VANADIS 23

Alloy Digest ◽  
1997 ◽  
Vol 46 (3) ◽  
Keyword(s):  
Mechanical Properties ◽  
Compressive Strength ◽  
Tool Steel ◽  
Molten Steel ◽  
High Performance ◽  
Heat Treating ◽  
Bend Strength ◽  
High Compressive Strength ◽  
Carbide Particles

Abstract Vanadis 23 is a high-performance tool steel produced from superclean molten steel, which is then atomized to powder. The alloy is characterized by uniformly distributed carbide particles that help in its good mechanical properties, toughness, and bend strength. Vanadis 23 is recommended for mixed-wear (abrasive and adhesive) resistance and high compressive strength. This datasheet provides information on composition, and microstructure. It also includes information on heat treating, machining, and joining. Filing Code: TS-552. Producer or source: Uddeholm Corporation. See also Alloy Digest TS-561, October 1998.

SANDVIK APM 2730

Alloy Digest ◽  
2019 ◽  
Vol 68 (4) ◽  
Keyword(s):  
Wear Resistance ◽  
Compressive Strength ◽  
Physical Properties ◽  
Abrasive Wear ◽  
Tool Steel ◽  
High Speed ◽  
Heat Treating ◽  
Abrasive Wear Resistance ◽  
Steel Company ◽  
High Compressive Strength

Abstract Sandvik APM 2730 is a powder metallurgical alloyed hot-isostatic-pressed high-speed tool steel with abrasive wear resistance and high-compressive strength. This datasheet provides information on composition, physical properties, and elasticity. It also includes information on heat treating and machining. Filing Code: TS-763. Producer or source: Sandvik Steel Company.

VANADIS 4

Alloy Digest ◽  
1991 ◽  
Vol 40 (10) ◽  
Keyword(s):  
Fracture Toughness ◽  
Powder Metallurgy ◽  
Physical Properties ◽  
Tool Steel ◽  
High Performance ◽  
Cold Work ◽  
Heat Treating ◽  
Good Combination ◽  
Bend Strength ◽  
Cold Work Tool Steel

Abstract VANADIS 4 is a high performance cold work tool steel made by powder metallurgy. It offers an extremely good combination of resistance and toughness for high performance tools. This datasheet provides information on composition, physical properties, hardness, elasticity, and bend strength as well as fracture toughness. It also includes information on heat treating and machining. Filing Code: TS-506. Producer or source: Uddeholm Corporation.

SANDVIK APM 2723

Alloy Digest ◽  
2019 ◽  
Vol 68 (3) ◽  
Keyword(s):  
Wear Resistance ◽  
Compressive Strength ◽  
Physical Properties ◽  
Abrasive Wear ◽  
Tool Steel ◽  
High Speed ◽  
Heat Treating ◽  
Abrasive Wear Resistance ◽  
Steel Company ◽  
High Compressive Strength

Abstract Sandvik APM 2723 is a powder metallurgical alloyed hot-isostatic-pressed high-speed tool steel with abrasive wear resistance and high-compressive strength. This datasheet provides information on composition, physical properties, and elasticity. It also includes information on heat treating. Filing Code: TS-758. Producer or source: Sandvik Steel Company.

BOEHLER K390 MICROCLEAN

Alloy Digest ◽  
2004 ◽  
Vol 53 (10) ◽  
Keyword(s):  
Fracture Toughness ◽  
Wear Resistance ◽  
Compressive Strength ◽  
Physical Properties ◽  
Tool Steel ◽  
Cold Work ◽  
Heat Treating ◽  
Powder Metal ◽  
High Compressive Strength ◽  
Cold Work Tool Steel

Abstract Boehler K390 Microclean is a cold work tool steel with an extremely good wear resistance combined with good toughness and a high compressive strength. This alloy is of powder metallurgical origins and is very homogeneous. This datasheet provides information on composition, physical properties, microstructure, and hardness as well as fracture toughness. It also includes information on wear resistance as well as heat treating, machining, and powder metal forms. Filing Code: TS-607. Producer or source: Böhler Edelstahl GMBH, Böhler-Uddeholm N. America.

