YSS YXM4

Alloy Digest ◽  
2019 ◽  
Vol 68 (11) ◽  
Keyword(s):  
High Pressure ◽  
High Temperature ◽  
Physical Properties ◽  
Tool Steel ◽  
High Speed ◽  
Temperature Performance

Abstract YSS YXM4 is a cobalt-alloyed molybdenum high-speed tool steel with resistance to abrasion, seizure, and deformation under high pressure. This datasheet provides information on composition, physical properties, and hardness. It also includes information on high temperature performance. Filing Code: TS-780. Producer or source: Hitachi Metals America, Ltd.

DRM3

Alloy Digest ◽  
2005 ◽  
Vol 54 (9) ◽  
Keyword(s):  
High Temperature ◽  
Physical Properties ◽  
Tool Steel ◽  
High Speed ◽  
High Hardness ◽  
Heat Treating ◽  
Temperature Performance

Abstract Daido DRM3 is a high-speed tool steel with both high hardness (66 HRC maximum) and toughness for improved life in dies. The alloy has excellent hardenability. This datasheet provides information on composition, physical properties, hardness, and elasticity as well as fatigue. It also includes information on high temperature performance as well as heat treating. Filing Code: TS-619. Producer or source: International Mold Steel Inc., Daido Steel.

DRM2

Alloy Digest ◽  
2005 ◽  
Vol 54 (8) ◽  
Keyword(s):  
High Temperature ◽  
Physical Properties ◽  
Tool Steel ◽  
High Speed ◽  
High Hardness ◽  
Heat Treating ◽  
Cold Forging ◽  
Matrix Type ◽  
Temperature Performance

Abstract Daido DRM2 is a high-speed tool steel with both high hardness (62 HRC maximum) and toughness for improved life in dies. The alloy is a matrix type for warm and cold forging tools. This datasheet provides information on composition, physical properties, hardness, and elasticity as well as fatigue. It also includes information on high temperature performance as well as heat treating. Filing Code: TS-618. Producer or source: International Mold Steel Inc., Daido Steel.

DRM1

Alloy Digest ◽  
2005 ◽  
Vol 54 (7) ◽  
Keyword(s):  
High Temperature ◽  
Physical Properties ◽  
Tool Steel ◽  
High Speed ◽  
High Hardness ◽  
Heat Treating ◽  
Temperature Performance

Abstract Daido DRM1 is a high-speed tool steel with both high hardness (58 HRC maximum) and toughness for improved life in dies. This datasheet provides information on composition, physical properties, hardness, and elasticity as well as fatigue. It also includes information on high temperature performance as well as heat treating. Filing Code: TS-617. Producer or source: International Mold Steel Inc., Daido Steel.

CRUCIBLE REX M2

Alloy Digest ◽  
2020 ◽  
Vol 69 (10) ◽  
Keyword(s):  
Wear Resistance ◽  
High Temperature ◽  
Physical Properties ◽  
Tool Steel ◽  
High Speed ◽  
Cold Work ◽  
Cutting Tools ◽  
Heat Treating ◽  
General Purpose ◽  
Temperature Performance

Abstract Crucible Rex M2 is a general-purpose high-speed tool steel that contains tungsten, molybdenum, chromium, and vanadium as principal alloying elements. It is suitable for a wide variety of cutting tools that require moderate feeds and speeds. For cold work applications, Rex M2 offers higher hardness and wear resistance than Type D2 tool steel. This datasheet provides information on composition, physical properties, hardness, and elasticity. It also includes information on low and high temperature performance as well as forming, heat treating, machining, and surface treatment. Filing Code: TS-801. Producer or source: Crucible Industries LLC.

ALX ALLOY

Alloy Digest ◽  
1963 ◽  
Vol 12 (1) ◽  
Keyword(s):  
Heat Treatment ◽  
Corrosion Resistance ◽  
High Temperature ◽  
Physical Properties ◽  
Tensile Properties ◽  
High Speed ◽  
Heat Treating ◽  
Temperature Performance ◽  
Cobalt Base

Abstract ALX is a composition of nonferrous materials with a cobalt base containing chromium, tungsten and carbon. This alloy is commonly supplied in the cast-to-shape form, having an as-cast hardness of Rockwell C60-62 and requiring no further heat treatment. ALX is also supplied as cast tool bit material and is useful where conventional high-speed steels or carbides do not function effectively. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on high temperature performance and corrosion resistance as well as casting, forming, heat treating, and machining. Filing Code: Co-35. Producer or source: Allegheny Ludlum Corporation.

