VANADIS 60

Alloy Digest ◽  
1998 ◽  
Vol 47 (12) ◽  
Keyword(s):  
Wear Resistance ◽  
Compressive Strength ◽  
High Temperature ◽  
Physical Properties ◽  
High Speed ◽  
Cold Work ◽  
High Speed Steel ◽  
Heat Treating ◽  
Temperature Performance

Abstract VANADIS 60 is a high-speed steel with an addition of cobalt. The alloy is particularly suitable for cold-work tooling where highest wear resistance and highest compressive strength are required at the same time. This datasheet provides information on composition, physical properties, and hardness. It also includes information on high temperature performance as well as forming and heat treating. Filing Code: TS-565. Producer or source: Uddeholm Tooling AB.

UNICUT 2

Alloy Digest ◽  
1982 ◽  
Vol 31 (11) ◽  
Keyword(s):  
Wear Resistance ◽  
High Temperature ◽  
Physical Properties ◽  
Surface Treatment ◽  
High Speed ◽  
High Speed Steel ◽  
Heat Treating ◽  
High Carbon ◽  
Temperature Performance

Abstract UNICUT 2 is a high-carbon, high-vanadium, molybdenum-type of high-speed steel. The high carbon and vanadium contents provide higher resistance to abrasion when compared with other standard high-speed steels; however, this is accomplished at a slight loss in machinability and grind-ability. In many cases, this is considered to be of minor consequence where better wear resistance is required. Typical applications include drills, reamers, milling cutters, broaches and wood-working tools. This datasheet provides information on composition, physical properties, and hardness. It also includes information on high temperature performance as well as forming, heat treating, machining, and surface treatment. Filing Code: TS-406. Producer or source: Cyclops Corporation.

CRUCIBLE REX M2

Alloy Digest ◽  
2020 ◽  
Vol 69 (10) ◽  
Keyword(s):  
Wear Resistance ◽  
High Temperature ◽  
Physical Properties ◽  
Tool Steel ◽  
High Speed ◽  
Cold Work ◽  
Cutting Tools ◽  
Heat Treating ◽  
General Purpose ◽  
Temperature Performance

Abstract Crucible Rex M2 is a general-purpose high-speed tool steel that contains tungsten, molybdenum, chromium, and vanadium as principal alloying elements. It is suitable for a wide variety of cutting tools that require moderate feeds and speeds. For cold work applications, Rex M2 offers higher hardness and wear resistance than Type D2 tool steel. This datasheet provides information on composition, physical properties, hardness, and elasticity. It also includes information on low and high temperature performance as well as forming, heat treating, machining, and surface treatment. Filing Code: TS-801. Producer or source: Crucible Industries LLC.

CIRCLE M

Alloy Digest ◽  
1953 ◽  
Vol 2 (9) ◽  
Keyword(s):  
Wear Resistance ◽  
Compressive Strength ◽  
Physical Properties ◽  
High Speed ◽  
High Speed Steel ◽  
Heat Treating ◽  
High Production ◽  
Red Hardness

Abstract CIRCLE M is a molybdenum-tungsten high-speed steel containing 9.0% cobalt. It is adapted to high production applications where increased speeds and heavy cuts necessitate unusual red-hardness and wear resistance. This datasheet provides information on composition, physical properties, elasticity, and compressive strength. It also includes information on forming, heat treating, and machining. Filing Code: TS-10. Producer or source: Firth Sterling Corporation.

AISI TYPE M2

Alloy Digest ◽  
1972 ◽  
Vol 21 (2) ◽  
Keyword(s):  
Fracture Toughness ◽  
Wear Resistance ◽  
Compressive Strength ◽  
Physical Properties ◽  
High Speed ◽  
High Speed Steel ◽  
Heat Treating ◽  
General Purpose ◽  
Steel Mills ◽  
Aisi Type

Abstract AISI TYPE M2 is a molybdenum-tungsten high-speed steel with a balanced analysis which produces properties applicable to all general-purpose high-speed uses. It has an excellent balance between toughness and wear resistance. This datasheet provides information on composition, physical properties, hardness, and compressive strength as well as fracture toughness. It also includes information on forming, heat treating, machining, and joining. Filing Code: TS-240. Producer or source: Tool steel mills.

