8. Role of thermal insulation; Building design and choice of system

1996 ◽  
pp. 113-120
Author(s):  
Jean-François Rozis ◽  
Alain Guinebault
2015 ◽  
Vol 14 ◽  
pp. 383-389 ◽  
Author(s):  
Kristen Parrish ◽  
Reshma Singh ◽  
Szu-Cheng Chien
Keyword(s):  

2021 ◽  
Vol 3 (4) ◽  
pp. 295-311
Author(s):  
AbuRawi Mustafa ALMARKIYAH ◽  
Fouziya Alzarqani Ipraheem FADHLULLAH

Tripoli is a city of a Mediterranean Sea climate; this has contributed with some social and religious factors to affect the architectural and urban design, which all originally has come from the Islamic content. This study argues the climatic features of Tripoli in order to show the ways followed by the Libyan Muslim architect. In other words, these ways were used to adapt with the climate and create the demanding architectural treatments, which have served the building units. This is considered as a study case that can discuss the possibility of the climatic reflection on the walls. That is to say, the walls’ thickness, the type of the used substance in building, the substance’s properties, the type of roof used in covering the building units and the architectural design of the building as treatments achieved professionally by the architect in decreasing the heat in summer and increasing the heat in winter through the mass block. Additionally, the researchers have stated that Tripoli’s building design respected the privacy of the inhabitants and their isolation from the world outside their buildings. That is because they wanted to have their own cold spaces inside which were rich of light, air and shadow. As a result of the aforementioned considerations, the architectural buildings contained the uncovered space and the broken entrance to keep the privacy from the passengers and to protect the inhabitants from wind and sand. These were regarded as final solutions for the architectural and climatic problem. Further, this study illustrates the active role of using the planning including the architectural formations and the treatments of motion path. That is according to their width, their length, their form, their guidance and their direction change in order to make shadow and isolate the front of buildings. This also contributed to give the streets the northern wind which in turn helped to keep the air moving as long as possible to tone down the climatic influences. Moreover, the planning aimed to show its turn through analytical, architectural and documentary survey for realistic examples in the archeological registrar of the potential city treatments. These architectural elements were important in making the sustainable architecture in respect to the environment and human relaxation requirements. Finally, the researchers measured the following factors temperatures, wind, rain, and ratio humidity for variety of spaces in the city. That was followed by qualitative and quantitative statistical analysis supported by graphs


2008 ◽  
Vol 3 (2) ◽  
pp. 20-25
Author(s):  
Dick Clarke

Is “the new modernism” in domestic architecture—sometimes called “internationalism”—a useful step on the road toward sustainable buildings? Mindless recreations of traditional forms from other times and places are no better, as many writers have noted, but any building's natural and cultural context must play a fundamental role in the design, materials selection, and even the detailing, if sustainability is to be more readily achieved. The role of place-based planning has been well researched and reported (Clarke 2006; Mant 1998, 2000; NSW Department of Urban Affairs and Planning 2001). Less well understood is the role of “localness” in building design. This informs the overall form of buildings, and their detailing, as well as their technical functionality. A local understanding stems from a sense of materials, climate, and indigenous or local culture, and informs the design process at every level. In this article, the position of internationalist domestic architecture (espoused in glossy architecture publications) is criticised, drawing also on previous research (a case study of the outcomes of a place-based planning instrument, by the author, and a joint paper on locality-based design written jointly with Trevor King). The internationalist design approach is shown not to provide culturally appropriate or technically sustainable buildings.


Energies ◽  
2019 ◽  
Vol 12 (17) ◽  
pp. 3354 ◽  
Author(s):  
Piselli ◽  
Pisello ◽  
Saffari ◽  
Gracia ◽  
Cotana ◽  
...  

