scholarly journals Improving the Low-Temperature Performance of RET Modified Asphalt Mixture with Different Modifiers

Coatings ◽  
2020 ◽  
Vol 10 (11) ◽  
pp. 1070
Author(s):  
Cheng Xu ◽  
Zhengqi Zhang ◽  
Feifei Liu
Keyword(s):  
Low Temperature ◽  
Asphalt Mixture ◽  
Bending Test ◽  
Creep Recovery ◽  
Dry Process ◽  
Modified Asphalt ◽  
Temperature Performance ◽  
Comparison Results ◽  
Beam Bending ◽  
Low Temperature Performance

To improve the low-temperature performance of RET (Reactive Elastomeric Terpolymer) modified asphalt mixture (RETM), polyurethane prepolymer (PUP) was used by wet process, ground waste rubber (GWR) and fibers were used by dry process. Tests of force ductility, bending beam rheometer (BBR), differential scanning calorimeter (DSC), viscosity and multiple stress creep recovery (MSCR) were conducted to study the effects of PUP on the performance of RET modified asphalt (RETA), and beam bending test was conducted to study the effects of GWR and fibers on the performance of RETM. Then, tests of beam bending, wheel tracking, Marshall immersion, freeze-thaw splitting, and economic analysis were further conducted to compare the performance and economy of RETM modified with optimum modifiers suggested. All modifiers improve the low-temperature performance of RETM. PUP content, the content and size of GWR and the content and type of fibers significantly affect the performance of RETA or RETM respectively. After analysis, 10% PUP, 2.1% 80 mesh GWR and 0.2% polyester (PE) fiber are considered as the optimum modifiers, respectively. Comparison results show that optimum modifiers variously improve the low-temperature performance, rutting resistance and moisture susceptibility of RETM, but they slightly reduced the economy of RETM. Comprehensive evaluation shows that 2.1% 80 mesh GWR and 10% PUP are better than 0.2% PE fiber.

Applied Research of the Modifying Agent of Rubber Plastic Composite (MaR) in Asphalt Mixture

2013 ◽  
Vol 477-478 ◽  
pp. 1175-1178
Author(s):  
Ling Zou ◽  
Jing Wei Ne ◽  
Weng Gang Zhang
Keyword(s):  
High Temperature ◽  
Low Temperature ◽  
Asphalt Mixture ◽  
Bending Test ◽  
Water Stability ◽  
Modified Asphalt ◽  
Modifying Agent ◽  
Temperature Performance ◽  
Splitting Test ◽  
Low Temperature Performance

70# and 90# matrix asphalt mixture with MaR were studied through dynamic modulus test, rutting test, freeze-thaw splitting test, bending test to study the applicability of the Modifying agent of rubber plastic compound (MaR) in matrix asphalt mixture.Test results were Compared with SBSI-C modified asphalt mixture.The results indicate that: high-temperature stability of MaR+70# asphalt mixture is as well as SBSI-C modified asphalt mixture,and is bettere than MaR+90# asphalt mixture; water stability of MaR+90# asphalt mixture is bettere than SBSI-C modified asphalt mixture and MaR+70# asphalt mixture; low temperature performance of MaR+90# asphalt mixture is bettere than MaR+70# asphalt mixture, but is worse than modified asphalt mixture SBSI-C ; MaR+70# asphalt mixture can be first used in area of resisting high temperature and rutting, MaR+90# asphalt mixture can be used if the water stability performance and low temperature performance are considered.

Evaluation of Low Temperature Performance for Diatomite Modified Asphalt Mixture

2011 ◽  
Vol 413 ◽  
pp. 246-251 ◽  
Author(s):  
Yi Bo Zhang ◽  
Hong Zhou Zhu ◽  
Guo An Wang ◽  
Tuan Jie Chen
Keyword(s):  
Performance Evaluation ◽  
Low Temperature ◽  
Asphalt Mixture ◽  
Bending Test ◽  
Large Temperature ◽  
Index Test ◽  
Stiffness Modulus ◽  
Modified Asphalt ◽  
Temperature Performance ◽  
Low Temperature Performance

According to the low temperature disease on asphalt pavement in the areas of cold and large temperature difference between day and night, conventional index test and low temperature bending creep test were used to analyze the influence of diatomite dosage on the low temperature performance of diatomite modified asphalt, and the mixture’s low temperature bending test was applied for verification. Test results show that after diatomite’s addition into asphalt, equivalent brittle point reduces significantly, ductility test cannot estimate low temperature performance very well, stiffness modulus increases and relaxation ability decreases; meanwhile, peak value of stiffness modulus and strain energy of asphalt mixture can be found, the low temperature crack resistance is enhanced; optimum dosage of diatomite is 13%. So, the low temperature performance evaluation method of diatomite modified asphalt mixture through BBR’s low temperature performance evaluation on diatomite modified asphalt remains to be discussed.