CARPENTER T-K

Alloy Digest ◽  
1969 ◽  
Vol 18 (5) ◽  
Keyword(s):  
Wear Resistance ◽  
Compressive Strength ◽  
High Temperature ◽  
Physical Properties ◽  
Tensile Properties ◽  
Elevated Temperatures ◽  
Heat Treating ◽  
Extrusion Dies ◽  
Temperature Performance ◽  
Red Hardness

Abstract Carpenter T-K is a tungsten-chromium type hot-work steel having good red-hardness and resistance to abrasion. It will withstand high operating temperatures up to 1000 F for long periods. It is recommended for hot shear blades, forging and extrusion dies, hot compression tools, and similar applications where high compressive strength and wear resistance at elevated temperatures are required. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on high temperature performance as well as forming, heat treating, machining, and joining. Filing Code: TS-219. Producer or source: Carpenter.

CRUCIBLE CPM REX 121

Alloy Digest ◽  
2001 ◽  
Vol 50 (10) ◽  
Keyword(s):  
Fracture Toughness ◽  
Wear Resistance ◽  
High Temperature ◽  
High Speed ◽  
High Speed Steel ◽  
Heat Treating ◽  
Maximum Hardness ◽  
Temperature Performance ◽  
Red Hardness ◽  
Cutting Speeds

Abstract CPM Rex 121 is a super high-speed steel with significantly higher wear resistance and red hardness than other high-speed steels. It is best suited for applications requiring high cutting speeds. It may provide an alternative to carbide where carbide cutting edges are too fragile. The annealed hardness is approximately 350-400 HB, and maximum hardness is approximately 72 HRC. This datasheet provides information on composition, physical properties, microstructure, hardness, and elasticity as well as fracture toughness. It also includes information on high temperature performance and wear resistance as well as heat treating and surface treatment. Filing Code: TS-591. Producer or source: Crucible.

MAZEMAN

Alloy Digest ◽  
2001 ◽  
Vol 50 (8) ◽  
Keyword(s):  
Wear Resistance ◽  
High Temperature ◽  
Physical Properties ◽  
Cold Work ◽  
Heat Treating ◽  
Die Steel ◽  
Temperature Performance

Abstract Mazeman is a cold-work die steel with a combination of toughness, wear resistance, and hardenability. Applications include shear blades, punches and die inserts. This datasheet provides information on composition, physical properties, and hardness as well as creep. It also includes information on high temperature performance as well as heat treating and machining. Filing Code: TS-589. Producer or source: Timken Latrobe Steel.

WIELAND-UB6

Alloy Digest ◽  
2019 ◽  
Vol 68 (12) ◽  
Keyword(s):  
Wear Resistance ◽  
Compressive Strength ◽  
High Temperature ◽  
Physical Properties ◽  
High Hardness ◽  
Heat Treating ◽  
Corrosion And Wear ◽  
Aluminum Bronze ◽  
High Compressive Strength ◽  
Temperature Performance

Abstract Wieland-UB5 is complex aluminum bronze that has excellent machinability, high hardness, and high compressive strength. This datasheet provides information on composition, physical properties, hardness, elasticity, and compressive strength. It also includes information on high temperature performance, corrosion and wear resistance as well as forming, heat treating, and machining. Filing Code: Cu-888. Producer or source: Wieland Metals, Inc.. Originally published May 2019, corrected December 2019.

GUTERL S-7

Alloy Digest ◽  
1983 ◽  
Vol 32 (6) ◽  
Keyword(s):  
Wear Resistance ◽  
High Temperature ◽  
Physical Properties ◽  
Surface Treatment ◽  
Tensile Properties ◽  
Cold Work ◽  
Heat Treating ◽  
General Purpose ◽  
Temperature Performance ◽  
Shock Resistance

Abstract GUTERL S-7 is a chromium-molybdenum, general-purpose, air-hardening tool steel recommended for uses where shock resistance, good hot-work properties, good wear resistance, excellent toughness and easy machining are important. These properties make it suitable for many hot-work and cold-work applications. Among its many uses are blanking dies, shear blades, punches and chisels. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on high temperature performance as well as forming, heat treating, machining, and surface treatment. Filing Code: TS-414. Producer or source: Guterl Special Steel Corporation.

AISI TYPE M10

Alloy Digest ◽  
1977 ◽  
Vol 26 (7) ◽  
Keyword(s):  
High Temperature ◽  
Physical Properties ◽  
High Speed ◽  
Cutting Tools ◽  
High Speed Steel ◽  
Heat Treating ◽  
General Purpose ◽  
Steel Mills ◽  
Temperature Performance ◽  
Aisi Type

Abstract AISI Type M10 is the high vanadium type of molybdenum high-speed steel. It is a deep-hardening steel and offers high cutting ability and excellent finishing properties. It is a general-purpose steel for cutting tools and is used in such applications as taps, lathe tools and reamers. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on high temperature performance as well as forming, heat treating, machining, and surface treatment. Filing Code: TS-321. Producer or source: Tool steel mills.

Sign in / Sign up

Export Citation Format

Share Document