scholarly journals Dynamic Effective Elasticity of Melanoma Cells under Shear and Elongational Flow Confirms Estimation from Force Spectroscopy

Biophysica ◽  
2021 ◽  
Vol 1 (4) ◽  
pp. 445-457
Author(s):  
Anna Martina Jötten ◽  
Simon V. Neidinger ◽  
Julia K. Tietze ◽  
Julia Welzel ◽  
Christoph Westerhausen
Keyword(s):  
High Speed ◽  
Three Dimensional ◽  
Force Spectroscopy ◽  
Elongational Flow ◽  
Biomechanical Properties ◽  
Melanoma Cells ◽  
Spatial Inhomogeneity ◽  
Elastic Behavior ◽  
Deformation Analysis ◽  
Strain Diagram

The detection and enrichment of circulating melanoma cells is a challenge, as the cells are very heterogeneous in terms of their biomechanical properties and surface markers. In addition, there is a lack of valid and reliable biomarkers predicting progress and therapeutic response. In this study, we analyze the elasticity of A375 melanoma cells by applying force spectroscopy and a microfluidic method. To identify and eventually separate freely circulating tumor cells, it is crucial to know their physical properties precisely. First, we use standard AFM force spectroscopy, where the elasticity of the cells is calculated from indentation with a pyramidal tip. To extend the limits of the measurements with a tip, we then use cantilevers without a tip to apply force over a larger area of the cells. The resulting Young’s moduli are slightly lower and vary less without the tip, presumably because of the spatial inhomogeneity of the cells. Finally, we implement our microfluidic method: we measure single cell elasticity by analyzing their deformation in high-speed micrographs while passing a stenosis. Combining the force field and the change in shape provides the basis for a stress–strain diagram. The results from the microfluidic deformation analysis were well in accordance with the results from force spectroscopy. The microfluidic method, however, provides advantages over conventional methods, as it is less invasive and less likely to harm the cell during the measurement. The whole cell is measured as one entity without having contact to a stiff substrate, while force spectroscopy is limited to the contact area of the tip, and in some cases dependent of the cell substrate interaction. Consequently, microfluidic deformation analysis allows us to predict the overall elastic behavior of the whole, inhomogeneous cell in three-dimensional force fields. This method may contribute to improve the detection of circulating melanoma cells in the clinical practice.

scholarly journals Dynamic Effective Elasticity of Melanoma Cells Under Shear and Elongational Flow Confirms Estimation From Force Spectroscopy

2021 ◽  
Author(s):  
Anna Martina Jötten ◽  
Simon Neidinger ◽  
Julia K. Tietze ◽  
Julia Welzel ◽  
Christoph Westerhausen
Keyword(s):  
High Speed ◽  
Three Dimensional ◽  
Force Spectroscopy ◽  
Elongational Flow ◽  
Biomechanical Properties ◽  
Melanoma Cells ◽  
Elastic Behavior ◽  
Deformation Analysis ◽  
Strain Diagram ◽  
Large Area

The detection and enrichment of circulating melanoma cells is a challenge as the cells are very heterogeneous in terms of their biomechanical properties and surface markers. In addition, there is a lack of valid and reliable biomarkers that predict progress and therapeutic response. We here analyzed the elasticity of A375 melanoma cells applying force spectroscopy and a microfluidic method. To identify and eventually separate circulating tumor cells, it is crucial to precisely know their physical properties. First, we used standard AFM force spectroscopy, where the elasticity of the cells is calculated from indentation with a pyramidal tip. To extend the limits of measurement with a tip, we then used cantilevers without a tip to press on the cells over a large area. The resulting Young’s moduli are slightly lower and vary less without tip presumably because of the inhomogeneity of the cells. Finally, we implemented our microfluidic method. We measured single cell elasticity by analyzing its deformation in high-speed micrographs while passing a stenosis. Combining the force field and the change in shape provides the basis for a stress strain diagram. The results from microfluidic deformation analysis were in accordance with the results from force spectroscopy. The microfluidic method provides advantages over conventional methods, since it is less invasive and less likely to harm the cell during the measurement, and the whole cell is measured as one entity without contact to a stiff substrate, while force spectroscopy is limited to the contact area of the tip, and in some cases dependent of the cell substrate interaction. Consequently, microfluidic deformation analysis allows to predict the overall elastic behavior of the whole inhomogeneous cell in three-dimensional force fields. This method may contribute to improve the detection of circulation melanoma cells in the clinical practice.

