TLS D2

Alloy Digest ◽  
2008 ◽  
Vol 57 (2) ◽  
Keyword(s):  
Heat Treatment ◽  
Wear Resistance ◽  
Physical Properties ◽  
Tool Life ◽  
Tool Steel ◽  
Heat Treating ◽  
Size Change ◽  
Wear Resistant

Abstract TLS D2 is the most wear resistant of the commonly available grades of tool steel. It is deep hardening and has very low size change during heat treatment. However, because of its excellent wear resistance, it produces a low machinability rating. It is chosen when long tool life is required. This datasheet provides information on composition, physical properties, hardness, and elasticity. It also includes information on wear resistance as well as heat treating and machining. Filing Code: TS-660. Producer or source: Timken Latrobe Steel.

CYCLOPS SCK

Alloy Digest ◽  
1979 ◽  
Vol 28 (3) ◽  
Keyword(s):  
Heat Treatment ◽  
Wear Resistance ◽  
Physical Properties ◽  
Tool Steel ◽  
Cold Work ◽  
Heat Treating ◽  
Optimum Combination ◽  
Cold Work Tool Steel ◽  
Minimum Distortion

Abstract CYCLOPS SCK is a cold-work tool steel with a balanced composition to provide air hardening and an optimum combination of toughness, wear resistance and minimum distortion during heat treatment. Typical applications are shear blades, trimming dies and forming rolls, including grade rolls for cutlery and flatware. This datasheet provides information on composition, physical properties, hardness, and elasticity. It also includes information on forming, heat treating, and machining. Filing Code: TS-346. Producer or source: Cyclops Corporation.

HI-WEAR 64

Alloy Digest ◽  
1962 ◽  
Vol 11 (8) ◽  
Keyword(s):  
Heat Treatment ◽  
Wear Resistance ◽  
Low Temperature ◽  
Physical Properties ◽  
Tool Steel ◽  
Cold Work ◽  
Heat Treating ◽  
Temperature Heat ◽  
Cold Work Tool Steel ◽  
Temperature Heat Treatment

Abstract Hi-Wear 64 is a cold work tool steel offering improved wear resistance and low temperature heat treatment. It is a deep hardening non-deforming steel recommended for tools to blank and form abrasive materials. This datasheet provides information on composition, physical properties, and hardness. It also includes information on forming, heat treating, machining, and joining. Filing Code: TS-122. Producer or source: Carpenter.

14-4CrMo

Alloy Digest ◽  
2001 ◽  
Vol 50 (10) ◽  
Keyword(s):  
Wear Resistance ◽  
Corrosion Resistance ◽  
Physical Properties ◽  
Tool Steel ◽  
Heat Treating ◽  
Corrosion And Wear ◽  
Wear Resistant

Abstract 14-4CrMo is a martensitic stainless tool steel with better corrosion resistance than Type 440C. Molybdenum increases the corrosion resistance and produces wear-resistant carbides. The alloy is used for its wear resistance and edge retention. This datasheet provides information on composition, physical properties, hardness, and elasticity. It also includes information on corrosion and wear resistance as well as heat treating and machining. Filing Code: SS-832. Producer or source: Timken Latrobe Steel.

MICRO-MELT 420-CW

Alloy Digest ◽  
2009 ◽  
Vol 58 (1) ◽  
Keyword(s):  
Fracture Toughness ◽  
Wear Resistance ◽  
Corrosion Resistance ◽  
Physical Properties ◽  
Tool Steel ◽  
Heat Treating ◽  
Corrosion And Wear ◽  
Powder Metal ◽  
Wear Resistant

Abstract Micro-Melt 420-CW is a powder-produced wear-resistant tool steel with corrosion resistance. This datasheet provides information on composition, physical properties, hardness, and elasticity as well as fracture toughness. It also includes information on corrosion and wear resistance as well as forming, heat treating, machining, and powder metal forms. Filing Code: TS-676. Producer or source: Carpenter Powder Products.

CARPENTER MICRO-MELT SPEED-STAR FM HiC M-2 ALLOY

Alloy Digest ◽  
1991 ◽  
Vol 40 (8) ◽  
Keyword(s):  
Heat Treatment ◽  
Fracture Toughness ◽  
Wear Resistance ◽  
Compressive Strength ◽  
Powder Metallurgy ◽  
Physical Properties ◽  
Tool Steel ◽  
High Speed ◽  
Heat Treating ◽  
Uniform Structure

Abstract Carpenter Micro-Melt Speed-Star FM HiC M-2 alloy is a molybdenum tungsten high-speed tool steel produced by powder metallurgy techniques. It has a more uniform structure than conventionally produced high-speed steels. It has good response to heat treatment, grinds easily, possesses improved wear resistance and toughness. This datasheet provides information on composition, physical properties, hardness, and compressive strength as well as fracture toughness. It also includes information on heat treating. Filing Code: TS-504. Producer or source: Carpenter.

