scholarly journals Energy-efficient solutions of foundry class steelmaking electric arc furnace

Author(s):  
S.M Timoshenko ◽  
M.V Gubinski ◽  
E.M Niemtsev

Purpose. Substantiation of solutions aimed at reducing heat losses, mainly, by refractory lining during forced downtime and by steelmaking bath in conditions of traditionally low specific power of transformer. Methodology. Mathematical modeling of heat and mass transfer processes and numerical experiment. Findings. A mathematical model of energy-technological processes in arc furnace workspace has been developed to analyze and minimize energy consumption in daily production cycle. Geometrical and operating parameters are taken into account, in particular: variation in arcs energy efficiency at evolution of wells in charge under electrodes during melting process; circulation of melt due to bubbling with inert gas through bottom porous plug; energy loss on heat accumulation by refractory, with cooling water and off-gas. Originality. For the first time, the concept of increasing energy efficiency of arc furnace has been substantiated, based on the following set of solutions: increase in specific electrical power by reducing of charge at given productivity; reduction of bath shape factor (ratio of diameter to depth) from traditional 5 up to 2.5 by deepening and, accordingly, its radiating surface; optimization of walls and roof cooled surface relative area, where massive heat-absorbing refractory lining is not used; application of energy-saving water-cooled elements with spatial structure that promotes formation of heat-insulating and heat-accumulating slag filling. Practical value. Implementation of the set of energy-efficient solutions in conditions of typical 6 and 12-t foundry class arc furnaces provides reduction in power consumption and refractory expenditure by 1315 and 2830% respectively without significant changes in production infrastructure due to reducing energy loss, mainly, for accumulation of heat by refractory lining, and intensification of heat and mass transfer processes in forcibly stirred deep bath.

Author(s):  
S.N. Timoshenko ◽  
A.P. Stovpchenko ◽  
Yu.V. Kostetski ◽  
M.V. Gubinski

Purpose: To review an advanced solutions to improve the energy efficiency of electric arc furnace (EAF), and presentation of own new efficient low-cost solutions with regard to needs of electrometallurgical complex of Ukraine. Design/methodology/approach: Numerical simulation and industrial experiment is used. The patterns and parameters of heat and mass transfer processes, hydromechanics in a steelmaking bath of an arc furnace, thermal operation of water-cooled elements and gas dynamics in EAF workspace, are the subject scope of the paper. Findings: Energy-efficient solutions for steelmaking: bath geometry, design features of water-cooled elements (WCE), distributed aspiration system, and the mid-temperature scrap preheating. Research limitations/implications: Influence of the bath depth on heat and mass transfer and heat loss by radiation; influence of the spatial structure of WCE on heat loss by radiation; the dispersion of aspiration on the amount of fugitive emissions through electrode gaps are established. Practical implications: Grounds to improve EAF melting space, water-cooled elements, aspiration system and utilization of energy loss are obtained. Use of the set of solutions in 120-ton EAF can reduce energy consumption by 56-68 kWh/ton. Originality/value: The new concepts of deep steelmaking bath, WCE with spatial structure and system of dispersed aspiration of the EAF are elaborated.


2018 ◽  
Vol 43 (45) ◽  
pp. 20474-20487 ◽  
Author(s):  
Marcin Pajak ◽  
Marcin Mozdzierz ◽  
Maciej Chalusiak ◽  
Shinji Kimijima ◽  
Janusz S. Szmyd ◽  
...  

Sign in / Sign up

Export Citation Format

Share Document