scholarly journals Dynamic Modeling of the Dissipative Contact and Friction Forces of a Passive Biped-Walking Robot

2020 ◽  
Vol 10 (7) ◽  
pp. 2342 ◽  
Author(s):  
Eduardo Corral ◽  
M.J. Gómez García ◽  
Cristina Castejon ◽  
Jesús Meneses ◽  
Raúl Gismeros

This work presents and discusses a general approach for the dynamic modeling and analysis of a passive biped walking robot, with a particular focus on the feet-ground contact interaction. The main purpose of this investigation is to address the supporting foot slippage and viscoelastic dissipative contact forces of the biped robot-walking model and to develop its dynamics equations for simple and double support phases. For this investigation, special attention has been given to the detection of the contact/impact between the legs of the biped and the ground. The results have been obtained with multibody system dynamics applying forward dynamics. This study aims at examining and comparing several force models dealing with different approaches in the context of multibody system dynamics. The normal contact forces developed during the dynamic walking of the robot are evaluated using several models: Hertz, Kelvin-Voight, Hunt and Crossley, Lankarani and Nikravesh, and Flores. Thanks to this comparison, it was shown that the normal force that works best for this model is the dissipative Nonlinear Flores Contact Force Model (hysteresis damping parameter - energy dissipation). Likewise, the friction contact/impact problem is solved using the Bengisu equations. The numerical results reveal that the stable periodic solutions are robust. Integrators and resolution methods are also purchased, in order to obtain the most efficient ones for this model.

Mathematics ◽  
2021 ◽  
Vol 9 (12) ◽  
pp. 1359
Author(s):  
Eduardo Corral ◽  
Raúl Gismeros Gismeros Moreno ◽  
Jesús Meneses ◽  
María Jesús Gómez García ◽  
Cristina Castejón

In the present work, different algorithms for contact detection in multibody systems based on smooth contact modelling approaches are presented. Beginning with the simplest ones, some difficult interactions are subsequently introduced. In addition, a brief overview on the different kinds of contact/impact modelling is provided and an underlining of the advantages and the drawbacks of each of them is determined. Finally, some practical examples of each interaction are presented and analyzed and an outline of the issues arisen during the design process and how they have been solved in order to obtain stable and accurate results is given. The main goal of this paper is to provide a resource for the early-stage researchers in the field that serves as an introduction to the modelling of simple contact/impact events in the context of multibody system dynamics.


Robotica ◽  
2005 ◽  
Vol 24 (1) ◽  
pp. 31-37 ◽  
Author(s):  
Hyeung-Sik Choi ◽  
Yong-Heon Park

We developed a new type of a human-sized BWR (biped walking robot) driven by the closed-chain type of a joint actuator. Each leg of the BWR is composed of three pitch joints and one roll joint. In all, a 12 degree-of-freedom robot, including four arm joints, was developed. The BWR was designed to walk autonomously; it is actuated by small 90W DC motors/drivers and is has DC batteries and controllers. A new type of the joint actuator for the BWR is composed of the four-bar-link mechanism driven by a ball screw which has high strength and high gear ratio despite its light weight.In this paper, analyses on the four-bar-link mechanism applied to the joint actuator and on the structure of the BWR are presented. Through walking experiments of the BWR, the superior trajectory-tracking ability of the proposed joint actuator is validated.


Sign in / Sign up

Export Citation Format

Share Document