CARPENTER MICRO-MELT A11

Alloy Digest ◽  
2000 ◽  
Vol 49 (1) ◽  
Keyword(s):  
Heat Treatment ◽  
Fracture Toughness ◽  
Wear Resistance ◽  
Physical Properties ◽  
Tensile Properties ◽  
Tool Steel ◽  
Heat Treating ◽  
Powder Metal

Abstract Carpenter Micro-Melt A11 is an A11 steel developed by the powder metal process. The tool steel possesses advantages in quenching, response to heat treatment, wear resistance, and toughness. Applications to be considered are punches and dies for blanking and piercing. See revised version, Alloy Digest TS-587, May 2001. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness. It also includes information on wear resistance as well as heat treating and machining. Filing Code: TS-571. Producer or source: Carpenter.

UNS T12001

Alloy Digest ◽  
1989 ◽  
Vol 38 (1) ◽  
Keyword(s):  
Heat Treatment ◽  
Physical Properties ◽  
Tool Steel ◽  
High Speed ◽  
High Speed Steel ◽  
Heat Treating ◽  
General Purpose ◽  
Steel Mills

Abstract UNS T12001 is a general-purpose, tungsten, high-speed steel containing nominally 18% tungsten, 4% chromium and 1% vanadium. It is suitable for practically all high-speed applications. This steel has been the standard of the industry for many years because of its cutting ability, ease of heat treatment and minimum tendency to decarburize. This datasheet provides information on composition, physical properties, hardness, and elasticity. It also includes information on forming, heat treating, and machining. Filing Code: TS-495. Producer or source: Tool steel mills.

COMPAX

Alloy Digest ◽  
1988 ◽  
Vol 37 (3) ◽  
Keyword(s):  
Wear Resistance ◽  
Compressive Strength ◽  
Physical Properties ◽  
Surface Treatment ◽  
Tool Steel ◽  
Dimensional Stability ◽  
Heat Treating ◽  
High Toughness ◽  
Steel Corporation

Abstract COMPAX is a chromium-molybdenum shock-resistant tool steel characterized by high toughness, good wear resistance, good through hardening and good dimensional stability during hardening. This datasheet provides information on composition, physical properties, hardness, elasticity, and compressive strength. It also includes information on heat treating, machining, joining, and surface treatment. Filing Code: TS-488. Producer or source: Uddeholm Steel Corporation.

AIR-4

Alloy Digest ◽  
1963 ◽  
Vol 12 (2) ◽  
Keyword(s):  
Wear Resistance ◽  
Physical Properties ◽  
Tool Steel ◽  
Heat Treating ◽  
High Wear Resistance ◽  
Bethlehem Steel Corporation ◽  
Steel Corporation ◽  
Machining Characteristics

Abstract BETHLEHEM AIR-4 is a medium alloy air-hardening tool steel having low deformation, high wear resistance and hardness, deep hardening properties and adequate toughness for severe service. It has excellent free-machining characteristics. This datasheet provides information on composition, physical properties, hardness, and elasticity. It also includes information on forming, heat treating, machining, and joining. Filing Code: TS-129. Producer or source: Bethlehem Steel Corporation.

COLUMBIA S6

Alloy Digest ◽  
1985 ◽  
Vol 34 (8) ◽  
Keyword(s):  
Wear Resistance ◽  
Physical Properties ◽  
Tool Steel ◽  
Heat Treating ◽  
Steel Company ◽  
High Hardenability ◽  
Heat Treated ◽  
Strength And Toughness

Abstract COLUMBIA S6 is a silicon-manganese shock-resisting tool steel with fairly high hardenability. It offers superior toughness and wear resistance when compared to conventional shock-resisting steels heat treated to Rockwell C 54 to 56. For optimum strength and toughness, parts should be tempered within the range 400 to 600 F. Among its many applications are shear blades, punches, hand chisels and pneumatic tools. This datasheet provides information on composition, physical properties, hardness, and elasticity. It also includes information on forming, heat treating, and machining. Filing Code: TS-445. Producer or source: Columbia Tool Steel Company.

Sign in / Sign up

Export Citation Format

Share Document