scholarly journals Flexural Behavior of Reinforced Concrete Slabs Reinforced with Innovative Hybrid Reinforcement of Geogrids and Steel Bars

Buildings ◽  
2020 ◽  
Vol 10 (9) ◽  
pp. 161
Author(s):  
Ramy Nasr Abdelmonem Mohamed ◽  
A.M. El Sebai ◽  
Ahmed Shaban Abdel-Hay Gabr
Keyword(s):  
Reinforced Concrete ◽  
Peak Load ◽  
Absorption Capacity ◽  
Flexural Behavior ◽  
Concrete Slabs ◽  
Displacement Ductility ◽  
Reinforcement System ◽  
Reinforced Concrete Slabs ◽  
Steel Bars ◽  
Hybrid Reinforcement

This paper aims to innovate a hybrid reinforcement system for concrete slabs, consisting of geogrids and steel bars, by conducting an experimental comparative study between using different types, tensile strengths, and layers of geogrids as additional reinforcement to steel bars in comparison to conventional steel-reinforced concrete control slab. These concrete slabs were tested under a four-point loading system until they failed due to bending. As an addition, strain gauges were attached to the concrete slabs bottom reinforcement (geogrids and steel bars) to provide a close examination of geogrids and steel bars as a hybrid reinforcement system. Results show that the innovated hybrid reinforcement system of uniaxial geogrids and steel bars more preferred as concrete slabs reinforcement as it provided more benefits values (including, but not limited to, initial-peak load, steel-yield load, post-peak load, displacement ductility index, and energy absorption capacity) and more efficient utilization (including, but not limited to, higher benefits to cost values and better flexural performance) than the case of using conventional reinforcement of steel bars and the cases of using triaxial geogrids as additional reinforcement to the steel bars; however, triaxial geogrids provide lower deflection values and higher first-crack load values.

scholarly journals Experimental study on flexural behavior of GFRP reinforced concrete slabs

2021 ◽  
Vol 676 (1) ◽  
pp. 012060
Author(s):  
Sun Li-xiang ◽  
Lin Peng-zhen ◽  
Yang Zi-jiang ◽  
Liu Ying-long ◽  
Shen Qu
Keyword(s):  
Experimental Study ◽  
Reinforced Concrete ◽  
Flexural Behavior ◽  
Concrete Slabs ◽  
Reinforced Concrete Slabs

scholarly journals Investigation on Structural Behavior of Bamboo Reinforced Concrete Slabs under Concentrated Load

2021 ◽  
Vol 50 (1) ◽  
pp. 227-238
Author(s):  
Yanuar Haryanto ◽  
Nanang Gunawan Wariyatno ◽  
Hsuan-Teh Hu ◽  
Ay Lie Han ◽  
Banu Ardi Hidayat
Keyword(s):  
Reinforced Concrete ◽  
Concrete Slab ◽  
Absorption Capacity ◽  
Concrete Slabs ◽  
Structural Behaviour ◽  
Reinforced Concrete Slab ◽  
Concentrated Load ◽  
Steel Reinforced Concrete ◽  
Reinforced Concrete Slabs ◽  
Cracking Pattern

Reinforced concrete is perhaps the most widely used building material in the world. However, the materials used for reinforcement of concrete i.e. steel is quite expensive and scarcely available in the developing world. As a result, bamboo is considered to be a cheaper replacement with high tensile strength. This research investigated the structural behaviour of bamboo-reinforced concrete slabs used for footplate foundation subjected to concentrated load. For this purpose, four different reinforced concrete slab panels were developed and analyzed. The influence of replacing steel with bamboo for the reinforcement of concrete slabs on their structural behaviour was assessed by determining the load-deflection characteristics, the ultimate load, the stiffness, the ductility, the cracking pattern, and the energy absorption capacity. The results showed that in comparison to steel reinforced concrete slabs, the strength of 82% can be acquired by the bamboo reinforced slabs. Furthermore, ductility demonstrated by the two types of specimens was almost equivalent i.e. up to 93%. Those indicated that the structural behaviour demonstrated by bamboo reinforced slabs is quite comparable to that of steel reinforced concrete slabs. Therefore, bamboo can prove to be a promising substitute for steel in concrete reinforcement. Future studies may further examine this opportunity.

scholarly journals Ductility Estimation of Concrete Beams Longitudinally Reinforced with Hybrid FRP-Steel Bars

2022 ◽  
Author(s):  
Rendy Thamrin ◽  
Zaidir Zaidir ◽  
Devitasari Iwanda
Keyword(s):  
Reinforced Concrete ◽  
Concrete Beams ◽  
Element Model ◽  
Neutral Axis ◽  
Reinforced Concrete Beams ◽  
Flexural Behavior ◽  
Bending Test ◽  
Longitudinal Reinforcement ◽  
Steel Bars ◽  
Hybrid Reinforcement

