scholarly journals Three Dimensional Effect of Axial Magnetic Field to Suppress Convection in the Solvent of Ge0.98Si0.02 Grown By the Traveling Solvent Method

2021 ◽  
Author(s):  
Leily Abidi
Keyword(s):  
Magnetic Field ◽  
Stokes Equations ◽  
Axial Magnetic Field ◽  
Three Dimensional ◽  
Maximum Velocity ◽  
Navier Stokes ◽  
Growth Interface ◽  
Navier Stokes Equations ◽  
Solvent Method ◽  
Element Technique

A three dimensional numerical simulation of the effect of an axial magnetic field on the fluid flow, heat and mass transfer within the solvent of GE0.98Si0.02 grown by the travelling solvent method is presented. The full steady state Navier-Stokes equations, as well as the energy, continuity and the mass transport equations, were solved numerically using the finite element technique. It is found that a strong convective flow exists in the solvent, which is known to be undesirable to achieve a uniform crystal. An external axial magnetic field is applied to suppress this convection. By increasing the magnetic induction, it is observed that the intensity of the flow at the centre of the crucible reduces at a faster rate than near the wall. This phenomenon creates a stable and flat growth interface and the silicon distribution in the horizontal plane becomes relatively homocentric. The maximum velocity is found to obey a power law with respect to the Hartmann number Umax Ha⁻⁷/⁴

scholarly journals Three Dimensional Effect of Axial Magnetic Field to Suppress Convection in the Solvent of Ge0.98Si0.02 Grown By the Traveling Solvent Method

2021 ◽  
Author(s):  
Leily Abidi
Keyword(s):  
Magnetic Field ◽  
Stokes Equations ◽  
Axial Magnetic Field ◽  
Three Dimensional ◽  
Maximum Velocity ◽  
Navier Stokes ◽  
Growth Interface ◽  
Navier Stokes Equations ◽  
Solvent Method ◽  
Element Technique

A three dimensional numerical simulation of the effect of an axial magnetic field on the fluid flow, heat and mass transfer within the solvent of GE0.98Si0.02 grown by the travelling solvent method is presented. The full steady state Navier-Stokes equations, as well as the energy, continuity and the mass transport equations, were solved numerically using the finite element technique. It is found that a strong convective flow exists in the solvent, which is known to be undesirable to achieve a uniform crystal. An external axial magnetic field is applied to suppress this convection. By increasing the magnetic induction, it is observed that the intensity of the flow at the centre of the crucible reduces at a faster rate than near the wall. This phenomenon creates a stable and flat growth interface and the silicon distribution in the horizontal plane becomes relatively homocentric. The maximum velocity is found to obey a power law with respect to the Hartmann number Umax Ha⁻⁷/⁴

Numerical Modeling of Si0.15Ge0.85 by the Traveling Solvent Method

2002 ◽  
Author(s):  
T. J. Makriyannis ◽  
M. Z. Saghir ◽  
D. Labrie
Keyword(s):  
Stokes Equations ◽  
Navier Stokes ◽  
Promising Technique ◽  
High Quality ◽  
Growth Interface ◽  
Navier Stokes Equations ◽  
Solvent Method ◽  
Buoyancy Convection ◽  
Strong Convection ◽  
Element Technique

The traveling solvent method (TSM) is a relatively new and promising technique for the production of high quality semiconductors. TSM has been tested on many alloys producing pure and homogeneous crystals. In the present study the effect of buoyancy convection on the growth of the Si0.15Ge0.85 crystal grown by the traveling solvent method is investigated under different heating conditions. The full Navier-Stokes equations together with the energy and solutal equations were solved numerically using the finite element technique. The model take into consideration the losses of heat by radiation and the use of the phase diagram to determine the silicon concentration at the growth interface. Results revealed a strong convection in the solvent, which in turn is detrimental to the growth uniformity in the crystal rod. Additional numerical results showed that the convective heat transfer significantly influences the solute distribution in the liquid zone and the growth rate increases substantially.

