scholarly journals Rapid Voltammetric Screening Method for the Assessment of Bioflavonoid Content Using the Disposable Bare Pencil Graphite Electrode

Chemosensors ◽  
2021 ◽  
Vol 9 (11) ◽  
pp. 323
Author(s):  
Iulia Gabriela David ◽  
Nimet Numan ◽  
Mihaela Buleandră ◽  
Dana-Elena Popa ◽  
Simona Carmen Lițescu ◽  
...  
Keyword(s):  
Electrochemical Behavior ◽  
Graphite Electrode ◽  
Supporting Electrolyte ◽  
Screening Method ◽  
Stripping Voltammetry ◽  
Differential Pulse ◽  
Pencil Graphite Electrode ◽  
Hydroxyl Groups ◽  
Reduction Peak ◽  
Solution Stability

Hesperidin (HESP) is a plant bioflavonoid found in various nutritional and medicinal products. Many of its multiple health benefits rely on the compound’s antioxidant ability, which is due to the presence of oxidizable hydroxyl groups in its structure. Therefore, the present study aimed to investigate the electrochemical behavior of HESP at a cheap, disposable pencil graphite electrode (PGE) in order to develop rapid and simple voltammetric methods for its quantification. Cyclic voltammetric investigations emphasized a complex electrochemical behavior of HESP. The influence of the electrode material, solution stability, supporting electrolyte pH, and nature were examined. HESP main irreversible, diffusion-controlled oxidation signal obtained at H type PGE in Britton Robinson buffer pH 1.81 was exploited for the development of a differential pulse voltammetry (DPV) quantitative analysis method. The quasi-reversible, adsorption-controlled reduction peak was used for HESP quantification by differential pulse adsorptive stripping voltammetry (DPAdSV). The linear ranges of DPV and DPAdSV were 1.00 × 10−7–1.20 × 10−5 and 5.00 × 10−8–1.00 × 10−6 mol/L with detection limits of 8.58 × 10−8 and 1.90 × 10−8 mol/L HESP, respectively. The DPV method was applied for the assessment of dietary supplements bioflavonoid content, expressed as mg HESP.

scholarly journals Disposable Pencil Graphite Electrode for Diosmin Voltammetric Analysis

Micromachines ◽  
2021 ◽  
Vol 12 (4) ◽  
pp. 351
Author(s):  
Iulia Gabriela David ◽  
Alexandra-Gabriela Oancea ◽  
Mihaela Buleandră ◽  
Dana Elena Popa ◽  
Emilia Elena Iorgulescu ◽  
...  
Keyword(s):  
Graphite Electrode ◽  
Cost Effective ◽  
Differential Pulse ◽  
Pencil Graphite Electrode ◽  
Hydroxyl Groups ◽  
Voltammetric Analysis ◽  
Electrode Processes ◽  
Beneficial Effects ◽  
Reversible Redox ◽  
Voltammetric Behavior

Diosmin (DIO) is a naturally occurring flavonoid with multiple beneficial effects on human health. The presence of different hydroxyl groups in diosmin structure enables its electrochemical investigation and quantification. This work presents, for the first time, diosmin voltammetric behavior and quantification on the cost-effective, disposable pencil graphite electrode (PGE). Diosmin oxidation on PGE involves two irreversible steps, generating products with reversible redox behaviors. All electrode processes are pH-dependent and predominantly adsorption-controlled. Differential pulse (DPV) and adsorptive stripping differential pulse (AdSDPV) voltammetric methods have been optimized for diosmin quantification o an H-type PGE, in 0.100 mol/L H2SO4. The linear ranges and limits of detection were for DPV 1.00 × 10−6–1.00 × 10−5 mol/L and 2.76 × 10−7 mol/L DIO for DPV and 1.00 × 10−7–2.50 × 10−6 mol/L and 7.42 × 10−8 mol/L DIO for AdSDPV, respectively. The DPV method was successfully applied for diosmin quantification in dietary supplement tablets. The percentage recovery was 99.87 ± 4.88%.

scholarly journals The effect of tamoxifen on the electrochemical behavior of Bi+3/Bi on the glassy carbon electrode and its determination via differential pulse anodic stripping voltammetry

2019 ◽  
Vol 63 (1) ◽  
Author(s):  
Mehdi Jalali ◽  
Zeinab Deris Falahieh ◽  
Mohammad Alimoradi ◽  
Jalal Albadi ◽  
Ali Niazi
Keyword(s):  
Glassy Carbon Electrode ◽  
Glassy Carbon ◽  
Electrochemical Behavior ◽  
Electrochemical Impedance ◽  
Anodic Stripping Voltammetry ◽  
Stripping Voltammetry ◽  
Differential Pulse ◽  
Peak Height ◽  
Carbon Electrode

The electrochemical behavior of Bi+3 ions on the surface of a glassy carbon electrode, in acidic media and in the presence of tamoxifen, was investigated. Cyclic voltammetry, chronoamperometry, differential pulse voltammetry, electrochemical impedance spectroscopy, and scanning electron microscopy with energy-dispersive X-ray spectroscopy were used to find the probable mechanism contributing to the reduction of the peak height of bismuth oxidation with an increase in the concentration of tamoxifen. The obtained results show a slight interaction between the bismuth species and tamoxifen which co-deposit on the surface of glassy carbon electrode. Therefore, the reduction in the peak height of bismuth oxidation as a function of tamoxifen concentration was used to develop a new differential pulse anodic striping voltammetry method for determination of trace amount of tamoxifen. The effects of experimental parameters on the in situ DPASV of Bi+3 ions in the presence of tamoxifen shown the optimal conditions as: 2 mol L-1 H2SO4 (1% v v-1 MeOH), a deposition potential of -0.5 V, a deposition time of 60 s, and a glassy carbon electrode rotation rate of 300 rpm. The calibration curve was plotted in the range of 0.5 to 6 µg mL-1 and the limits of detection and quantitation were calculated to be 3.1 × 10-5 µg mL-1 and 1.0 × 10-4 µg mL-1, respectively. The mean, RSD, and relative bias for 0.5 µg mL-1 (n=5) were found to be 0.49 µg mL-1, 0.3%, and 2%, respectively. Finally, the proposed method was successfully used for the determination of tamoxifen in serum and pharmaceutical samples.

scholarly journals Determination of Trace Metal Ions in Common Salt by Stripping Voltammetry

1999 ◽  
Vol 82 (6) ◽  
pp. 1413-1418 ◽  
Author(s):  
Azza M M Ali
Keyword(s):  
Metal Ion ◽  
Supporting Electrolyte ◽  
Standard Addition ◽  
Stripping Voltammetry ◽  
Differential Pulse ◽  
Ion Concentration ◽  
Common Salt ◽  
Trace Metal Ions

Abstract Sensitive voltammetric methods using cathodic and anodic differential pulse stripping techniques were applied for determination of trace ions cadmium(II), cobalt(II), copper(II), lead(II), manganese(II), nickel(II), and zinc(II), which are usually found in different grades of common salt as contaminants. The optimal conditions, i.e., deposition time, preconcentration potential, supporting electrolyte, and ionic strength, were investigated for each metal ion. Concentration of the metal ion was determined by the standard addition method. Metal content varied according to the quality of the table salt.

Sign in / Sign up

Export Citation Format

Share Document