scholarly journals Research on the Impact of Recycled Asphalt Mixture on Road Performance Based on New Thermal Recycling

2022 ◽  
Vol 2152 (1) ◽  
pp. 012005
Author(s):  
Peng Yin ◽  
Yuanguang Xie ◽  
Huixi Lang
Keyword(s):  
Low Temperature ◽  
Correlation Analysis ◽  
Asphalt Mixture ◽  
Bending Test ◽  
Recycled Asphalt ◽  
Modified Asphalt ◽  
Temperature Performance ◽  
Road Performance ◽  
Low Temperature Performance ◽  
Sbs Modified Asphalt

Abstract Different binder content to RAP Regeneration SBS modified asphalt mixture for road performance to SBS modified asphalt (I-D type) as an index, determine the optimum dose of new heat regenerating agent and different RAP regeneration, and prepared different recycled asphalt, which have differences in RAP content. The performance of recycled asphalt mixture with different RAP content was evaluated by freeze-thaw splitting test. Rut test and Low temperature trabecular bending test. The correlation between RAP content and pavement performance was analyzed by grey system correlation analysis method. According to the experimental verification results, it can be known that increasing the content of RAP material can improve the high-temperature performance of reclaimed asphalt, but will result in a qualitative decrease in low-temperature performance and water temperature, but the above-mentioned performance can reach the required level, Shows that new heat regenerators play a role in the road performance of RAP materials, and for the RAP material utilization ratio of more than 50%, as for the gray correlation analysis, it can be found that there is a close correlation between the low-temperature performance of recycled asphalt mixture and the content of RAP material. The low temperature cracking resistance of asphalt mixtures will change significantly due to the slight changes in RAP materials.

scholarly journals Preparation and Properties of an Active Cooling Antirutting Asphalt Mixture

2020 ◽  
Vol 2020 ◽  
pp. 1-11
Author(s):  
Shuan Li ◽  
Xianghang Li ◽  
Xinquan Xu ◽  
Xiaoping Ji ◽  
Dawei Lv ◽  
...  
Keyword(s):  
Low Temperature ◽  
Asphalt Mixture ◽  
Water Stability ◽  
High Temperature Stability ◽  
Plate Temperature ◽  
Cooling Performance ◽  
Modified Asphalt ◽  
Active Cooling ◽  
Temperature Performance ◽  
Low Temperature Performance

To reduce the temperature of asphalt pavements in summer and improve their high-temperature stability, tourmaline anion powder (TAP) was used as a modifier to prepare modified asphalt, which actively cools the pavement. The effects of different TAP contents on the high- and low-temperature performance of modified asphalt and its pavement cooling performance were studied based on the dynamic shear rheometer, low-temperature bending beam rheometer, and indoor rutting plate temperature difference tests; subsequently, the optimum TAP content was determined. Modified asphalt was used to prepare an active cooling antirutting asphalt mixture, and its pavement cooling performance was verified via outdoor lighting tests. High- and low-temperature dynamic modulus and low-temperature semicircular splitting tests were used to evaluate the high- and low-temperature performance; further, freeze-thaw splitting and immersion Marshall tests were performed to evaluate the water stability of the active cooling antirutting asphalt mixture. The results denote that TAP is useful for improving the rutting factor of asphalt. When the TAP content is 16% of the asphalt material, the maximum cooling value of the surface in laboratory tests becomes 5.9°C. When compared with an ordinary asphalt mixture, the dynamic stability of the active cooling antirutting asphalt mixture at medium and high temperatures increased by 18%–22%. The fracture energy can be increased by 12% at low temperatures. The maximum cooling value of the surfaces in outdoor tests is 7.2°C, and the water stability slightly decreases; however, it still satisfies the specification requirements.

