scholarly journals FORMATION HYDRAULIC FRACTURING FLUID BASED ON CARBOXYMETHYL CELLULOSE: ITS ADVANTAGES AND LIMITATIONS, APPLICATION PROSPECTS

2016 ◽  
pp. 49-57
Author(s):  
V. R. Kalinin
Keyword(s):  
Hydraulic Fracturing ◽  
Carboxymethyl Cellulose ◽  
Low Cost ◽  
Low Permeability ◽  
Laboratory Studies ◽  
Fracturing Fluid ◽  
Fracturing Fluids ◽  
Low Permeability Reservoirs ◽  
Manufacturing Features ◽  
Hydraulic Fracturing Fluid

The article considers the advantages and limitations of hydraulic fracturing fluid based on carboxymethyl cellulose determined as a result of laboratory studies. As a result of testing the studied fluid manufacturing features compared with similar fracturing fluids it was determined that the fluid of interest can be effectively used as a fluid for formation hydraulic fracturing especially in low permeability reservoirs. This fluid is widely available and has a low cost. It can easily replace the foreign analogues.

Leak-Off Coefficient Analysis in Stimulation Treatment Design

2014 ◽  
Vol 933 ◽  
pp. 202-205
Author(s):  
Bo Cai ◽  
Yun Hong Ding ◽  
Yong Jun Lu ◽  
Chun Ming He ◽  
Gui Fu Duan
Keyword(s):  
Hydraulic Fracturing ◽  
Field Method ◽  
Oil Field ◽  
Low Permeability ◽  
Analysis Model ◽  
Fracturing Fluid ◽  
Real Time Analysis ◽  
Fracturing Fluids ◽  
Common Technique ◽  
Treatment Design

Hydraulic fracturing was first used in the late 1940s and has become a common technique to enhance the production of low-permeability formations.Hydraulic fracturing treatments were pumped into permeable formations with permeable fluids. This means that as the fracturing fluid was being pumped into the formation, a certain proportion of this fluid will being lost into formation as fluid leak-off. Therefore, leak-off coefficient is the most leading parameters of fracturing fluids. The accurate understanding of leak-off coefficient of fracturing fluid is an important guidance to hydraulic fracturing industry design. In this paper, a new field method of leak-off coefficient real time analysis model was presented based on instantaneous shut-in pressure (ISIP). More than 100 wells were fractured using this method in oil field. The results show that average liquid rates of post-fracturing was 22m3/d which double improvement compared with the past treatment wells. It had an important role for hydraulic fracturing stimulation treatment design in low permeability reservoirs and was proven that the new model for hydraulic fracturing treatment is greatly improved.

In vitro cytotoxicity assessment of a hydraulic fracturing fluid

2015 ◽  
Vol 12 (3) ◽  
pp. 286 ◽  
Author(s):  
Madeleine E. Payne ◽  
Heather F. Chapman ◽  
Janet Cumming ◽  
Frederic D. L. Leusch
Keyword(s):  
Coal Seam ◽  
Hydraulic Fracturing ◽  
Human Health ◽  
Produced Water ◽  
Coal Seam Gas ◽  
Fracturing Fluid ◽  
Human Health Risks ◽  
Fracturing Fluids ◽  
Hydraulic Fracturing Fluid

Environmental context Hydraulic fracturing fluids, used in large volumes by the coal seam gas mining industry, are potentially present in the environment either in underground formations or in mine wastewater (produced water). Previous studies of the human health and environmental effects of this practice have been limited because they use only desktop methods and have not considered combined mixture toxicity. We use a novel in vitro method for toxicity assessment, and describe the toxicity of a hydraulic fracturing fluid on a human gastrointestinal cell line. Abstract Hydraulic fracturing fluids are chemical mixtures used to enhance oil and gas extraction. There are concerns that fracturing fluids are hazardous and that their release into the environment – by direct injection to coal and shale formations or as residue in produced water – may have effects on ecosystems, water quality and public health. This study aimed to characterise the acute cytotoxicity of a hydraulic fracturing fluid using a human gastrointestinal cell line and, using this data, contribute to the understanding of potential human health risks posed by coal seam gas (CSG) extraction in Queensland, Australia. Previous published research on the health effects of hydraulic fracturing fluids has been limited to desktop studies of individual chemicals. As such, this study is one of the first attempts to characterise the toxicity of a hydraulic fracturing mixture using laboratory methods. The fracturing fluid was determined to be cytotoxic, with half maximal inhibitory concentrations (IC50) values across mixture variations ranging between 25 and 51mM. When used by industry, these fracturing fluids would be at concentrations of over 200mM before injection into the coal seam. A 5-fold dilution would be sufficient to reduce the toxicity of the fluids to below the detection limit of the assay. It is unlikely that human exposure would occur at these high (‘before use’) concentrations and likely that the fluids would be diluted during use. Thus, it can be inferred that the level of acute risk to human health associated with the use of these fracturing fluids is low. However, a thorough exposure assessment and additional chronic and targeted toxicity assessments are required to conclusively determine human health risks.

scholarly journals Laboratory Testing of Fracture Conductivity Damage by Foam-Based Fracturing Fluids in Low Permeability Tight Gas Formations

Energies ◽  
2021 ◽  
Vol 14 (6) ◽  
pp. 1783
Author(s):  
Klaudia Wilk-Zajdel ◽  
Piotr Kasza ◽  
Mateusz Masłowski
Keyword(s):  
Hydraulic Fracturing ◽  
Guar Gum ◽  
Polymer Concentration ◽  
Laboratory Research ◽  
Damage Effect ◽  
Tight Gas ◽  
Fracturing Fluid ◽  
Fracture Conductivity ◽  
Fracturing Fluids ◽  
Sandstone Rock

