scholarly journals Influence of Electrolyte Temperature on the Color Values of Black Plasma Electrolytic Oxidation Coatings on AZ31B Mg Alloy

Coatings ◽  
2020 ◽  
Vol 10 (9) ◽  
pp. 890
Author(s):  
Aihua Yi ◽  
Zhongmiao Liao ◽  
Wen Zhu ◽  
Zhisheng Zhu ◽  
Wenfang Li ◽  
...  
Keyword(s):  
Plasma Electrolytic Oxidation ◽  
Mg Alloy ◽  
Electrolyte Temperature ◽  
Electrolytic Oxidation ◽  
Key Factor ◽  
Different Temperatures ◽  
Color Value ◽  
Coating Color ◽  
Plasma Electrolytic ◽  
Peo Coatings

A coating was prepared on an AZ31B Mg alloy substrate via black plasma electrolytic oxidation (PEO). The colorant NH4VO3 was added to Na2SiO3–(NaPO3)6 electrolyte at different temperatures (5, 15, 25, and 35 °C). The influences of electrolyte temperature on the structures, compositions, and color values of black PEO coatings were studied by UV–Visible, XRD, XPS, Raman, and SEM techniques. The results showed that the relative content of V2O3 and V2O5 was the key factor affecting the coating color value. At higher temperatures, more NH3 escaped from the electrolyte and the NH3 quantity participating in the reaction decreased, resulting in a decrease of V2O3 content, an increase in color value, and a darker coating. In the PEO process, VO3− mainly reacted to form V2O5, and then, the generated V2O5 reacted with NH3 to form V2O3.

scholarly journals Effect of Pulse Current Mode on Microstructure, Composition and Corrosion Performance of the Coatings Produced by Plasma Electrolytic Oxidation on AZ31 Mg Alloy

Coatings ◽  
2019 ◽  
Vol 9 (10) ◽  
pp. 688 ◽  
Author(s):  
Maryam Rahmati ◽  
Keyvan Raeissi ◽  
Mohammad Reza Toroghinejad ◽  
Amin Hakimizad ◽  
Monica Santamaria
Keyword(s):  
Plasma Electrolytic Oxidation ◽  
Low Frequency ◽  
Current Mode ◽  
Mg Alloy ◽  
Corrosion Performance ◽  
Micro Cracks ◽  
Az31 Mg Alloy ◽  
Electrolytic Oxidation ◽  
Plasma Electrolytic ◽  
Peo Coatings

Plasma electrolytic oxidation (PEO) coatings were grown on AZ31 Mg alloy in a silicate-based electrolyte containing KF using unipolar and bipolar (usual and soft-sparking) waveforms. The coatings were dual-layered consisting of MgO, MgF2 and Mg2SiO4 phases. Surface morphology of the coatings was a net-like (scaffold) containing a micro-pores network, micro-cracks and granules of oxide compounds. Deep pores were observed in the coating produced by unipolar and usual bipolar waveforms. The soft-sparking eliminated the deep pores and produced the lowest porosity in the coatings. It was found that the corrosion performance of the coatings evaluated using EIS in 3.5 wt. % NaCl solution is mostly determined by the inner layer resistance, because of its higher compactness. After 4 days of immersion, the inner layer resistances were almost the same for all coatings. However, the coatings produced by unipolar and usual bipolar waveforms showed sharp decays in inner layer resistances after 1 week and even the barrier effect of outer layer was lost for the unipolar-produced coating after 3 weeks. The low-frequency inductive loops appeared after a 3-week immersion for all coatings indicated that the substrate was under local corrosion attack. However, both coatings produced by soft-sparking waveforms provided the highest corrosion performance.

scholarly journals Plasma Electrolytic Oxidation (PEO) Process—Processing, Properties, and Applications

Nanomaterials ◽  
2021 ◽  
Vol 11 (6) ◽  
pp. 1375
Author(s):  
Soumya Sikdar ◽  
Pramod V. Menezes ◽  
Raven Maccione ◽  
Timo Jacob ◽  
Pradeep L. Menezes
Keyword(s):  
Plasma Electrolytic Oxidation ◽  
Nanocomposite Coatings ◽  
Mechanical And Tribological Properties ◽  
Electrolytic Oxidation ◽  
Recent Developments ◽  
Coating Formation ◽  
Wear And Corrosion Resistance ◽  
Plasma Electrolytic ◽  
Peo Coatings ◽  
Future Work

Plasma electrolytic oxidation (PEO) is a novel surface treatment process to produce thick, dense metal oxide coatings, especially on light metals, primarily to improve their wear and corrosion resistance. The coating manufactured from the PEO process is relatively superior to normal anodic oxidation. It is widely employed in the fields of mechanical, petrochemical, and biomedical industries, to name a few. Several investigations have been carried out to study the coating performance developed through the PEO process in the past. This review attempts to summarize and explain some of the fundamental aspects of the PEO process, mechanism of coating formation, the processing conditions that impact the process, the main characteristics of the process, the microstructures evolved in the coating, the mechanical and tribological properties of the coating, and the influence of environmental conditions on the coating process. Recently, the PEO process has also been employed to produce nanocomposite coatings by incorporating nanoparticles in the electrolyte. This review also narrates some of the recent developments in the field of nanocomposite coatings with examples and their applications. Additionally, some of the applications of the PEO coatings have been demonstrated. Moreover, the significance of the PEO process, its current trends, and its scope of future work are highlighted.

