scholarly journals Observing System Simulation Experiment to Reproduce Kelvin Wave in the Venus Atmosphere

Atmosphere ◽  
2020 ◽  
Vol 12 (1) ◽  
pp. 14
Author(s):  
Norihiko Sugimoto ◽  
Yukiko Fujisawa ◽  
Mimo Shirasaka ◽  
Asako Hosono ◽  
Mirai Abe ◽  
...  
Keyword(s):  
Data Assimilation ◽  
Wind Velocity ◽  
General Circulation ◽  
Simulation Experiment ◽  
System Simulation ◽  
General Circulation Models ◽  
Horizontal Wind ◽  
Planetary Scale ◽  
Observing System Simulation Experiment ◽  
Venus Atmosphere

Planetary-scale 4-day Kelvin-type waves at the cloud top of the Venus atmosphere have been reported from the 1980s, and their significance for atmospheric dynamics has been pointed out. However, these waves have not been reproduced in Venus atmospheric general circulation models (VGCMs). Recently, horizontal winds associated with the planetary-scale waves at the cloud top have been obtained from cloud images taken by cameras onboard Venus orbiters, which could enable us to clarify the structure and roles of Kelvin-type waves. In order to examine this possibility, our team carried out an idealized observing system simulation experiment (OSSE) with a data assimilation system which we developed. The wind velocity data provided by a CCSR/NIES (Center for Climate System Research/National Institute for Environmental Studies) VGCM where equatorial Kelvin-type waves were assumed below the cloud bottom was used as idealized observations. Results show that 4-day planetary-scale Kelvin-type waves are successfully reproduced if the wind velocity between 15° S and 15° N latitudes is assimilated every 6 h at 70 km altitude. It is strongly suggested that the Kelvin-type waves could be reproduced and investigated by the data assimilation with the horizontal wind data derived from Akatsuki ultraviolet images. The present results also contribute to planning future missions for understanding planetary atmospheres.

A Hybrid ETKF–3DVAR Data Assimilation Scheme for the WRF Model. Part I: Observing System Simulation Experiment

2008 ◽  
Vol 136 (12) ◽  
pp. 5116-5131 ◽  
Author(s):  
Xuguang Wang ◽  
Dale M. Barker ◽  
Chris Snyder ◽  
Thomas M. Hamill
Keyword(s):  
Data Assimilation ◽  
Simulation Experiment ◽  
Forecast Error ◽  
System Simulation ◽  
Wrf Model ◽  
Error Statistics ◽  
Model Assumption ◽  
Perfect Model ◽  
Variational Minimization ◽  
Observing System Simulation Experiment

Abstract A hybrid ensemble transform Kalman filter–three-dimensional variational data assimilation (ETKF–3DVAR) system for the Weather Research and Forecasting (WRF) Model is introduced. The system is based on the existing WRF 3DVAR. Unlike WRF 3DVAR, which utilizes a simple, static covariance model to estimate the forecast-error statistics, the hybrid system combines ensemble covariances with the static covariances to estimate the complex, flow-dependent forecast-error statistics. Ensemble covariances are incorporated by using the extended control variable method during the variational minimization. The ensemble perturbations are maintained by the computationally efficient ETKF. As an initial attempt to test and understand the newly developed system, both an observing system simulation experiment under the perfect model assumption (Part I) and the real observation experiment (Part II) were conducted. In these pilot studies, the WRF was run over the North America domain at a coarse grid spacing (200 km) to emphasize synoptic scales, owing to limited computational resources and the large number of experiments conducted. In Part I, simulated radiosonde wind and temperature observations were assimilated. The results demonstrated that the hybrid data assimilation method provided more accurate analyses than the 3DVAR. The horizontal distributions of the errors demonstrated the hybrid analyses had larger improvements over data-sparse regions than over data-dense regions. It was also found that the ETKF ensemble spread in general agreed with the root-mean-square background forecast error for both the first- and second-order measures. Given the coarse resolution, relatively sparse observation network, and perfect model assumption adopted in this part of the study, caution is warranted when extrapolating the results to operational applications.

scholarly journals The SPRINTARS version 3.80/4D-Var data assimilation system: development and inversion experiments based on the observing system simulation experiment framework

2013 ◽  
Vol 6 (6) ◽  
pp. 2005-2022 ◽  
Author(s):  
K. Yumimoto ◽  
T. Takemura
Keyword(s):  
Data Assimilation ◽  
Simulation Experiment ◽  
System Simulation ◽  
Inverse Modelling ◽  
Computational Time ◽  
Adjoint Model ◽  
Aerosol Emissions ◽  
Observing System Simulation Experiment ◽  
Data Assimilation System ◽  
Assimilation System