UDDEHOLM QRO 80 MICRODIZED

Alloy Digest ◽  
1987 ◽  
Vol 36 (12) ◽  
Keyword(s):  
Fracture Toughness ◽  
High Temperature ◽  
Elevated Temperature ◽  
Physical Properties ◽  
Tensile Properties ◽  
Tool Steel ◽  
Die Casting ◽  
Heat Treating ◽  
Temperature Performance ◽  
Improved Performance

Abstract UHB QRO 80 MICRODIZED is a chromium-molybdenum-vanadium tool steel with improved performance for tooling used at elevated temperature as in forging, extrusion and die casting. It is electro-slag refined. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness. It also includes information on high temperature performance as well as forming, heat treating, machining, and joining. Filing Code: TS-486. Producer or source: Uddeholm Aktiebolag.

CANNON-MUSKEGON D-2

Alloy Digest ◽  
1973 ◽  
Vol 22 (7) ◽  
Keyword(s):  
High Temperature ◽  
Physical Properties ◽  
Tool Steel ◽  
Silicon Content ◽  
Cast Steel ◽  
Heat Treating ◽  
High Carbon ◽  
High Chromium ◽  
Temperature Performance ◽  
Aisi D2

Abstract CANNON-MUSKEGON D-2 is a high-carbon high-chromium air-hardening cast tool steel with excellent resistance to abrasion. It is moderately machinable with excellent non-deforming characteristics. A higher silicon content is permissible in this cast steel than in AISI D2 (wrought) tool steel. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on high temperature performance as well as casting, heat treating, machining, and joining. Filing Code: TS-259. Producer or source: Cannon-Muskegon Corporation.

CARPENTER No. 882

Alloy Digest ◽  
1978 ◽  
Vol 27 (10) ◽  
Keyword(s):  
Fracture Toughness ◽  
High Temperature ◽  
Physical Properties ◽  
Tensile Properties ◽  
Tool Steel ◽  
Cold Work ◽  
Heat Treating ◽  
Temperature Performance ◽  
Hot Work Tool Steel ◽  
Red Hardness

Abstract CARPENTER No. 882 is a 5% chromium hot-work tool steel designed particularly for applications requiring extreme toughness combined with good red hardness. It also has found cold-work applications. It can be used at strength levels in excess of 260,000 psi (18,300 kg/cm2). This datasheet provides information on composition, physical properties, elasticity, and tensile properties as well as fracture toughness. It also includes information on high temperature performance as well as forming, heat treating, machining, and joining. Filing Code: TS-339. Producer or source: Carpenter.

CYCLOPS M4

Alloy Digest ◽  
1978 ◽  
Vol 27 (7) ◽  
Keyword(s):  
High Temperature ◽  
Physical Properties ◽  
Abrasion Resistance ◽  
High Speed ◽  
Heat Treating ◽  
Heavy Duty ◽  
Maximum Hardness ◽  
Temperature Performance ◽  
Sharp Edges ◽  
Normal Carbon

Abstract CYCLOPS M4 is a deep-hardening steel that was developed to utilize the excellent abrasion resistance that results from higher-than-normal carbon and vanadium contents in the molybdenum-tungsten family of high-speed steels. It is recommended for heavy-duty cutting operations and for sharp edges for fine cuts. Cyclops M4 should always be used at or near maximum hardness. This datasheet provides information on composition, physical properties, hardness, and elasticity. It also includes information on high temperature performance as well as forming, heat treating, machining, and joining. Filing Code: TS-335. Producer or source: Cyclops Corporation.

MÄRKER DCM/DCM-ESU

Alloy Digest ◽  
2009 ◽  
Vol 58 (7) ◽  
Keyword(s):  
High Temperature ◽  
Physical Properties ◽  
Tool Steel ◽  
Heat Treating ◽  
Hot Working ◽  
Hot Strength ◽  
Temperature Performance

Abstract Märker DCM is a hot-working tool steel with good hot toughness and good hot strength. This datasheet provides information on composition, physical properties, and elasticity as well as creep. It also includes information on high temperature performance as well as heat treating. Filing Code: TS-681. Producer or source: Schmidt & Clemens Inc.

Sign in / Sign up

Export Citation Format

Share Document