An experimental study was carried out to evaluate the ductility of reinforced concrete beams longitudinally reinforced with hybrid FRP-Steel bars. The specimens were fourteen reinforced concrete beams with and without hybrid reinforcement. The test variables were bars position, the ratio of longitudinal reinforcement, and the type of FRP bars. The beams were loaded up to failure using a four-point bending test. The performance of the tested beams was observed using the load-deflection curve obtained from the test. Numerical analysis using the fiber element model was used to examine the growth of neutral axis depth due to the effect of test variables. The neutral axis curves were then used to further estimate the neutral axis angle and neutral axis displacement index. The test results show that the position of the reinforcement greatly influences the flexural behavior of the beam with hybrid reinforcement. It was observed from the test that the flexural capacity of beams with hybrid reinforcement is 4% to 50% higher than that of the beams with conventional steel bars depending on bars position and the ratio of longitudinal reinforcement. The ductility decreases as the hybrid reinforcement ratio (Af/As) increases. This study also showed that a numerical model developed can predict the flexural behavior of beams with hybrid reinforcement with reasonable accuracy.

Flexural behavior of sustainable reactive powder concrete bubbled slab flooring elements

2017 ◽  
Vol 3 (2) ◽  
pp. 81 ◽  
Author(s):  
Ashraf Abdulhadi Alfeehan ◽  
Hassan Issa Abdulkareem ◽  
Shahad Hameed Mutashar
Keyword(s):  
Reinforced Concrete ◽  
Ultimate Load ◽  
Steel Fibers ◽  
Flexural Behavior ◽  
Reactive Powder Concrete ◽  
Concrete Slabs ◽  
Concrete Floor ◽  
Reinforced Concrete Slabs ◽  
Reactive Powder ◽  
Floor System

Voided slabs are reinforced concrete slabs in which voids allow to reduce the amount of concrete. The bubbled deck slab is a new and sustainable biaxial floor system to be used as a self-supporting concrete floor. The use of voided slabs leads to decrease the consumption of materials and improve the insulation properties for enhancing the objectives of sustainability. This study presents an investigation into the flexural behavior of sustainable Reactive Powder Concrete RPC bubbled slab flooring elements. Six one-way slabs were cast and tested up to the failure. The adopted variables in this study are: the volumetric ratio of steel fibers, type of slab; bubbled or solid, placing of reinforcement and thickness of slab. The effect of each variable on the ultimate load, deflection and strain has been discussed. The results show that increasing the percent of steel fibers from 1% to 2% in solid and bubbled slabs decreases the deflection by (18.75%) and (50%) respectively. As well as, the deflection increases by (41%) for bubbled slab compared to the solid slab. The slabs reinforced with top and bottom steel meshes show less deflection than slabs reinforced by only bottom steel mesh.

scholarly journals Flexural Behavior Performance of Reinforced Concrete Slabs Mixed with Nano- and Microsilica

2021 ◽  
Vol 2021 ◽  
pp. 1-11
Author(s):  
Rakesh Kancharla ◽  
Venkata Rao Maddumala ◽  
T. V. N. Prasanna ◽  
Lokaiah Pullagura ◽  
Ratna Raju Mukiri ◽  
...  
Keyword(s):  
Reinforced Concrete ◽  
High Performance ◽  
High Performance Concrete ◽  
High Strength ◽  
Flexural Behavior ◽  
Concrete Slabs ◽  
The Past ◽  
Reinforced Concrete Slabs ◽  
Concrete Mix ◽  
Bending Behavior

Present technology has been evaluated greatly over the past decades, where new particles are being designed and fabricated to fulfill specific needs. The field of nano- and micromaterials has prospered in many disciplines. It has been recently used in reinforced concrete in the production of high-strength, high-performance concrete. Microsilica (MS) and nanosilica (NS) particles have proven to be highly profitable to the concrete mix. Concrete has become denser with considerable improvement in their mechanical characteristics, particularly compressive strength. This proposed method includes a comparative study of the flexural bending behavior of conventional reinforced concrete (without MS or NS) slabs with other slabs. Each has various mixes of MS and NS particles incorporated into the concrete mix. The material content utilized in the slabs is kept constant by replacing a portion of the cement with an equivalent amount of either NS or MS particles or both. MS particles are altered from 0, 5, and 10% while NS particles are altered from 0, 0.5, and 1.0%. It cracks the widths and has higher final load-bearing capacity.

Sign in / Sign up

Export Citation Format

Share Document