Cool roof effectiveness in improving building thermal-energy performance is affected by different variables. In particular, roof insulation level and climate conditions are key parameters influencing cool roofs benefits and whole building energy performance. This work aims at assessing the role of cool roof in the optimum roof configuration, i.e., combination of solar reflectance capability and thermal insulation level, in terms of building energy performance in different climate conditions worldwide. To this aim, coupled dynamic thermal-energy simulation and optimization analysis is carried out. In detail, multi-dimensional optimization of combined building roof thermal insulation and solar reflectance is developed to minimize building annual energy consumption for heating–cooling. Results highlight how a high reflectance roof minimizes annual energy need for a small standard office building in the majority of considered climates. Moreover, building energy performance is more sensitive to roof solar reflectance than thermal insulation level, except for the coldest conditions. Therefore, for the selected building, the optimum roof typology presents high solar reflectance capability (0.8) and no/low insulation level (0.00–0.03 m), except for extremely hot or cold climate zones. Accordingly, this research shows how the classic approach of super-insulated buildings should be reframed for the office case toward truly environmentally friendly buildings.


1994 ◽  
Vol 10 (2) ◽  
pp. 439-446
Author(s):  
Julie Mark Cohen

The authors should be commended for their pioneering research work on structural cladding and energy-dissipating connections. This discussion has been written to help ensure that this research, which is multidisciplinary in nature, leads to practical applications. All structural engineering researchers must recognize that structural cladding design is one of the broadest building-related research topics that can be tackled. They should not focus only on topics that have roots in structural engineering alone, and thus deny the integral role of structural cladding in building design. The importance of a building systems approach must be recognized. In doing so, the role of the architect will become obvious, and a promising collaborative effort will be established. This discussion is made from the perspective of a background in structural engineering and architectural research and practice.


2017 ◽  
Vol 87 (3) ◽  
pp. 74-81 ◽  
Author(s):  
Ian Keough ◽  
Anthony Hauck
Keyword(s):  

2013 ◽  
Vol 17 (2) ◽  
pp. 349-364 ◽  
Author(s):  
Sidi Bekkouche ◽  
Tayeb Benouaz ◽  
Mohamed Cherier ◽  
Maamar Hamdani ◽  
Mohamed Yaiche ◽  
...  

In desert regions, the orientation of buildings has an important influence in the inside air temperature. In the present work, we carry out a study on the influence of the buildings orientation as well as the thermal insulation on the internal temperature. To do so, we have considered the case where only the exposed walls are isolated. The main objective of the current work is to determine the temperatures of the building in question with and without thermal insulation. This study aims at assessing also the geographic parameter enhancing or damping the role of thermal inertia, providing a variety of results. As result, this work proves that stones play a contradictory role on thermal comfort. We have verified that thermal insulation is specified to reduce heat transfer through the building. Concerning the orientation, results indicates that the variation in orientation does not influence significantly the internal air temperature of a well thermally insulated building. Moreover, in hot period, whatever orientation considered, the phenomenon of overheating presents a serious problem to minimize consumption of energy and control of indoor temperature in case of building without insulation. The numerical data was compared to the experimental measurements in order to validate the mathematical model. In conclusion, to achieve a better thermal comfort arid and semi arid regions, the habitation will have to be situated in south flan of a hill to satisfy the two strategies (hot and cold).


2014 ◽  
Vol 935 ◽  
pp. 18-22
Author(s):  
Fatemeh Masoumian

Nowadays, the shortages of fossil based energy on the earth and the pollution caused by using them is a noticeable problem that people are challenging with. As a result, human try to use natural resources vastly instead of fossil-based ones to reduce their consumption dramatically. In this circumstance, the role of architects are more important than ever in reducing the need for energy by proper designing likewise the past construction history. Green building design criteria emphasizes the energy-efficient performance of fenestration materials. Iran is a country comprising of four main different climatic areas. Selecting materials and using proper techniques for a building project is a challenging task in each part. Ancient buildings were built by different materials, techniques and forms in different parts of this country. One of the main parts of climatic areas in Iran is the hot and dry climates such as deserts. The appropriate materials and techniques which were used in ancient buildings in this part of the country to make this area comfortable for people will be investigated in this paper. Moreover, the buildings of Kashan, located in the desert part of Iran, will be mentioned as case study.


Sign in / Sign up

Export Citation Format

Share Document