear-resistant components. This datasheet provides information on composition, physical properties, hardness, and elasticity. It also includes information on corrosion resistance as well as heat treating, machining, joining, and surface treatment. Filing Code: TS-253. Producer or source: Chromalloy American Corporation, Sintercast Division.

FERRO-TIC CN-5

Alloy Digest ◽  
1976 ◽  
Vol 25 (8) ◽  
Keyword(s):  
Wear Resistance ◽  
Corrosion Resistance ◽  
Physical Properties ◽  
Surface Treatment ◽  
Sea Water ◽  
Operating Temperature ◽  
Heat Treating ◽  
Alloy Matrix ◽  
American Corporation ◽  
Copper Nickel Alloy

Abstract FERRO-TIC CN-5 is comprised of ultrahard tungsten carbide micrograins cemented by an age-hardenable copper-nickel alloy matrix. It is particularly suited to resist sea water corrosion. Its structure provides a wear resistance that is unattainable in other alloys with similar corrosion resistance. Its maximum operating temperature is 850 F. This datasheet provides information on composition, physical properties, hardness, and elasticity. It also includes information on corrosion resistance as well as forming, heat treating, machining, and surface treatment. Filing Code: Cu-316. Producer or source: Chromalloy American Corporation.

FERRO-TIC SK

Alloy Digest ◽  
1975 ◽  
Vol 24 (2) ◽  
Keyword(s):  
Fracture Toughness ◽  
Corrosion Resistance ◽  
Titanium Carbide ◽  
Physical Properties ◽  
Surface Treatment ◽  
Tensile Properties ◽  
Tool Steel ◽  
Heat Treating ◽  
Hot Working ◽  
Heat Treated

Abstract FERRO-TIC SK is a cemented carbide comprising titanium carbide in a matrix of 5% chromium tool steel. It can be heat treated and machined by conventional means and is recommended for cold and hot-working dies and heavy-impact tools. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness. It also includes information on corrosion resistance as well as heat treating, machining, joining, and surface treatment. Filing Code: TS-284. Producer or source: Chromalloy Metal Tectonics Company.

ALLEGHENY LUDLUM AL276

Alloy Digest ◽  
1996 ◽  
Vol 45 (1) ◽  
Keyword(s):  
Corrosion Resistance ◽  
High Temperature ◽  
Power Plant ◽  
Physical Properties ◽  
Surface Treatment ◽  
Tensile Properties ◽  
Crevice Corrosion ◽  
Heat Treating ◽  
Chemical Plants ◽  
Temperature Performance

Abstract Allegheny Ludlum AL276 is widely used in the most severe environments found in chemical plants and in power plant desulfurization systems. The high molybdenum level with tungsten gives excellent pitting and crevice corrosion resistance. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on low and high temperature performance, and corrosion resistance as well as forming, heat treating, joining, and surface treatment. Filing Code: Ni-497. Producer or source: Allegheny Ludlum Corporation.

NILO ALLOY 36

Alloy Digest ◽  
1987 ◽  
Vol 36 (8) ◽  
Keyword(s):  
Thermal Expansion ◽  
Corrosion Resistance ◽  
High Temperature ◽  
Physical Properties ◽  
Surface Treatment ◽  
Constant Coefficient ◽  
Coefficient Of Thermal Expansion ◽  
Heat Treating ◽  
Temperature Performance ◽  
Iron Nickel

Abstract NILO alloy 36 is a binary iron-nickel alloy having a very low and essentially constant coefficient of thermal expansion at atmospheric temperatures. This datasheet provides information on composition, physical properties, elasticity, and tensile properties. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: Fe-79. Producer or source: Inco Alloys International Inc..

UNITEMP N-155

Alloy Digest ◽  
1971 ◽  
Vol 20 (12) ◽  
Keyword(s):  
Fracture Toughness ◽  
Corrosion Resistance ◽  
High Temperature ◽  
Physical Properties ◽  
Surface Treatment ◽  
Wide Temperature Range ◽  
Heat Treating ◽  
Combustion Chambers ◽  
Temperature Performance ◽  
Oxidation And Corrosion

Abstract UNITEMP N-155 is an iron-base austenitic alloy used over a wide temperature range from subzero to about 1800 or 1900 F. It has relatively good oxidation and corrosion resistance. It is used in such applications as turbine rotors, shafts and blades, afterburner parts, nozzles and combustion chambers. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness, creep, and fatigue. It also includes information on high temperature performance as well as forming, heat treating, joining, and surface treatment. Filing Code: Fe-48. Producer or source: Cyclops Corporation.

PYROTOOL A

Alloy Digest ◽  
1971 ◽  
Vol 20 (4) ◽  
Keyword(s):  
Corrosion Resistance ◽  
High Temperature ◽  
Physical Properties ◽  
Surface Treatment ◽  
Tensile Properties ◽  
High Strength ◽  
Heat Treating ◽  
Good Ductility ◽  
Extrusion Dies ◽  
Temperature Performance

Abstract PYROTOOL A has been designed to display high strength and good ductility at temperatures up to 1200 F. It is used for high-temperature tooling, extrusion dies, liners, dummy blocks, forging dies, mandrels, holders, etc. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: Fe-47. Producer or source: Carpenter.

UNISPAN LR35

Alloy Digest ◽  
1971 ◽  
Vol 20 (1) ◽  
Keyword(s):  
Thermal Expansion ◽  
Corrosion Resistance ◽  
High Temperature ◽  
Physical Properties ◽  
Surface Treatment ◽  
Tensile Properties ◽  
Coefficient Of Thermal Expansion ◽  
Heat Treating ◽  
Temperature Performance ◽  
Operational Level

Abstract UNISPAN LR35 offers the lowest coefficient of thermal expansion of any alloy now available. It is a low residual modification of UNISPAN 36 for fully achieving the demanding operational level of precision equipment. This datasheet provides information on composition, physical properties, hardness, and tensile properties. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, machining, and surface treatment. Filing Code: Fe-46. Producer or source: Cyclops Corporation.

ALCAN B33S

Alloy Digest ◽  
1967 ◽  
Vol 16 (12) ◽  
Keyword(s):  
Corrosion Resistance ◽  
Aluminum Alloy ◽  
Physical Properties ◽  
Surface Treatment ◽  
Tensile Properties ◽  
Heat Treating ◽  
Corrosion Resistant ◽  
Aluminum Company

Abstract Alcan B33S is an aluminum alloy recommended for architectural shapes requiring hard, corrosion resistant, colored finishes. It contains enough magnesium to render it heat treatable. This datasheet provides information on composition, physical properties, elasticity, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: Al-170. Producer or source: Aluminum Company of Canada Ltd.

DURANICKEL ALLOY 301

Alloy Digest ◽  
1963 ◽  
Vol 12 (6) ◽  
Keyword(s):  
Fracture Toughness ◽  
Corrosion Resistance ◽  
High Temperature ◽  
Heat Resistance ◽  
Physical Properties ◽  
Surface Treatment ◽  
High Strength ◽  
Heat Treating ◽  
International Nickel Company ◽  
Temperature Performance

Abstract DURANICKEL Alloy 301 is a wrought, age-hardenable nickel alloy having high strength, high corrosion and heat resistance. It is recommended for springs, diaphrams, bearings, pump and valve parts. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness and fatigue. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: Ni-83. Producer or source: The International Nickel Company Inc..

Sign in / Sign up

Export Citation Format

Share Document