CRYODUR 2379

Alloy Digest ◽  
2018 ◽  
Vol 67 (7) ◽  
Keyword(s):  
Wear Resistance ◽  
High Temperature ◽  
Physical Properties ◽  
Tool Steel ◽  
Heat Treating ◽  
Temperature Performance

Abstract Cryodur 2379 is a tool steel developed for wear resistance. This datasheet provides information on composition, physical properties, and hardness. It also includes information on high temperature performance and wear resistance as well as heat treating and joining. Filing Code: TS-750. Producer or source: Deutsche Edelstahlwerke.

CARPENTER MICRO-MELT A11-LVC

Alloy Digest ◽  
2000 ◽  
Vol 49 (3) ◽  
Keyword(s):  
Fracture Toughness ◽  
Wear Resistance ◽  
High Temperature ◽  
Physical Properties ◽  
Tensile Properties ◽  
Tool Steel ◽  
Heat Treating ◽  
Temperature Performance

Abstract Micro-Melt A11-LVC is a high-vanadium tool steel produced by the Carpenter Micro-Melt powder process. It provides higher toughness than Carpenter Micro-Melt A11 (Alloy Digest TS-571, January 2000) with lower wear resistance. It is used where slightly less wear resistance than that of Micro-Melt A11 is acceptable. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness. It also includes information on high temperature performance and wear resistance as well as heat treating and machining. Filing Code: TS-573. Producer or source: Carpenter.

POTOMAC 2V

Alloy Digest ◽  
1974 ◽  
Vol 23 (12) ◽  
Keyword(s):  
Fracture Toughness ◽  
Wear Resistance ◽  
High Temperature ◽  
Physical Properties ◽  
Surface Treatment ◽  
Tool Steel ◽  
Heat Treating ◽  
High Carbon ◽  
Temperature Performance ◽  
Hot Work Tool Steel

Abstract POTOMAC 2V is a high-carbon, high-vanadium modification of the well-known 5% chromium hot-work tool steel. It has improved wear resistance and the necessary toughness for severe forming applications. It is recommended for such applications as hot dies for extrusions and forgings, piercing points and hot punches. This datasheet provides information on composition, physical properties, and hardness as well as fracture toughness. It also includes information on high temperature performance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: TS-280. Producer or source: Allegheny Ludlum Corporation.

THERMOLD H13

Alloy Digest ◽  
1972 ◽  
Vol 21 (3) ◽  
Keyword(s):  
Fracture Toughness ◽  
Wear Resistance ◽  
High Temperature ◽  
Elevated Temperature ◽  
Physical Properties ◽  
Tensile Properties ◽  
Tool Steel ◽  
Heat Treating ◽  
Temperature Performance ◽  
Hot Hardness

Abstract THERMOLD H13 (formerly Thermold AV) is an air-hardening hot-work tool steel having good wear resistance and hot hardness at elevated temperature. Uniforged Rounds of THERMOLD H13 were developed especially for critically stressed extrusion tools and other hot-work tooling applications. This datasheet provides information on composition, physical properties, hardness, and tensile properties as well as fracture toughness. It also includes information on high temperature performance as well as forming, heat treating, machining, and joining. Filing Code: TS-241. Producer or source: Cyclops Corporation.

SLEIPNER

Alloy Digest ◽  
2015 ◽  
Vol 64 (1) ◽  
Keyword(s):  
Wear Resistance ◽  
High Temperature ◽  
North America ◽  
Physical Properties ◽  
Tool Steel ◽  
Heat Treating ◽  
Temperature Performance ◽  
Versatile Tool ◽  
Property Profile ◽  
Cr Steels

Abstract Sleipner is an 8% Cr-steel. Its property profile has been carefully balanced, producing a versatile tool steel that overcomes the limitations of the 12% Cr-steels. This datasheet provides information on composition, physical properties, and elasticity. It also includes information on high temperature performance and wear resistance as well as forming, heat treating, machining, and joining. Filing Code: TS-728. Producer or source: Böhler-Uddeholm North America.

MICRO-MELT M62

Alloy Digest ◽  
2006 ◽  
Vol 55 (1) ◽  
Keyword(s):  
Wear Resistance ◽  
High Temperature ◽  
Physical Properties ◽  
Tool Steel ◽  
Heat Treating ◽  
Powder Metal ◽  
Temperature Performance ◽  
Aisi Type

Abstract Micro-Melt M62 tool steel is produced by the Carpenter Micro-Melt powder metal process and is superior in toughness to conventional AISI Type M42 at similar hardness levels. This datasheet provides information on composition, physical properties, hardness, and elasticity. It also includes information on high temperature performance and wear resistance as well as forming, heat treating, and powder metal forms. Filing Code: TS-626. Producer or source: Carpenter Specialty Alloys.

