Effect of the roll gap on the grainforming capacity and granulometric composition of intermediate products of grain grinding triticale

2021 ◽  
Vol 30 (6) ◽  
pp. 36-38
Author(s):  
R.Kh. Kandrokov ◽  
◽  
G.N. Pankratov ◽  
I.U. Kusova ◽  
A.A. Ryndin ◽  
...  

The article presents the results of a study of the effect of the inter-roll gap of the grinding-sorting unit RSA-4–2 with grooved rolls on the croup-forming ability and the granulometric composition of the intermediate products of grinding various grades of triticale grain. The indicators of the extraction of intermediate products of grinding grain of triticale of various grades, differing in vitreousness, have been determined. The article presents the results of evaluating the grain-forming properties of the studied samples of triticale grain, as well as an analysis of the particle size distribution depending on the size of the roll gap. The results obtained indicate good cereal-forming properties of the presented samples and can be recommended for industrial processing into high-quality bakery flour

2014 ◽  
Vol 968 ◽  
pp. 40-43 ◽  
Author(s):  
Cong Xue Tian

Short sulfate process was developed to produce rutile TiO2 white pigment by using low concentration industrial TiOSO4 solution as raw material via self-generated seeded thermal hydrolysis route. The concentration of TiOSO4 solution had significantly influenced the structure and pigment properties of rutile TiO2 white pigment. The samples were characterized by XRD, particle size distribution and pigment properties test. Appropriate concentration of TiOSO4 was beneficial to promoting hydrolysis process in a proper way and obtaining favorable structure and high quality white pigment. The optimized concentration of TiOSO4 solution was of 191.20 g/L.


Author(s):  
О.М. Голодная ◽  
Е.А. Жарикова

Изучение гранулометрического состава почв Ханкайского заповедника показало, что профили почв представляют собой многослойные спектры различного литологического сложения. Сложность почвенных профилей по гранулометрическому составу определяется степенью проявления поемного и аллювиального процессов, литологическими особенностями почвообразующего материала. По типу сложения выделено несколько литологических групп. Темно-гумусовые глеевые, аллювиальные луговые глеевые почвы и буроземы глееватые отличаются резкой дифференциацией профиля по гранулометрическому составу на верхнюю легкую и нижнюю глинистую толщу. Для этих почв отмечено наибольшее содержание фракций физической глины и ила по всему почвенному профилю. Буроземы типичные и аллювиальные луговые глееватые, вышедшие из зоны затопления, характеризуются литологически однородным легким составом. В этих почвах выявлено высокое содержание фракций мелкого песка. The soil profiles the Khankaiskiy Nature Reserve represent multilayer spectra of various lithological addition. The complexity of soil profiles in terms of particle-size distribution is determined by the degree of manifestation of soil and alluvial processes, lithological features of soil-forming material. Several lithological groups are distinguished by the type of texture. Dark humus gley, alluvial meadow gley soils and burozem gleyic shrouds are distinguished by a sharp differentiation of the profile by granulometric composition into an upper light and lower clay thickness. The largest content of fractions of physical clay and silt was noted throughout the profiles for these soils. Burozem typical and alluvial meadow gleyic soils that have emerged from the flood zone characterize this with a lithologically homogeneous light composition. A high content of fine sand fractions was revealed in these soils.


2020 ◽  
Vol 993 ◽  
pp. 391-397 ◽  
Author(s):  
Sha Qiu ◽  
Bin Ke Chen ◽  
Chang Shu Xiang

Since molybdenum has very high melting point of 2620 °C, there are many difficulties in its forming and post-processing, especially for deep processing. Furthermore as molybdenum is expensive, the utilization rate is important for the molybdenum processing. Additive manufacturing can directly manufacture the parts without mold and increase the utilization rate, and brings an opportunities for the new direction of deep processing for molybdenum. Due to the high quality requirements of molybdenum powder in additive manufacturing technology, the high-quality spherical molybdenum powder was prepared by plasma rotating electrode process method in the present study. The morphology, particle size and particle size distribution, chemical and physical properties were investigated. The molybdenum powder prepared by plasma rotating electrode process method showed to have high purity, high sphericity, good fluidity and high bulk density, proper particle size distribution and low gap element within the powder. The microstructure of the powder was a mixed structure of dendrites and cell crystals formed by rapid solidification, and as the particle size of the powder gradually decreased, the microstructure of the powder surface was remarkably refined. Within a certain range, the molybdenum powder with a wide particle size distribution had better fluidity and higher bulk density. The high-quality spherical molybdenum powder was prepared by plasma rotating electrode process method, which can meet the requirements of additive manufacturing technology for powder material performance.