A Novel Method for Optical High Spatiotemporal Strain Analysis for Transcatheter Aortic Valves In Vitro

2016 ◽  
Vol 138 (3) ◽  
Author(s):  
Simon Heide-Jørgensen ◽  
Sellaswasmy Kumaran Krishna ◽  
Jonas Taborsky ◽  
Tommy Bechsgaard ◽  
Rachid Zegdi ◽  
...  
Keyword(s):  
High Speed ◽  
Three Dimensional ◽  
Strain Analysis ◽  
Image Correlation ◽  
Deformation Analysis ◽  
Flow Loop ◽  
Transcatheter Aortic Valve ◽  
Wear And Tear ◽  
Valve Implantation

The transcatheter aortic valve implantation (TAVI) valve is a bioprosthetic valve within a metal stent frame. Like traditional surgical bioprosthetic valves, the TAVI valve leaflet tissue is expected to calcify and degrade over time. However, clinical studies of TAVI valve longevity are still limited. In order to indirectly assess the longevity of TAVI valves, an estimate of the mechanical wear and tear in terms of valvular deformation and strain of the leaflets under various conditions is warranted. The aim of this study was, therefore, to develop a platform for noncontact TAVI valve deformation analysis with both high temporal and spatial resolutions based on stereophotogrammetry and digital image correlation (DIC). A left-heart pulsatile in vitro flow loop system for mounting of TAVI valves was designed. The system enabled high-resolution imaging of all three TAVI valve leaflets simultaneously for up to 2000 frames per second through two high-speed cameras allowing three-dimensional analyses. A coating technique for applying a stochastic pattern on the leaflets of the TAVI valve was developed. The technique allowed a pattern recognition software to apply frame-by-frame cross correlation based deformation measurements from which the leaflet motions and the strain fields were derived. The spatiotemporal development of a very detailed strain field was obtained with a 0.5 ms time resolution and a spatial resolution of 72 μm/pixel. Hence, a platform offering a new and enhanced supplementary experimental evaluation of tissue valves during various conditions in vitro is presented.

Temperature Field Modeling and Thermal Deformation Analysis of Turning and Milling Machining Center

2011 ◽  
Vol 189-193 ◽  
pp. 1986-1990
Author(s):  
De Ping Liu ◽  
Jie Li ◽  
Yu Feng Su ◽  
Yu Ping Wang
Keyword(s):  
Temperature Field ◽  
Machine Tool ◽  
High Speed ◽  
Thermal Deformation ◽  
Three Dimensional ◽  
Thermal Error ◽  
Mathematic Model ◽  
Deformation Analysis ◽  
Machining Center ◽  
Steady State Temperature

Taking the high-speed CX series vertical milling compound machining center of CX8075 produced by Anyang Xinsheng Machine Tool Co., Ltd. as example, the machine three-dimensional simplified model is established, the source of the heat and the distribution of the important hot-points are analyzed, the machine temperature field distribution is derived which lays a foundation for the thermal error compensation. Taking into account the moving part-saddle of the machining center, its mathematic model is obtained, the important hot-points are studied, the thermodynamic parameters are determined. Based on ANSYS finite element method, the steady-state temperature field and the thermal deformation of saddle are presented, the optimal design of high-speed and high-accuracy machine tool is doned and its thermal deformation analysis is realized.

High-speed brightfield 3-D imaging and 3-D image analysis of thick and overlapped cell clusters in cytological preparations

1994 ◽  
Vol 52 ◽  
pp. 218-219
Author(s):  
Robert W. Mackin
Keyword(s):  
Image Analysis ◽  
High Speed ◽  
Three Dimensional ◽  
Image Data ◽  
Ccd Camera ◽  
Objective Lens ◽  
Array Processor ◽  
Vaginal Smears ◽  
Low Contrast ◽  
Computer Controlled

This paper presents two advances towards the automated three-dimensional (3-D) analysis of thick and heavily-overlapped regions in cytological preparations such as cervical/vaginal smears. First, a high speed 3-D brightfield microscope has been developed, allowing the acquisition of image data at speeds approaching 30 optical slices per second. Second, algorithms have been developed to detect and segment nuclei in spite of the extremely high image variability and low contrast typical of such regions. The analysis of such regions is inherently a 3-D problem that cannot be solved reliably with conventional 2-D imaging and image analysis methods.High-Speed 3-D imaging of the specimen is accomplished by moving the specimen axially relative to the objective lens of a standard microscope (Zeiss) at a speed of 30 steps per second, where the stepsize is adjustable from 0.2 - 5μm. The specimen is mounted on a computer-controlled, piezoelectric microstage (Burleigh PZS-100, 68/μm displacement). At each step, an optical slice is acquired using a CCD camera (SONY XC-11/71 IP, Dalsa CA-D1-0256, and CA-D2-0512 have been used) connected to a 4-node array processor system based on the Intel i860 chip.