Buoyancy Convection During the Growth of SixGe1−x by the Traveling Solvent Method (TSM)

2004 ◽  
Vol 126 (2) ◽  
pp. 223-228 ◽  
Author(s):  
M. Z. Saghir ◽  
T. J. Makriyannis ◽  
D. Labrie
Keyword(s):  
Stokes Equations ◽  
Numerical Results ◽  
Silicon Concentration ◽  
Navier Stokes ◽  
Qualitative Comparison ◽  
Growth Interface ◽  
Navier Stokes Equations ◽  
Solvent Method ◽  
Buoyancy Convection ◽  
Element Technique

The traveling solvent method known as TSM is a process used to produce pure and homogeneous crystals structures. TSM has been tested on many alloys producing uniform and uncontaminated single crystals. In the present study the effect of buoyancy convection on the growth of the Si0.02Ge0.98 crystal grown by the traveling solvent method is investigated under different heating conditions. The full Navier-Stokes equations together with the energy and solutal equations are solved numerically using the finite element technique. The model takes into consideration the losses of heat by radiation and the use of the phase diagram to determine the silicon concentration at the growth interface. Results reveal a strong convection in the solvent, which in turn is detrimental to the growth uniformity in the crystal rod. Additional numerical results show that the convective heat transfer significantly influences the solute distribution in the liquid zone and affects the growth rate substantially. Qualitative comparison of the numerical results with the experiment conducted at Dalhousie University showed a good agreement for the silicon concentration at the growth interface.

Combined Marangoni and buoyancy convection in a porous annular cavity filled with Ag-MgO/water hybrid nanofluid

2021 ◽  
Vol 17 ◽  
Author(s):  
B. Kanimozhi ◽  
M. Muthtamilselvan ◽  
Qasem M. Al-Mdallal ◽  
Bahaaeldin Abdalla
Keyword(s):  
Magnetic Field ◽  
Stokes Equations ◽  
Volume Fraction ◽  
Axial Magnetic Field ◽  
Vertical Wall ◽  
Navier Stokes ◽  
Hybrid Nanofluid ◽  
Radial Magnetic Field ◽  
Navier Stokes Equations ◽  
Buoyancy Convection

Background: This article numerically examines the effect of buoyancy and Marangoni convection in a porous enclosure formed by two concentric cylinders filled with Ag-MgO water hybrid nanofluid. The inner wall of the cavity is maintained at a hot temperature and the outer vertical wall is considered to be cold. The adiabatic condition is assumed for other two boundaries. The effect of magnetic field is considered in radial and axial directions. The Brinkman-extended Darcy model has been adopted in the governing equations. Methods: The finite difference scheme is employed to work out the governing Navier-Stokes equations. The numerically simulated outputs are deliberated in terms of isotherms, streamlines, velocityand average Nusselt number profiles for numerous governing parameters. Results: Except for a greater magnitude of axial magnetic field, our results suggest that the rate of thermal transport accelerates as the nanoparticle volume fraction grows.Also, it is observed that there is an escalation in the profile of average Nusselt numberwith an enhancement in Marangoni number. Conclusion: Furthermore, the suppression of heat and fluid flow in the tall annulus is mainly due to the radial magnetic field whereas in shallow annulus, the axial magnetic field profoundly affects the flow field and thermal transfer.

scholarly journals Three-Dimensional Modeling of the Rotation Effect on the Growth of Ge₁₋ˣSiˣ, by the Traveling Solvent Method

2021 ◽  
Author(s):  
Theodore Jason Makriyannis
Keyword(s):  
Stokes Equations ◽  
Three Dimensional ◽  
Axial Rotation ◽  
Considerable Effect ◽  
Navier Stokes ◽  
Computational Time ◽  
Solvent Method ◽  
Three Dimensional Modeling ◽  
Continuity Equations ◽  
Element Technique

The travelling solvent method known as TSM is a process used to produce pure and homogeneous crystals. The TSM process has been tested on many alloys producing uniform and uncontaminated crystal products. A three-dimensional numerical simulation for the growth of Ge1-xSix by the travelling solvent method under axial rotation has been modelled. In this model a mesh sensitivity analysis has been carried out to find an optimum mesh which provides accurate results while saving computational time, The full Navier-Stokes equations together with the energy, mass transport and continuity equations were solved numerically using the finite element technique. The application of crucible rotation to the travelling solvent method is an attempt to control the buoyancy induced convection throughout the melt and to suppress the three-dimensional characteristics of unsteady heat flow. The application of different rotational speeds on the solvent has also been investigated. These different speeds of rotation were shown to have a considerable effect on the buoyancy induced flow. The solute distribution throughout the melt was also affected substantially. Taking these two factors into account plays a crucial role in the crystal growth process. The speed of rotation was found to have a significant effect on the intensity of the convective flow in the melt and an optimal rotational speed was encountered.