In the case of fracturing of the reservoirs using fracturing fluids, the size of damage to the proppant conductivity caused by treatment fluids is significant, which greatly influence the effective execution of hydraulic fracturing operations. The fracturing fluid should be characterized by the minimum damage to the conductivity of a fracture filled with proppant. A laboratory research procedure has been developed to study the damage effect caused by foamed and non-foamed fracturing fluids in the fractures filled with proppant material. The paper discusses the results for high quality foamed guar-based linear gels, which is an innovative aspect of the work compared to the non-foamed frac described in most of the studies and simulations. The tests were performed for the fracturing fluid based on a linear polymer (HPG—hydroxypropyl guar, in liquid and powder form). The rheology of nitrogen foamed-based fracturing fluids (FF) with a quality of 70% was investigated. The quartz sand and ceramic light proppant LCP proppant was placed between two Ohio sandstone rock slabs and subjected to a given compressive stress of 4000–6000 psi, at a temperature of 60 °C for 5 h. A significant reduction in damage to the quartz proppant was observed for the foamed fluid compared to that damaged by the 7.5 L/m3 natural polymer-based non-foamed linear fluid. The damage was 72.3% for the non-foamed fluid and 31.5% for the 70% foamed fluid, which are superior to the guar gum non-foamed fracturing fluid system. For tests based on a polymer concentration of 4.88 g/L, the damage to the fracture conductivity by the non-foamed fluid was 64.8%, and 26.3% for the foamed fluid. These results lead to the conclusion that foamed fluids could damage the fracture filled with proppant much less during hydraulic fracturing treatment. At the same time, when using foamed fluids, the viscosity coefficient increases a few times compared to the use of non-foamed fluids, which is necessary for proppant carrying capacities and properly conducted stimulation treatment. The research results can be beneficial for optimizing the type and performance of fracturing fluid for hydraulic fracturing in tight gas formations.

Success Story of Optimizing Hydraulic Fracturing Design at Alpha Low-Permeability Reservoir

2021 ◽  
Author(s):  
Mario Hadinata Prasetio ◽  
Hanny Anggraini ◽  
Hendro Tjahjono ◽  
Aditya Bintang Pramadana ◽  
Aulia Akbari ◽  
...  
Keyword(s):  
Hydraulic Fracturing ◽  
Oil Recovery ◽  
History Matching ◽  
Initial Period ◽  
Earth Model ◽  
Low Permeability ◽  
Stress Profile ◽  
Reservoir Pressure ◽  
Fracturing Fluid ◽  
Fracture Closure

Abstract This paper describes the evolution of the hydraulic fracturing approach and design in the Alpha reservoir over the past years. Alpha reservoir in XYZ field is a laminated sandstone reservoir with low permeability in the range of 20 to 140 md at a depth of approximately 4,000 to 4,500 ft true vertical depth (TVD). XYZ field is located in Rokan block, Riau, Central Sumatra region. Due to Alpha reservoir's nature, producing from this reservoir commercially requires stimulation. Hydraulic fracturing has been applied as the selected stimulation method to increase productivity from this reservoir. However, several challenges were recognized during the initial period, such as depleted reservoir pressure, indication of fracture height growth, and low to medium Young's modulus, which leads to few screened-out cases as well as low production gain after the fracturing treatment. The fracturing job in Alpha reservoir has been applied since 2002. However, pressure depletion was observed through this time until waterflood optimization started in May 2018 by converting commingled injection to injection dedicated to the Alpha reservoir. The pressure responded and increased from 350 psi to approximately 800 psi. Hence this reservoir still cannot be produced in single completion without the hydraulic fracturing job due to laminated reservoir and low-permeability character. A detailed look at the mechanical earth model (MEM) was done to revise the elastic properties and stress profile considering reservoir pressure change. The revised model was later used as an input for fracture geometry simulation. Calibration injection tests were performed and analyzed prior to the main fracturing treatments to determine fracture closure pressure and leakoff characteristics, which led to fracturing fluid efficiency. Results of these tests were used in job modifications regarding pad percentage, fracturing fluid rheology, proppant volume, and proppant concentration. Pressure history matching both after fracturing and in real time as well as the temperature log were used to validate the MEM and fracture geometries. Each change, approach, and impact were documented and statistically analyzed to determine a generic trend and design envelope for the Alpha reservoir. Between 2019 and 2020, nine wells were stimulated that specifically targeted the Alpha reservoir, with continuous improvement in fracturing design and geomechanics properties with each well. After fracturing, the 30-day oil recovery was superior, higher than previous fractured wells, reaching more than 255 BFPD on average. The successful development of the Alpha reservoir with hydraulic fracturing led to further milestones to maximize oil recovery in XYZ field.

Experimental and numerical study of erosion in a non-Newtonian hydraulic fracturing fluid

Wear ◽  
2019 ◽  
Vol 422-423 ◽  
pp. 1-8 ◽  
Author(s):  
Zhiguo Wang ◽  
Jun Zhang ◽  
Siamack A. Shirazi ◽  
Yihua Dou
Keyword(s):  
Hydraulic Fracturing ◽  
Numerical Study ◽  
Fracturing Fluid ◽  
Hydraulic Fracturing Fluid
Sign in / Sign up

Export Citation Format

Share Document