scholarly journals The problems of the Szeletian as seen from Hungary

2018 ◽  
Vol 9 ◽  
pp. 19-48 ◽  
Author(s):  
Zsolt Mester

The Szeletian is widely accepted as one of the cultural units typical of the transition from the Middle to Upper Palaeolithic in Central Europe and associated with Neanderthals. Its eponymous site is Szeleta Cave in northeastern Hungary, excavated mainly from 1906 to 1913 by O. Kadić. Although the Szeletian has altogether more than one hundred years of research history, this cultural unit is far from being clearly defined. This paper gives an overview of the related problems from typological, technological, chronological and archaeological points of view, with a special focus on those concerning the open-air and cave sites of Hungary.

Author(s):  
Andrzej Wiśniewski ◽  
Marcin Chłoń ◽  
Marcel Weiss ◽  
Katarzyna Pyżewicz ◽  
Witold Migal

Abstract This paper attempts to show that manufacture of Micoquian bifacial backed tools was structured. Data for this study were collected using a comprehensive analysis of artefacts from the site Pietraszyn 49a, Poland, which is dated to the beginning of Marine Isotope Stage 3. Based on the whole data set, it was possible to distinguish four stages of the manufacturing process. During manufacturing, both mineral hammer and organic hammer were used. The tools were usually shaped due to distinct hierarchization of faces. The study has also shown that the shape of bifacial tools from Pietraszyn 49a is very similar to the other Micoquian examples from central Europe. The ways of shaping of some tools are finding their counterparts also in the Early Upper Palaeolithic inventories, but the similarities are rather limited to the narrow range of preparation of bifacial form.


2020 ◽  
Vol 12 (5) ◽  
pp. 1893 ◽  
Author(s):  
Aleksandrina V. Mavrodieva ◽  
Rajib Shaw

Faced with a number of socio-economic challenges and a continuously rising risk of more frequent and higher-impact disasters, the Japanese government, in cooperation with the private sector, has formulated a new comprehensive strategy, under the name of “Society 5.0”, which is to utilize a number of various technological innovative solutions in an attempt to provide a secure future for its citizens, centering around several important sectors. The current paper aims to discuss disaster risk and climate change policies in Society 5.0 in particular, with some special focus on adaptation and inclusiveness. We start with giving details on the Society 5.0 concept and its goals, after which we focus more specifically on how disaster and climate change policies are integrated into the new strategy and proceed to discuss several contentious issues which represent both opportunities and risks or challenges for implementing the concept in a truly sustainable way. The paper tries to present various points of view and hopes to provide some food for future thought and research, rather than solutions or specific suggestions.


Heritage ◽  
2021 ◽  
Vol 4 (4) ◽  
pp. 4184-4206
Author(s):  
Sanja Gašparović ◽  
Tihomir Jukić ◽  
Ana Mrđa

The paper explores the possibilities of the structural and functional transformation of blocks in the historical center of Zagreb as a part of modernization after many years of neglect as well as earthquakes in 2020. The research aims to determine how the existing block tissue corresponds with the needs of today’s residents and the possibility of its improvement. The historical circumstances in which the blocks were formed and underwent the most significant changes and modern processes that affect the state and value are determined. There is a special focus on the interior of the block (courtyards), as well as on the spaces on the ground floors of street facades, where numerous, unexplored changes can be observed. The findings provide starting points for desirable structural–functional transformations of blocks and stem from the synthesis and interpretation of knowledge from four interrelated parts of the research. The characteristics of blocks have changed during city development stages, as depicted by an analysis and graphic interpretation of historical maps and urban plans (1864–2021). Influences of modern processes on changes of the city are determined on the basis of the synthesis of previous research from different interdisciplinary points of view; a detailed analysis of the structural–functional changes is conducted on the example of three selected blocks. Transformation models for three selected blocks are proposed.


1959 ◽  
Vol 25 ◽  
pp. 260-269 ◽  
Author(s):  
C. B. M. McBurney

During the Easter and Summer of 1958 a programme of investigations into British Upper Palaeolithic cave deposits was initiated on behalf of the Prehistoric Society, with the aid of a grant from the Research Fund. The work was further supported by the Crowther Beynon Fund of the Museum of Archaeology and Ethnology of Cambridge. Labour in the field was provided by students in the Department of Archaeology and Anthropology of the University, with notable assistance from several members of the Society in different areas.The prime objectives of the work, which is still in progress, are to define more precisely the character of the different stages in the British Upper Palaeolithic, and to study them against their chronological and environmental background. In this way it is hoped to throw light on wider problems of the relation of British finds to the rapidly emerging picture of the Late Glacial hunting communities of Central Europe and the Low Countries.


2014 ◽  
Vol 44 (8) ◽  
pp. 949-960 ◽  
Author(s):  
Leo Bont ◽  
Hans Rudolf Heinimann ◽  
Richard L. Church

One of the classic operations problems in forest management is the layout of a harvesting system. This paper addresses the design of a harvesting system in areas characterized by steep slopes requiring cable-based harvesting. Layout optimization often involves numerous potential cable alignments and a small number of potential landings. In this paper we develop a model that addresses steep slope conditions found in central Europe that involve a large number of potential landings and cable alignments. In addition we extend existing work by considering variable-length alternatives for each feasible cable alignment. We construct three models, one for single-length cable options and two for variable-length alternatives and test their efficacy in solving 18 different harvesting area problems. We show that one of the variable-length alternative models can be solved in computer times that are competitive with the single-length option model. Overall, the savings that can be attributed to variable-length options are modest, but the alignments found by the variable-length options models are more realistic from forest engineers’ points of view, which will aid in its use and adoption.


1992 ◽  
Vol 58 (1) ◽  
pp. 1-20 ◽  
Author(s):  
J. K. KozŁowski

During the Last Interglacial Middle Palaeolithic industries of Crvena Stijena-type rich in side-scrapers with Levallois technique of recurrent type are specific to the Balkans. These industries have analogies in Anatolia and the northern part of the Middle East (Zagros-Group), but are different from industries typical of the middle Danube basin (Taubachian) and northern Central Europe (Moustero-Levalloisian). In the period preceding and immediately following the Lower Pleniglacial the Balkans were dominated by typical Mousterian and Moustero-Levalloisian, frequently with leaf points, similar to the industries of the lower Danube and Dniester basins, but unknown in western Anatolia. During the same period Eastern Micoquian developed in the middle Danube basin and northern Central Europe. Moustero-Levalloisian with leaf points persisted until the Early Interpleniglacial, but only in exceptional cases developed some Upper Palaeolithic features, and always without typical Aurignacian forms. The Aurignacian, unless it appears as a first Upper Palaeolithic culture in the Balkans with earliest dates in Europe (>40,000 years BP), seems to be an intrusive unit without any roots in the local Middle Palaeolithic. After 30,000 years BP, parallel to the Late Aurignacian, the first industries with backed blades appear. In the early stage these developed independently from those of Central Europe. Only after 26,000/24,000 BP were they followed in the eastern Balkans by assemblages strongly linked both morphologically and by raw materials to the Gravettian of the middle Danube basin. In the western Balkans, after 20,000 years BP, assemblages with shouldered points appeared, also probably of middle Danube origin. During the Last Interglacial and Interpleniglacial the territory of Balkans played an important transitional role between Anatolia and Central Europe; in the two Pleniglacials of the Würm this territory became some kind of cul-de-sac as the refugium for population groups from the middle Danube and northern Central Europe.


Sign in / Sign up

Export Citation Format

Share Document