DURATECH M48

Alloy Digest ◽  
2006 ◽  
Vol 55 (4) ◽  
Keyword(s):  
Wear Resistance ◽  
High Temperature ◽  
Physical Properties ◽  
Tool Steel ◽  
Cobalt Content ◽  
Heat Treating ◽  
Temperature Performance ◽  
Vanadium Carbides ◽  
Hot Hardness

Abstract DuraTech M48 is a superhigh-speed tool steel. The high cobalt content provides hot hardness while vanadium carbides provide wear resistance. The alloy is superior to both T15 and M42 in these categories. This datasheet provides information on composition, physical properties, hardness, and elasticity. It also includes information on high temperature performance and wear resistance as well as heat treating and machining. Filing Code: TS-630. Producer or source: Timken Latrobe Steel.

TLP A11

Alloy Digest ◽  
2001 ◽  
Vol 50 (3) ◽  
Keyword(s):  
Fracture Toughness ◽  
Wear Resistance ◽  
High Temperature ◽  
Impact Toughness ◽  
Physical Properties ◽  
Tool Steel ◽  
Heat Treating ◽  
High Impact ◽  
High Wear Resistance ◽  
Temperature Performance

Abstract Timken Latrobe Steel TLP A11 is a powder metallurgically produced A11 type of tool steel that is air hardening. It provides high wear resistance and a relatively high impact toughness. This datasheet provides information on composition, physical properties, hardness, and elasticity as well as fracture toughness. It also includes information on high temperature performance and wear resistance as well as heat treating and machining. Filing Code: TS-584. Producer or source: Timken Latrobe Steel.

CRUCIBLE REX M2

Alloy Digest ◽  
2020 ◽  
Vol 69 (10) ◽  
Keyword(s):  
Wear Resistance ◽  
High Temperature ◽  
Physical Properties ◽  
Tool Steel ◽  
High Speed ◽  
Cold Work ◽  
Cutting Tools ◽  
Heat Treating ◽  
General Purpose ◽  
Temperature Performance

Abstract Crucible Rex M2 is a general-purpose high-speed tool steel that contains tungsten, molybdenum, chromium, and vanadium as principal alloying elements. It is suitable for a wide variety of cutting tools that require moderate feeds and speeds. For cold work applications, Rex M2 offers higher hardness and wear resistance than Type D2 tool steel. This datasheet provides information on composition, physical properties, hardness, and elasticity. It also includes information on low and high temperature performance as well as forming, heat treating, machining, and surface treatment. Filing Code: TS-801. Producer or source: Crucible Industries LLC.

DYNAMAX

Alloy Digest ◽  
2006 ◽  
Vol 55 (2) ◽  
Keyword(s):  
Fracture Toughness ◽  
Wear Resistance ◽  
High Temperature ◽  
Physical Properties ◽  
Tool Steel ◽  
Heat Treating ◽  
Temperature Performance ◽  
Aerospace Alloys ◽  
Hot Hardness

Abstract Dynamax is a superhigh-speed tool steel with cobalt, designed for high hot hardness. It is used to machine the toughest aerospace alloys. This datasheet provides information on composition, physical properties, hardness, and elasticity as well as fracture toughness. It also includes information on high temperature performance and wear resistance as well as heat treating and machining. Filing Code: TS-628. Producer or source: Timken Latrobe Steel.

REYNOLDS 390 and A390

Alloy Digest ◽  
1971 ◽  
Vol 20 (8) ◽  
Keyword(s):  
Mechanical Properties ◽  
Wear Resistance ◽  
Corrosion Resistance ◽  
High Temperature ◽  
Physical Properties ◽  
High Hardness ◽  
Heat Treating ◽  
Silicon Alloys ◽  
Aluminum Silicon Alloys ◽  
Temperature Performance

Abstract REYNOLDS 390 and A390 are hypereutectic aluminum-silicon alloys having excellent wear resistance coupled with good mechanical properties, high hardness, and low coefficients of expansion. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fatigue. It also includes information on high temperature performance and corrosion resistance as well as casting, heat treating, and machining. Filing Code: Al-203. Producer or source: Reynolds Metals Company.

Sign in / Sign up

Export Citation Format

Share Document