Simulation of Microfluidic Flow Using Ferrofluids

2008 ◽  
Author(s):  
Akshay C. Gunde ◽  
Sushanta K. Mitra
Keyword(s):  
Magnetic Field ◽  
External Magnetic Field ◽  
Flow Control ◽  
Magnetic Particles ◽  
Stokes Equations ◽  
Maximum Velocity ◽  
Additional Term ◽  
Navier Stokes ◽  
Navier Stokes Equations ◽  
Microfluidic Flow

Present day microfluidics widely uses electrokinetic effects like eletrosmosis and electrophoresis to achieve flow control. These methods require extensive micromachining processes. Also, the fabrication of valves and valve-seats is difficult, which frequently leads to leakages and eventual breakdown of the system. This paper introduces the use of ferrofluids as an alternative for flow control in microchannels. Numerical simulation of flow through a microchannel using a ferrofluid in the presence of an external magnetic field is performed by coupling the flow and magnetic phenomena. An additional term calculated from the ferrofluid magnetization equations, is introduced in the Navier-Stokes equations to account for the magnetic force. The maximum velocity in a magnetically driven flow is shown to be a linear function of magnitude of magnetization of the permanent magnet. Further, the insertion of micron-size magnetic particles (referred here as magnetic plugs) in the flow field has been discussed. These plugs can be used to provide appropriate barriers to the flow by controlling their movement externally. Using the combination of ferrofluid and magnetic plugs, flow control can be achieved by the variation of external magnetic field alone.

scholarly journals Three-Dimensional Modeling of the Rotation Effect on the Growth of Ge₁₋ˣSiˣ, by the Traveling Solvent Method

2021 ◽  
Author(s):  
Theodore Jason Makriyannis
Keyword(s):  
Stokes Equations ◽  
Three Dimensional ◽  
Axial Rotation ◽  
Considerable Effect ◽  
Navier Stokes ◽  
Computational Time ◽  
Solvent Method ◽  
Three Dimensional Modeling ◽  
Continuity Equations ◽  
Element Technique

The travelling solvent method known as TSM is a process used to produce pure and homogeneous crystals. The TSM process has been tested on many alloys producing uniform and uncontaminated crystal products. A three-dimensional numerical simulation for the growth of Ge1-xSix by the travelling solvent method under axial rotation has been modelled. In this model a mesh sensitivity analysis has been carried out to find an optimum mesh which provides accurate results while saving computational time, The full Navier-Stokes equations together with the energy, mass transport and continuity equations were solved numerically using the finite element technique. The application of crucible rotation to the travelling solvent method is an attempt to control the buoyancy induced convection throughout the melt and to suppress the three-dimensional characteristics of unsteady heat flow. The application of different rotational speeds on the solvent has also been investigated. These different speeds of rotation were shown to have a considerable effect on the buoyancy induced flow. The solute distribution throughout the melt was also affected substantially. Taking these two factors into account plays a crucial role in the crystal growth process. The speed of rotation was found to have a significant effect on the intensity of the convective flow in the melt and an optimal rotational speed was encountered.

Effects of stator splitter blades on aerodynamic performance of a single-stage transonic axial compressor

2020 ◽  
Vol 14 (4) ◽  
pp. 7369-7378
Author(s):  
Ky-Quang Pham ◽  
Xuan-Truong Le ◽  
Cong-Truong Dinh
Keyword(s):  
Stokes Equations ◽  
Three Dimensional ◽  
Axial Compressor ◽  
Aerodynamic Performance ◽  
Numerical Results ◽  
Single Stage ◽  
Navier Stokes ◽  
Navier Stokes Equations ◽  
Operating Stability ◽  
Length Coverage

Splitter blades located between stator blades in a single-stage axial compressor were proposed and investigated in this work to find their effects on aerodynamic performance and operating stability. Aerodynamic performance of the compressor was evaluated using three-dimensional Reynolds-averaged Navier-Stokes equations using the k-e turbulence model with a scalable wall function. The numerical results for the typical performance parameters without stator splitter blades were validated in comparison with experimental data. The numerical results of a parametric study using four geometric parameters (chord length, coverage angle, height and position) of the stator splitter blades showed that the operational stability of the single-stage axial compressor enhances remarkably using the stator splitter blades. The splitters were effective in suppressing flow separation in the stator domain of the compressor at near-stall condition which affects considerably the aerodynamic performance of the compressor.

Sign in / Sign up

Export Citation Format

Share Document