2020 ◽  
Author(s):  
Andrey Zakharov ◽  
Svetlana Sycheva ◽  
Pavel Panin

<p>Granulometric composition and magnetic susceptibility are important indicators of the genesis of paleosols, loesses and other newest sediments. Along with other characteristics, they make it possible to reconstruct evolution, surrounding landscapes and climatic changes in the past. The stratotypic section "Alexandrovsky quarry" (natural monument in Kursk, 51°35′31″N, 36°3′21″E) reveals the most complete structure of the Late Pleistocene for the periglacial zone of the East European Plain. Soil-sediment stratum with a thickness of more than 10 m represents the filling of a small buried valley. The formation of the stratum took place practically without interruptions during the last 130 thousand years. It includes two interglacial paleosols: Holocene (Marine Isotope Stage 1) and Ryshkovo (MIS 5е); four interstadial paleosols: Kukuevka (MIS 5с), Streletsa (MIS 5а), Alexandrovka (MIS 3.1), Bryansk (MIS 3.2), and also loess, pedo-sediment and other deposits that have periodically experienced exposuring to cryogenesis [Sycheva, 2012]. The particle size distribution and the magnitude of the magnetic susceptibility reflect the complex history of the stratum formation and reveal detailed climate changes in the Late Pleistocene. The particle size distribution was determined with fractionation method by Kaczynski and by instrumental laser-diffractometry method on a "Malvern Mastersizer 3000" particle size analyzer. The magnetic susceptibility was determined by a SatisGeo KM-7m field capameter with triplicate measurements for every 6 cm.<br>A change in the granulometric composition from Ryshkovo (MIS 5e) medium loamy deposits to heavy loamy soils and loess belonging to MIS 3.1 was established. The largest value of the clay fraction (<0.001 mm) is characteristic of the MIS 3 paleosols. Significant values of this fraction are also characteristic of the humus horizons of paleosols and Bt horizon Ryshkovo paleosol (MIS 5e). The lowest clay content is observed in loess, especially in their upper parts and in the eluvial horizon of the Rushkovo paleosol (MIS 5е). The data gained by instrumental method of particle size determination is different from such as data gained by the Kaczynski method for the upper heavy loam stratum (MIS 3-1). The predominant fraction is fine dust, in contrast to the lower sediments MIS 5-4, where the coarse silt fraction prevails. Whereas according to data gained by Kaczynski method, the coarse silt fraction prevails in the entire studied thickness of the loess-soil sequence.<br>Magnetic susceptibility (MS) depends on the content of superparamagnetic mineral in each of the samples and represents levels of pedogenesis in loess deposits. The highest MS values are characteristic of the humus horizon of the interglacial Ryshkovo paleosol (MIS 5e). Followed by Ah horizon of the Streletsa paleosol (MIS 5a) and underlying loess. Smaller values are characteristic of the Kukuevka (MIS 5c) paleosol. But they are more eroded and represented by transitional AB horizons. Loess is characterized by the lowest values of magnetic susceptibility.<br>The study was funded by RFBR according to the research project № 19-29-05024.</p>


Author(s):  
K. A. Alvanian ◽  
◽  
A. V. Andrianov ◽  
Yu. N. Selezneva ◽  
◽  
...  

High pressures in the soil mass form the specific properties of the soil, in particular the effect on the particle size distribution. The purpose of the work is to assess the change in the granulometric composition of bentonite clay under the pressure. Experimental data on the pressure (P = 0-800 MPa) influence on the change in particle size distribution in clay samples from the deposit are presented. As a result of the experiment, two classes were identified in which the change in the content of fractions is different. These changes are due to the aggregation and dispersion of particles. Mathematical models have been calculated that make it possible to predict the content of fractions depending on the clay activation pressure


2020 ◽  
Vol 69 (4) ◽  
pp. 102-106
Author(s):  
Shota Ohki ◽  
Shingo Mineta ◽  
Mamoru Mizunuma ◽  
Soichi Oka ◽  
Masayuki Tsuda

1995 ◽  
Vol 5 (1) ◽  
pp. 75-87 ◽  
Author(s):  
Christine M. Woodall ◽  
James E. Peters ◽  
Richard O. Buckius

Sign in / Sign up

Export Citation Format

Share Document