Effects of Three-Dimensional Pressure Gradients on High-Speed Turbulent Boundary Layers

2021 ◽  
Author(s):  
Scott J. Peltier ◽  
Brian E. Rice ◽  
Ethan Johnson ◽  
Venkateswaran Narayanaswamy ◽  
Marvin E. Sellers
Keyword(s):  
Boundary Layers ◽  
High Speed ◽  
Three Dimensional ◽  
Turbulent Boundary Layers ◽  
Pressure Gradients

Three-Dimensional Imaging through Shock-Waves at Ultra-High Speed.

2018 ◽  
Author(s):  
Yi Chen Mazumdar ◽  
Michael E. Smyser ◽  
Jeffery Dean Heyborne ◽  
Daniel Robert Guildenbecher
Keyword(s):  
Shock Waves ◽  
High Speed ◽  
Three Dimensional ◽  
Three Dimensional Imaging ◽  
Ultra High Speed

scholarly journals High-speed volumetric two-photon fluorescence imaging of neurovascular dynamics

2020 ◽  
Vol 11 (1) ◽  
Author(s):  
Jiang Lan Fan ◽  
Jose A. Rivera ◽  
Wei Sun ◽  
John Peterson ◽  
Henry Haeberle ◽  
...  
Keyword(s):  
Blood Flow ◽  
High Speed ◽  
Laser Scanning ◽  
Three Dimensional ◽  
Laser Scanning Microscopy ◽  
Fluorescence Signal ◽  
Imaging Method ◽  
Spatiotemporal Resolution ◽  
Two Photon

AbstractUnderstanding the structure and function of vasculature in the brain requires us to monitor distributed hemodynamics at high spatial and temporal resolution in three-dimensional (3D) volumes in vivo. Currently, a volumetric vasculature imaging method with sub-capillary spatial resolution and blood flow-resolving speed is lacking. Here, using two-photon laser scanning microscopy (TPLSM) with an axially extended Bessel focus, we capture volumetric hemodynamics in the awake mouse brain at a spatiotemporal resolution sufficient for measuring capillary size and blood flow. With Bessel TPLSM, the fluorescence signal of a vessel becomes proportional to its size, which enables convenient intensity-based analysis of vessel dilation and constriction dynamics in large volumes. We observe entrainment of vasodilation and vasoconstriction with pupil diameter and measure 3D blood flow at 99 volumes/second. Demonstrating high-throughput monitoring of hemodynamics in the awake brain, we expect Bessel TPLSM to make broad impacts on neurovasculature research.

scholarly journals Prevention of Mountain Disasters and Maintenance of Residential Area through Real-Time Terrain Rendering

2021 ◽  
Vol 13 (5) ◽  
pp. 2950
Author(s):  
Su-Kyung Sung ◽  
Eun-Seok Lee ◽  
Byeong-Seok Shin
Keyword(s):  
Real Time ◽  
Graphics Processing Units ◽  
High Speed ◽  
Large Scale ◽  
Civil Engineering ◽  
Three Dimensional ◽  
Sampled Data ◽  
Residential Areas ◽  
Terrain Rendering ◽  
Mountain Disasters

Climate change increases the frequency of localized heavy rains and typhoons. As a result, mountain disasters, such as landslides and earthworks, continue to occur, causing damage to roads and residential areas downstream. Moreover, large-scale civil engineering works, including dam construction, cause rapid changes in the terrain, which harm the stability of residential areas. Disasters, such as landslides and earthenware, occur extensively, and there are limitations in the field of investigation; thus, there are many studies being conducted to model terrain geometrically and to observe changes in terrain according to external factors. However, conventional topography methods are expressed in a way that can only be interpreted by people with specialized knowledge. Therefore, there is a lack of consideration for three-dimensional visualization that helps non-experts understand. We need a way to express changes in terrain in real time and to make it intuitive for non-experts to understand. In conventional height-based terrain modeling and simulation, there is a problem in which some of the sampled data are irregularly distorted and do not show the exact terrain shape. The proposed method utilizes a hierarchical vertex cohesion map to correct inaccurately modeled terrain caused by uniform height sampling, and to compensate for geometric errors using Hausdorff distances, while not considering only the elevation difference of the terrain. The mesh reconstruction, which triangulates the three-vertex placed at each location and makes it the smallest unit of 3D model data, can be done at high speed on graphics processing units (GPUs). Our experiments confirm that it is possible to express changes in terrain accurately and quickly compared with existing methods. These functions can improve the sustainability of residential spaces by predicting the damage caused by mountainous disasters or civil engineering works around the city and make it easy for non-experts to understand.

Sign in / Sign up

Export Citation Format

Share Document