CARTECH MICRO-MELT 440-XH

Alloy Digest ◽  
2021 ◽  
Vol 70 (10) ◽  
Keyword(s):  
Stainless Steel ◽  
Corrosion Resistance ◽  
Tool Steel ◽  
Martensitic Stainless Steel ◽  
High Hardness ◽  
Heat Treating ◽  
Corrosion Resistant ◽  
Alloy Tool ◽  
Corrosion Resistant Alloy ◽  
Carpenter Technology Corporation

Abstract CarTech Micro-Melt 440-XH is an air-hardening, high-carbon, high chromium, corrosion resistant alloy tool steel that is produced by the powder metallurgy process. It can be considered as either a high hardness Type 440C martensitic stainless steel or a corrosion- resistant Type D2 alloy tool steel. CarTech Micro-Melt 440-XH possesses corrosion resistance equivalent to that of Type 440C martensitic stainless steel and can attain a maximum hardness of 64 HRC. In addition, the composition of CarTech Micro-Melt 440-XH has been balanced so that it can attain a minimum hardness of 60 HRC when air cooled from the hardening temperature. This datasheet provides information on composition, physical properties, hardness, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, and machining. Filing Code: TS-819. Producer or source: Carpenter Technology Corporation.

CARPENTER 440-XH

Alloy Digest ◽  
2002 ◽  
Vol 51 (5) ◽  
Keyword(s):  
Stainless Steel ◽  
Compressive Strength ◽  
Corrosion Resistance ◽  
Physical Properties ◽  
High Hardness ◽  
Heat Treating ◽  
Corrosion Resistant ◽  
Technology Corporation ◽  
Carpenter Technology Corporation ◽  
Chromium Stainless Steel

Abstract Carpenter 440-XH is an air-hardening corrosion-resistant chromium stainless steel with the high hardness of a D2 tool steel. Applications include cutlery and various dies for forming, drawing, and extruding. This datasheet provides information on composition, physical properties, hardness, tensile properties, and compressive strength. It also includes information on corrosion resistance as well as heat treating and machining. Filing Code: SS-750. Producer or source: Carpenter Technology Corporation. Originally published July 1999, corrected May 2002.

CARPENTER 825 PLUS

Alloy Digest ◽  
2006 ◽  
Vol 55 (3) ◽  
Keyword(s):  
Corrosion Resistance ◽  
High Temperature ◽  
Physical Properties ◽  
Heat Treating ◽  
Gas Well ◽  
Corrosion Resistant ◽  
Temperature Performance ◽  
Technology Corporation ◽  
Corrosion Resistant Alloy ◽  
Carpenter Technology Corporation

Abstract Carpenter 825 Plus is a corrosion-resistant alloy often used in downhole or surface gas well components. The alloy is age hardenable. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: Ni-632. Producer or source: Carpenter Technology Corporation.

FORMADUR 2085

Alloy Digest ◽  
2012 ◽  
Vol 61 (10) ◽  
Keyword(s):  
Stainless Steel ◽  
Corrosion Resistance ◽  
Physical Properties ◽  
Tensile Properties ◽  
Martensitic Stainless Steel ◽  
Heat Treating ◽  
Corrosion Resistant

Abstract Formadur 2085 is a free-machining and corrosion-resistant martensitic stainless steel. This datasheet provides information on composition, physical properties, hardness, and tensile properties. It also includes information on corrosion resistance as well as heat treating and joining. Filing Code: SS-1128. Producer or source: Schmolz + Bickenbach.

UGINOX MA3M

Alloy Digest ◽  
2008 ◽  
Vol 57 (9) ◽  
Keyword(s):  
Stainless Steel ◽  
Corrosion Resistance ◽  
Physical Properties ◽  
Tensile Properties ◽  
Martensitic Stainless Steel ◽  
High Hardness ◽  
Heat Treating ◽  
Food Preparation ◽  
Sharp Edge

Abstract Uginox MA3M (X38CrMo14, No. 1.4419) is an age-hardenable martensitic stainless steel, mostly used where a sharp edge for cutting is needed. The molybdenum-containing MA3M and Ma5MV grades can be used for kitchen knife and other food preparation blades due to their corrosion resistance and the possibility of achieving high hardness levels in the quenched and tempered condition. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, and joining. Filing Code: SS-1017. Producer or source: Arcelor Stainless Processing LLC.

