scholarly journals Tracking the Catalyst Layer Depth-Dependent Electrochemical Degradation of a Bimodal Pt/C Fuel Cell Catalyst: A Combined Operando Small- and Wide-Angle X-Ray Scattering Study

Author(s):  
Johanna Schröder ◽  
Rebecca K. Pittkowski ◽  
Isaac Martens ◽  
Raphaël Chattot ◽  
Jakub Drnec ◽  
...  

The combination of operando small- and wide-angle X-ray scattering (SAXS, WAXS) in grazing incidence configuration is presented as a new approach to provide depth-dependent insights into the changes in mean particle sizes and phase fractions occurring for fuel cell catalysts during accelerated stress tests (ASTs). As fuel cell catalyst, a bimodal Pt/C catalyst was chosen that consists of two distinguishable particle size populations. The presence of the two different sizes should favor and uncover electrochemical Ostwald ripening as the major degradation mechanism, i.e., it is expected that the size of the larger particles in the Pt/C catalyst grows at the expense of the smaller particles. The grazing incidence mode performed at the European Synchrotron Radiation Facility (ESRF) at the ID31 beamline revealed an intertwinement of the depth dependent degradation. While the larger particles show the same particle size changes close to the electrolyte-catalyst interface and within the catalyst layer, for the smaller Pt nanoparticles a different degradation scenario is observed. At the electrolyte-catalyst interface, the smaller particles increase in size while their phase fraction decreases during the AST. However, in the inner catalyst layer the phase fraction of smaller particles increases instead of decreases. The results of a depth-dependent degradation strongly suggest to employ a depth-dependent catalyst design for future improvement of the catalyst stability.

2021 ◽  
Author(s):  
Johanna Schröder ◽  
Rebecca K. Pittkowski ◽  
Isaac Martens ◽  
Raphaël Chattot ◽  
Jakub Drnec ◽  
...  

The combination of operando small- and wide-angle X-ray scattering (SAXS, WAXS) is here presented to provide insights into the changes in mean particle sizes and phase fractions in fuel cell catalyst layers during accelerated stress tests (ASTs). As fuel cell catalyst, a bimodal Pt/C catalyst was chosen that consists of two distinguishable particle size populations. The presence of the two different sizes should favor and uncover electrochemical Ostwald ripening as degradation mechanism, i.e., the growth of larger particles in the Pt/C catalyst at the expense of the smaller particles via the formation of ionic metal species. However, instead of electrochemical Ostwald ripening, the results point toward classical Ostwald ripening via the local diffusion of metal atoms on the support. Furthermore, the grazing incidence mode provides insights into the catalyst layer depth-dependent degradation. While the larger particles show the same particle size changes close to the electrolyte-catalyst interface and within the catalyst layer, the smaller Pt nanoparticles exhibit a slightly decreased size at the electrolyte-catalyst interface. During the AST, both size populations increase in size, independent of the depth. Their phase fraction, i.e., the ratio of smaller to larger size population, however, exhibits a depth-dependent behavior. While at the electrolyte-catalyst interface the phase fraction of the smaller size population decreases, it increases in the inner catalyst layer. The results of a depth-dependent degradation suggest that employing a depth-dependent catalyst design can be used for future improvement of catalyst stability.


2021 ◽  
Author(s):  
Johanna Schröder ◽  
Rebecca K. Pittkowski ◽  
Isaac Martens ◽  
Raphaël Chattot ◽  
Jakub Drnec ◽  
...  

The combination of operando small- and wide-angle X-ray scattering (SAXS, WAXS) is here presented to provide insights into the changes in mean particle sizes and phase fractions in fuel cell catalyst layers during accelerated stress tests (ASTs). As fuel cell catalyst, a bimodal Pt/C catalyst was chosen that consists of two distinguishable particle size populations. The presence of the two different sizes should favor and uncover electrochemical Ostwald ripening as degradation mechanism, i.e., the growth of larger particles in the Pt/C catalyst at the expense of the smaller particles via the formation of ionic metal species. However, instead of electrochemical Ostwald ripening, the results point toward classical Ostwald ripening via the local diffusion of metal atoms on the support. Furthermore, the grazing incidence mode provides insights into the catalyst layer depth-dependent degradation. While the larger particles show the same particle size changes close to the electrolyte-catalyst interface and within the catalyst layer, the smaller Pt nanoparticles exhibit a slightly decreased size at the electrolyte-catalyst interface. During the AST, both size populations increase in size, independent of the depth. Their phase fraction, i.e., the ratio of smaller to larger size population, however, exhibits a depth-dependent behavior. While at the electrolyte-catalyst interface the phase fraction of the smaller size population decreases, it increases in the inner catalyst layer. The results of a depth-dependent degradation suggest that employing a depth-dependent catalyst design can be used for future improvement of catalyst stability.


2006 ◽  
Vol 39 (6) ◽  
pp. 871-877 ◽  
Author(s):  
Ying-Huang Lai ◽  
Ya-Sen Sun ◽  
U-Ser Jeng ◽  
Jhih-Min Lin ◽  
Tsang-Lang Lin ◽  
...  

A SWAXS (small- and wide-angle X-ray scattering) instrument was recently installed at the wiggler beamline BL17B3 of the National Synchrotron Radiation Research Center (NSRRC), Taiwan. The instrument, which is designed for studies of static and dynamic nanostructures and correlations between the nano (ormeso) structure (SAXS) and crystalline structure (WAXS), provides a flux of 1010–1011photon s−1at the sample at energies between 5 and 14 keV. With a SAXS area detector and a WAXS linear detector connected to two data acquisition systems operated in master–slave mode, the instrument allows one to perform time-resolved as well as anomalous scattering measurements. Data reduction algorithms have been developed for rapid processing of the large SWAXS data sets collected during time-resolved measurements. The performance of the instrument is illustrated by examples taken from different classes of ongoing projects: (i) time-resolved SAXS/WAXS/differential scanning calorimetry (DSC) with a time resolution of 10 s on a semicrystalline poly(hexamethylene terephthalate) sample, (ii) anomalous SAXS/WAXS measurements on a nanoparticulate PtRu catalyst, and (iii) grazing-incidence SAXS of a monolayer of oriented semiconductor quantum wires, and humidity-controlled ordering of Alamethicin peptides embedded in an oriented lipid membrane.


2020 ◽  
Vol 53 (4) ◽  
pp. 1108-1129 ◽  
Author(s):  
Victoria Savikhin ◽  
Hans-Georg Steinrück ◽  
Ru-Ze Liang ◽  
Brian A. Collins ◽  
Stefan D. Oosterhout ◽  
...  

Grazing-incidence wide-angle X-ray scattering (GIWAXS) has become an increasingly popular technique for quantitative structural characterization and comparison of thin films. For this purpose, accurate intensity normalization and peak position determination are crucial. At present, few tools exist to estimate the uncertainties of these measurements. Here, a simulation package is introduced called GIWAXS-SIIRkit, where SIIR stands for scattering intensity, indexing and refraction. The package contains several tools that are freely available for download and can be executed in MATLAB. The package includes three functionalities: estimation of the relative scattering intensity and the corresponding uncertainty based on experimental setup and sample dimensions; extraction and indexing of peak positions to approximate the crystal structure of organic materials starting from calibrated GIWAXS patterns; and analysis of the effects of refraction on peak positions. Each tool is based on a graphical user interface and designed to have a short learning curve. A user guide is provided with detailed usage instruction, tips for adding functionality and customization, and exemplary files.


Sign in / Sign up

Export Citation Format

Share Document