Abstract. We present an aerosol data assimilation system based on a global aerosol climate model (SPRINTARS – Spectral Radiation-Transport Model for Aerosol Species) and a four-dimensional variational data assimilation method (4D-Var). Its main purposes are to optimize emission estimates, improve composites, and obtain the best estimate of the radiative effects of aerosols in conjunction with observations. To reduce the huge computational cost caused by the iterative integrations in the models, we developed an offline model and a corresponding adjoint model, which are driven by pre-calculated meteorological, land, and soil data. The offline and adjoint model shortened the computational time of the inner loop by more than 30%. By comparing the results with a 1 yr simulation from the original online model, the consistency of the offline model was verified, with correlation coefficient R > 0.97 and absolute value of normalized mean bias NMB < 7% for the natural aerosol emissions and aerosol optical thickness (AOT) of individual aerosol species. Deviations between the offline and original online models are mainly associated with the time interpolation of the input meteorological variables in the offline model; the smaller variability and difference in the wind velocity near the surface and relative humidity cause negative and positive biases in the wind-blown aerosol emissions and AOTs of hygroscopic aerosols, respectively. The feasibility and capability of the developed system for aerosol inverse modelling was demonstrated in several inversion experiments based on the observing system simulation experiment framework. In the experiments, we used the simulated observation data sets of fine- and coarse-mode AOTs from sun-synchronous polar orbits to investigate the impact of the observational frequency (number of satellites) and coverage (land and ocean), and assigned aerosol emissions to control parameters. Observations over land have a notably positive impact on the performance of inverse modelling as compared with observations over ocean, implying that reliable observational information over land is important for inverse modelling of land-born aerosols. The experimental results also indicate that information that provides differentiations between aerosol species is crucial to inverse modelling over regions where various aerosol species coexist (e.g. industrialized regions and areas downwind of them).

scholarly journals An Observing System Simulation Experiment for the Impact of MTG Candidate Infrared Sounding Mission on Regional Forecasts: System Development and Preliminary Results

2013 ◽  
Vol 2013 ◽  
pp. 1-18 ◽  
Author(s):  
Hongli Wang ◽  
Xiang-Yu Huang ◽  
Yongsheng Chen
Keyword(s):  
Simulation Experiment ◽  
Positive Impact ◽  
System Simulation ◽  
Wrf Model ◽  
Precipitation Forecast ◽  
Horizontal Wind ◽  
Error Statistics ◽  
Regional Forecasts ◽  
Observing System Simulation Experiment ◽  
The Impact

An Observing System Simulation Experiment (OSSE) was designed and developed to assess the potential benefit of the Infrared Sounding on the Meteosat Third Generation (MTG-IRS) geostationary meteorological satellite system to regional forecasts. In the proposed OSSE framework, two different models, namely, the MM5 and WRF models, were used in a nature run and data assimilation experiments, respectively, to reduce the identical twin problem. The 5-day nature run, which included three convective storms that occurred during the period from 11 to 16 June 2002 over US Great Plains, was generated using MM5 with a 4 km. The simulated “conventional” observations and MTG-IRS retrieved temperature and humidity profiles, produced from the nature run, were then assimilated into the WRF model. Calibration experiments showed that assimilating real or simulated “conventional” observations yielded similar error statistics in analyses and forecasts, indicating that the developed OSSE system worked well. On average, the MTG-IRS retrieved profiles had positive impact on the analyses and forecasts. The analyses reduced the errors not only in the temperature and the humidity fields but in the horizontal wind fields as well. The forecast skills of these variables were improved up to 12 hours. The 18 h precipitation forecast accuracy was also increased.

Balanced Ocean-Data Assimilation near the Equator

2002 ◽  
Vol 32 (9) ◽  
pp. 2509-2519 ◽  
Author(s):  
Gerrit Burgers ◽  
Magdalena A. Balmaseda ◽  
Femke C. Vossepoel ◽  
Geert Jan van Oldenborgh ◽  
Peter Jan van Leeuwen
Keyword(s):  
Data Assimilation ◽  
Shallow Water ◽  
General Circulation ◽  
General Circulation Models ◽  
Density Field ◽  
Water Model ◽  
Optimal Interpolation ◽  
Shallow Water Model ◽  
Ocean Data Assimilation ◽  
Zonal Velocity

Abstract The question is addressed whether using unbalanced updates in ocean-data assimilation schemes for seasonal forecasting systems can result in a relatively poor simulation of zonal currents. An assimilation scheme, where temperature observations are used for updating only the density field, is compared to a scheme where updates of density field and zonal velocities are related by geostrophic balance. This is done for an equatorial linear shallow-water model. It is found that equatorial zonal velocities can be detoriated if velocity is not updated in the assimilation procedure. Adding balanced updates to the zonal velocity is shown to be a simple remedy for the shallow-water model. Next, optimal interpolation (OI) schemes with balanced updates of the zonal velocity are implemented in two ocean general circulation models. First tests indicate a beneficial impact on equatorial upper-ocean zonal currents.

Sign in / Sign up

Export Citation Format

Share Document