ILLIUM-PD

Alloy Digest ◽  
1966 ◽  
Vol 15 (5) ◽  
Keyword(s):  
Stainless Steel ◽  
Corrosion Resistance ◽  
Food Processing ◽  
Steel Casting ◽  
Copper Content ◽  
High Strength ◽  
Heat Treating ◽  
Casting Alloy ◽  
Corrosion Resistant ◽  
Corrosion Resistant Alloy

Abstract Illium-PD is an austenitic-ferritic stainless steel casting alloy developed to meet the commercial need for a hardenable, high strength, corrosion resistant alloy free of copper content. It is recommended for equipment for the food processing, chemical, pharmaceutical and platic industry equipment. This datasheet provides information on composition, hardness, and tensile properties. It also includes information on corrosion resistance as well as casting, heat treating, machining, joining, and surface treatment. Filing Code: SS-181. Producer or source: Stainless Foundry & Engineering Inc..

CARTECH 420

Alloy Digest ◽  
2020 ◽  
Vol 69 (7) ◽  
Keyword(s):  
Stainless Steel ◽  
Wear Resistance ◽  
Corrosion Resistance ◽  
High Temperature ◽  
Physical Properties ◽  
Martensitic Stainless Steel ◽  
Heat Treating ◽  
Temperature Performance ◽  
Technology Corporation ◽  
Carpenter Technology Corporation

Abstract CarTech 420 is a hardenable, 13% chromium, martensitic stainless steel with higher strength and hardness, and better wear resistance than Type 410 stainless steel. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: SS-1321. Producer or source: Carpenter Technology Corporation.

CARPENTER CRB-7

Alloy Digest ◽  
1979 ◽  
Vol 28 (11) ◽  
Keyword(s):  
Stainless Steel ◽  
Corrosion Resistance ◽  
High Temperature ◽  
Physical Properties ◽  
Surface Treatment ◽  
Elevated Temperatures ◽  
High Hardness ◽  
Heat Treating ◽  
Corrosion Resistant ◽  
Temperature Performance

Abstract CARPENTER CRB-7 is a corrosion-resistant, wear-resistant and secondary-hardening steel for high-temperature bearings. It has high quenched-and-tempered hardness and maintains high hardness at elevated temperatures. CRB-7 is a martensitic type of stainless steel. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: SS-370. Producer or source: Carpenter.

UGINOX MA5MV

Alloy Digest ◽  
2009 ◽  
Vol 58 (3) ◽  
Keyword(s):  
Stainless Steel ◽  
Corrosion Resistance ◽  
Physical Properties ◽  
Tensile Properties ◽  
Martensitic Stainless Steel ◽  
High Hardness ◽  
Heat Treating ◽  
Food Preparation ◽  
Sharp Edge

Abstract Uginox MA5MV (X50CrMoV15, No. 1.4116) is an age-hardenable martensitic stainless steel, mostly used where a sharp edge for cutting is needed. The molybdenum-containing MA3M (Alloy Digest SS-1017, September 2008) and Ma5MV grades can be used for kitchen knife and other food preparation blades due to their corrosion resistance and the possibility of achieving high hardness levels in the quenched and tempered condition. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, and joining. Filing Code: SS-1031. Producer or source: Arcelor Stainless Processing LLC.

SANICRO 41

Alloy Digest ◽  
1995 ◽  
Vol 44 (1) ◽  
Keyword(s):  
Corrosion Resistance ◽  
Physical Properties ◽  
Oil And Gas ◽  
High Strength ◽  
Heat Treating ◽  
Gas Production ◽  
Oil And Gas Production ◽  
Corrosion Resistant ◽  
Corrosion Resistant Alloy ◽  
Nickel Base

Abstract SANDVIK SANICRO 41 is a nickel-base corrosion resistant alloy with a composition balanced to resist both oxidizing and reducing environments. A high-strength version (110) is available for oil and gas production. This datasheet provides information on composition, physical properties, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, and joining. Filing Code: Ni-475. Producer or source: Sandvik.

INCO-WELD 725NDUR

Alloy Digest ◽  
1998 ◽  
Vol 47 (4) ◽  
Keyword(s):  
Fracture Toughness ◽  
Corrosion Resistance ◽  
Tensile Properties ◽  
Filler Metal ◽  
Heat Treating ◽  
Oil Exploration ◽  
Corrosion Resistant ◽  
Resistant Alloy ◽  
Corrosion Resistant Alloy

Abstract Inco-Weld 725NDUR filler metal is a corrosion-resistant alloy similar to Inconel Filler Metal 625 (see Alloy Digest Ni-327, December 1985) but with higher strength and hardness. Applications include the oil exploration down-hole equipment market. This datasheet provides information on composition, hardness, and tensile properties as well as fracture toughness. It also includes information on corrosion resistance as well as heat treating and joining. Filing Code: Ni-540. Producer or source: Inco Alloys International Inc.

Sign in / Sign up

Export Citation Format

Share Document