ULTRONZE

Alloy Digest ◽  
1981 ◽  
Vol 30 (5) ◽  
Keyword(s):  
Corrosion Resistance ◽  
Stress Relaxation ◽  
Physical Properties ◽  
Copper Alloy ◽  
High Performance ◽  
Copper Alloys ◽  
Heat Treating ◽  
Bend Strength ◽  
Excellent Corrosion Resistance ◽  
Relaxation Characteristics

Abstract ULTRONZE is a copper alloy also known as Olin Alloy 654. It bridges the gap between standard high-performance copper alloys and beryllium-copper alloys, thus enabling the design of parts with properties previously only attainable with more expensive materials. The alloy has superior stress-relaxation characteristics, good bend performance and excellent corrosion resistance. Among its typical uses are electrical connectors, fuse clips and relay springs. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and bend strength. It also includes information on corrosion resistance as well as forming, heat treating, and machining. Filing Code: Cu-417. Producer or source: Olin Brass.

BERYLCO 25S

Alloy Digest ◽  
1952 ◽  
Vol 1 (3) ◽  
Keyword(s):  
Mechanical Properties ◽  
High Performance ◽  
Precipitation Hardening ◽  
Elevated Temperatures ◽  
Heat Treating ◽  
Good Resistance ◽  
Subzero Temperatures ◽  
Endurance Strength ◽  
Wear And Corrosion ◽  
Resistance To Wear

Abstract Berylco 25S alloy is the high-performance beryllium-copper spring material of 2 percent nominal beryllium content. It responds to precipitation-hardening for maximum mechanical properties. It has high elastic and endurance strength, good electrical and thermal conductivity, excellent resistance to wear and corrosion, high corrosion-fatigue strength, good resistance to moderately elevated temperatures, and no embrittlement or loss of normal ductility at subzero temperatures. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: Cu-3. Producer or source: Beryllium Corporation.

COMPAX

Alloy Digest ◽  
1988 ◽  
Vol 37 (3) ◽  
Keyword(s):  
Wear Resistance ◽  
Compressive Strength ◽  
Physical Properties ◽  
Surface Treatment ◽  
Tool Steel ◽  
Dimensional Stability ◽  
Heat Treating ◽  
High Toughness ◽  
Steel Corporation

Abstract COMPAX is a chromium-molybdenum shock-resistant tool steel characterized by high toughness, good wear resistance, good through hardening and good dimensional stability during hardening. This datasheet provides information on composition, physical properties, hardness, elasticity, and compressive strength. It also includes information on heat treating, machining, joining, and surface treatment. Filing Code: TS-488. Producer or source: Uddeholm Steel Corporation.

SANDVIK 3R12HT

Alloy Digest ◽  
2002 ◽  
Vol 51 (4) ◽  
Keyword(s):  
Mechanical Properties ◽  
Corrosion Resistance ◽  
High Temperature ◽  
Physical Properties ◽  
Tensile Properties ◽  
Heat Treating ◽  
Bend Strength ◽  
Steel Company ◽  
Temperature Performance ◽  
Metallurgical Processing

Abstract Sandvik 3R12HT is an improved version of Type 304L for better mechanical properties at high temperatures. This is accomplished by improved metallurgical processing and a modified chemistry. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and bend strength as well as creep. It also includes information on high temperature performance and corrosion resistance as well as heat treating and joining. Filing Code: SS-850. Producer or source: Sandvik Steel Company.

GRAPH-AIR

Alloy Digest ◽  
1991 ◽  
Vol 40 (6) ◽  
Keyword(s):  
Fracture Toughness ◽  
Wear Resistance ◽  
Compressive Strength ◽  
Tensile Properties ◽  
Tool Steel ◽  
Heat Treating ◽  
Steel Company

Abstract GRAPH-AIR is an air hardening, non-deforming tool steel with outstanding wear resistance and toughness. it contain uniformly distributed graphic particles for good machinability and non-seizing characteristics. This datasheet provides information on composition, hardness, tensile properties, and compressive strength as well as fracture toughness. It also includes information on forming, heat treating, machining, and joining. Filing Code: TS-75. Producer or source: Latrobe Steel Company. Originally published October 1958, revised April 1984, June 1991.

AISI TYPE L6

Alloy Digest ◽  
1971 ◽  
Vol 20 (1) ◽  
Keyword(s):  
Wear Resistance ◽  
Compressive Strength ◽  
Tensile Properties ◽  
Tool Steel ◽  
Heat Treating ◽  
Steel Mills ◽  
Aisi Type ◽  
Machine Parts ◽  
High Degree

Abstract AISI Type L6 is recommended for tools, dies and machine parts which must develop a rather high degree of hardness, wear resistance and compressive strength combined with toughness. This datasheet provides information on composition, hardness, elasticity, and tensile properties. It also includes information on forming, heat treating, machining, and joining. Filing Code: TS-232. Producer or source: Tool steel mills.

Sign in / Sign up

Export Citation Format

Share Document