scholarly journals From the Martian Surface to Its Low Orbit in a Reusable Single-Stage Vehicle—Charon

Aerospace ◽  
2021 ◽  
Vol 8 (6) ◽  
pp. 153
Author(s):  
Jérémie Gaffarel ◽  
Afrasiab Kadhum ◽  
Mohammad Fazaeli ◽  
Dimitrios Apostolidis ◽  
Menno Berger ◽  
...  

With Mars colonisation becoming a reality for the near future, it is of importance to analyse how crew and cargo can be transported between Earth and a colony on Mars. This article is a feasibility and design study of a launch vehicle whose mission is to shuttle crew and cargo from Low Mars Orbit to a colony on the Martian surface. A single-stage reusable rocket has been selected to fulfil this mission, code-named Charon. The mission profile of such a vehicle was created, leading to a Maximum Growth Allowance (MGA) Delta-V budget of 6.2 km/s. With the mission profile in mind, each subsystem underwent a preliminary design. With reliability and maintainability in mind, subsystems were designed for redundancy and modularity, and an abort system was included for an added level of safety. The iterative design process resulted in a vehicle with a MGA mass of 198.7 tons, capable of transporting 1200 kg of cargo and a crew of 6 people to a 500 km orbit and back. The preliminary design of the vehicle is deemed safe. Following a fault tree analysis, the Single Launch Loss of Mission, Vehicle and Crew (SL-LOM, SL-LOV, SL-LOC) probabilities are computed to be of 0.975%, 0.12%, and 0.079%. Finally, from the vehicle’s constraints on the base, the feasibility of the project has been reflected upon. It is deemed that such a concept is of high interest only when the base is already operational, due to the launch and maintenance infrastructure that it requires, as well as the power it requires from the Martian base.

2015 ◽  
Vol 26 (2) ◽  
pp. 192-198
Author(s):  
Yongshik Han ◽  
Kyu Hyung Do ◽  
Taehoon Kim ◽  
Myungbae Kim ◽  
Byungil Choi

Author(s):  
Kamal Hamid ◽  
Nadim Chahine

Wireless communications became one of the most widespread means for transferring information. Speed and reliability in transferring the piece of information are considered one of the most important requirements in communication systems in general. Moreover, Quality and reliability in any system are considered the most important criterion of the efficiency of this system in doing the task it is designed to do and its ability for satisfactory performance for a certain period of time, Therefore, we need fault tree analysis in these systems in order to determine how to detect an error or defect when happening in communication system and what are the possibilities that make this error happens. This research deals with studying TETRA system components, studying the physical layer in theory and practice, as well as studying fault tree analysis in this system, and later benefit from this study in proposing improvements to the structure of the system, which led to improve gain in Link Budget. A simulation and test have been done using MATLAB, where simulation results have shown that the built fault tree is able to detect the system’s work by 82.4%.


Sign in / Sign up

Export Citation Format

Share Document