The Localized Corrosion Behavior Associated with Microstructure of F53 Super Duplex Stainless Steel

2015 ◽  
Vol 53 (7) ◽  
pp. 464-473 ◽  
Author(s):  
Soon-Tae Kim ◽  
In-Sung Lee ◽  
Kyeong-Ho Kong ◽  
Yong-Soo Park ◽  
Jong-Hoon Lee ◽  
...  
CORROSION ◽  
10.5006/3746 ◽  
2021 ◽  
Author(s):  
Víctor Vargas ◽  
Apolinar Albiter-Hernandez ◽  
Marco Dominguez Aguilar ◽  
Gerardo Altamirano-Guerrero ◽  
Cuahtemoc Maldonado

The effect of weld passes and single V grove designs, on the corrosion resistance of dissimilar welds of a low alloy steel and a super-duplex stainless steel, was studied in synthetic brine. Welds were manufactured in argon by gas tungsten arc (GTA) technique and joined by a high nickel wire of super-duplex stainless steel. Samples of weld regions were characterized by composition scans, electrochemical measurements, micro-hardness and scanning electron microscopy. In X52/ER2594, a transition region (TR) of grain boundaries type II and a band of martensite were formed. The base metal of X52 underwent the highest corrosion rate and localized corrosion occurred in the heat affected zone. Interface ER2594/25Cr7Ni and 25Cr7Ni showed the presence of pitting near intermetallics.


Metals ◽  
2019 ◽  
Vol 9 (5) ◽  
pp. 529 ◽  
Author(s):  
Federica Zanotto ◽  
Vincenzo Grassi ◽  
Andrea Balbo ◽  
Fabrizio Zucchi ◽  
Cecilia Monticelli

This paper reports the effects of thermal aging between 650 and 850 °C on the localized corrosion behavior of lean duplex stainless steel (LDSS 2404). Critical pitting temperature (CPT) and double loop electrochemical potentiokinetic reactivation (DL-EPR) tests were performed. The localization of pitting attack and intergranular corrosion (IGC) attack after DL-EPR was investigated by optical (OM) and scanning electron microscopy (SEM) and by focused ion beam (FIB) coupled to SEM. Thermal aging caused the precipitation of mainly chromium nitrides at grain boundaries. Aging at 650 °C or short aging times (5 min) at 750 °C caused nitride precipitation mainly at α/α grain boundaries as a result of fast diffusion of chromium in this phase. Aging at 850 °C or aging times from 10 to 60 min at 750 °C also allowed the precipitation at the α/γ interface. Nitrides at γ/γ grain boundaries were observed rarely and only after long aging times (60 min) at 850 °C. Electrochemical tests showed that in as-received samples, pitting attack only affected the α phase. Conversely, in aged samples, pitting and IGC attack were detected close to nitrides in correspondence of α/α and α/γ grain boundaries depending on aging temperatures and times.


RSC Advances ◽  
2016 ◽  
Vol 6 (112) ◽  
pp. 111261-111268 ◽  
Author(s):  
Gaofeng Han ◽  
Pengfei Jiang ◽  
Jianzhang Wang ◽  
Fengyuan Yan

Wear–corrosion behavior of SAF 2507 super duplex stainless steel (SDSS) in different concentrations of NaCl (from 0.5% to 8%, w/v) was investigated using a pin-on-disk tester.


Sign in / Sign up

Export Citation Format

Share Document