scholarly journals Comparison of Biocompatible Coatings Produced by Plasma Electrolytic Oxidation on cp-Ti and Ti-Zr-Nb Superelastic Alloy

Coatings ◽  
2021 ◽  
Vol 11 (4) ◽  
pp. 401
Author(s):  
Ruzil Farrakhov ◽  
Olga Melnichuk ◽  
Evgeny Parfenov ◽  
Veta Mukaeva ◽  
Arseniy Raab ◽  
...  
Keyword(s):  
Plasma Electrolytic Oxidation ◽  
Electrochemical Impedance ◽  
Pure Titanium ◽  
Commercially Pure Titanium ◽  
X Ray ◽  
Kinetic Coefficients ◽  
Electrolytic Oxidation ◽  
Plasma Electrolytic ◽  
Cp Ti ◽  
Peo Coatings

The paper compares the coatings produced by plasma electrolytic oxidation (PEO) on commercially pure titanium and a novel superelastic alloy Ti-18Zr-15Nb (at. %) for implant applications. The PEO coatings were produced on both alloys in the identical pulsed bipolar regime. The properties of the coatings were examined using scanning electron microscopy (SEM), X-ray diffraction (XRD), and energy-dispersive X-ray spectroscopy (EDX), potentiodynamic polarization (PDP), and electrochemical impedance spectroscopy (EIS). The PEO process kinetics was modeled based on the Avrami theorem and Cottrell equation using a relaxation method. The resultant coatings contain TiO2, for both alloys, and NbO2, Nb2O5, ZrO2 for Ti-18Zr-15Nb alloy. The coating on the Ti-18Zr-15Nb alloy has a higher thickness, porosity, and roughness compared to that on cp-Ti. The values of the kinetic coefficients of the PEO process—higher diffusion coefficient and lower time constant for the processing of Ti-18Zr-15Nb—explain this effect. According to the electrochemical studies, PEO coatings on Ti-18Zr-15Nb alloy provide better corrosion protection. Higher corrosion resistance, porosity, and roughness contribute to better biocompatibility of the PEO coating on Ti-18Zr-15Nb alloy compared to cp-Ti.

scholarly journals Bioactivity Performance of Pure Mg after Plasma Electrolytic Oxidation in Silicate-Based Solutions

Molecules ◽  
2021 ◽  
Vol 26 (7) ◽  
pp. 2094
Author(s):  
Yevheniia Husak ◽  
Joanna Michalska ◽  
Oleksandr Oleshko ◽  
Viktoriia Korniienko ◽  
Karlis Grundsteins ◽  
...  
Keyword(s):  
Cell Culture ◽  
Oxide Layer ◽  
Plasma Electrolytic Oxidation ◽  
Oxide Coating ◽  
Mg Alloy ◽  
Aureus Strain ◽  
Active Surface Area ◽  
Corrosion Properties ◽  
Electrolytic Oxidation ◽  
Plasma Electrolytic

The biodegradable metals, including magnesium (Mg), are a convenient alternative to permanent metals but fast uncontrolled corrosion limited wide clinical application. Formation of a barrier coating on Mg alloys could be a successful strategy for the production of a stable external layer that prevents fast corrosion. Our research was aimed to develop an Mg stable oxide coating using plasma electrolytic oxidation (PEO) in silicate-based solutions. 99.9% pure Mg alloy was anodized in electrolytes contained mixtures of sodium silicate and sodium fluoride, calcium hydroxide and sodium hydroxide. Scanning electron microscopy (SEM), energy-dispersive X-ray spectroscopy (EDX), contact angle (CA), Photoluminescence analysis and immersion tests were performed to assess structural and long-term corrosion properties of the new coating. Biocompatibility and antibacterial potential of the new coating were evaluated using U2OS cell culture and the gram-positive Staphylococcus aureus (S. aureus, strain B 918). PEO provided the formation of a porous oxide layer with relatively high roughness. It was shown that Ca(OH)2 was a crucial compound for oxidation and surface modification of Mg implants, treated with the PEO method. The addition of Ca2+ ions resulted in more intense oxidation of the Mg surface and growth of the oxide layer with a higher active surface area. Cell culture experiments demonstrated appropriate cell adhesion to all investigated coatings with a significantly better proliferation rate for the samples treated in Ca(OH)2-containing electrolyte. In contrast, NaOH-based electrolyte provided more relevant antibacterial effects but did not support cell proliferation. In conclusion, it should be noted that PEO of Mg alloy in silicate baths containing Ca(OH)2 provided the formation of stable biocompatible oxide coatings that could be used in the development of commercial degradable implants.

Sign in / Sign up

Export Citation Format

Share Document