Study on Low Temperature Performance of SBS Modified Asphalt and its Mixture

2014 ◽  
Vol 587-589 ◽  
pp. 1332-1336
Author(s):  
Jun Qing Chen ◽  
Ai Jun Li ◽  
Mei Qian Jin ◽  
Min Nan Zheng ◽  
Wan Yi Yang
Keyword(s):  
Tensile Strength ◽  
Low Temperature ◽  
Temperature Stress ◽  
Asphalt Pavement ◽  
Asphalt Mixture ◽  
Modified Asphalt ◽  
Temperature Performance ◽  
Low Temperature Cracking ◽  
Low Temperature Performance ◽  
Sbs Modified Asphalt

Prone to low temperature cracking of asphalt pavement problems in cold areas, testing BBR on 70# base asphalt and 4 kinds of different dosage of SBS modified asphalt, testing TSRST on their mixture to appraisal the low temperature performance of SBS modified asphalt mixture. Results show that compared with the temperature stress of internal cracks of base asphalt and SBS modified asphalt mixture not rise significantly. But the stress of SBS asphalt mixture growing slow and the temperature of cracking reduce obviously; it means the low temperature performance improved. This shows that SBS improves the toughness and reduced the modulus of asphalt mixture in low temperature, rather than increasing the tensile strength of mixture specimens.

scholarly journals High and Low-Temperature Performance Evaluation and Microanalysis of SMCSBS Compound-Modified Asphalt

Materials ◽  
2021 ◽  
Vol 14 (4) ◽  
pp. 771
Author(s):  
Yu Sun ◽  
Dongpo He
Keyword(s):  
High Temperature ◽  
Low Temperature ◽  
Asphalt Mixture ◽  
Modified Asphalt ◽  
The Road ◽  
Temperature Performance ◽  
Creep Stiffness ◽  
Low Temperature Performance ◽  
Styrene Butadiene ◽  
Sbs Modified Asphalt

The mixture of styreneic methyl copolymers (SMCs) normal temperature-modified asphalt and styrene-butadiene styrene block copolymer (SBS)-modified asphalt (SMCSBS) compound-modified asphalt was investigated in this study. The viscosity and temperature properties of compound modified asphalt (SMCSBS) were studied by Brookfield rotary viscosity test. Dynamic shear rheometer (DSR) and bending beam rheometer (BBR) were used to test SMCSBS compound modified asphalt with different SMC additions. Finally, the microstructure and physicochemical properties of SMCSBS were evaluated by scanning electron microscopy (SEM) and Fourier transform infrared spectroscopy (FTIR), and the modification mechanism of the SMCSBS was studied. The results show that the viscosity of the compound-modified asphalt added with SMC is improved, which is conducive to improving its workability. With the increase of SMC content, the high-temperature performance of the compound modified asphalt firstly increases and then decreases with the increase of SMC content. When the content of SMC is 12%, its high-temperature performance is the best. Compared with SBS-modified asphalt, the SMCSBS has better low-temperature performance, and the creep stiffness S and creep rate m of the SMC with different content are better than that of SBS. Finally, the microcosmic characteristics show that the SMC can give full play to its characteristics and can be uniformly dispersed in SBS modified asphalt. SMC is essentially a surfactant, which can reduce the viscosity and construction temperature by changing the surface tension and surface free energy of asphalt molecules. The curing agent of epoxy resin is slowly cross-linked and cured after contacting with air to form a certain strength, thus improving the road performance of the asphalt mixture.

Research on Low Temperature Performance of Epoxy Asphalt Mixture

2010 ◽  
Vol 34-35 ◽  
pp. 1124-1128 ◽  
Author(s):  
Sang Luo ◽  
Zhen Dong Qian
Keyword(s):  
Low Temperature ◽  
Asphalt Mixture ◽  
Bending Test ◽  
Thermal Contraction ◽  
Orthotropic Steel Deck ◽  
Temperature Performance ◽  
Epoxy Asphalt ◽  
Specimen Test ◽  
Low Temperature Performance ◽  
Steel Deck

Low-temperature cracking is a significant and costly problem for pavement on the orthotropic steel deck. As a popular material used on the steel deck pavement, the low-temperature performance of epoxy asphalt mixture was investigated. In this research, the three-point bending test, the thermal stress restrained specimen test (TSRST) and the coefficient of thermal contraction test were conducted to achieve the flexural strain energy, the fracture temperature, and the coefficient of thermal contraction respectively. Test results show that epoxy asphalt mixture performs excellently on low-temperature properties and has a prominent deformation compliance with the steel deck. Findings from the research indicate that epoxy asphalt mixture is an alternative material paved on the orthotropic steel deck due to its profound low-temperature performance.

Evaluation of Service Performance of Recycled SBS Modified Asphalt Pavement

2014 ◽  
Vol 1079-1080 ◽  
pp. 152-155
Author(s):  
Yuan Yuan Wang ◽  
Lu Sun
Keyword(s):  
High Temperature ◽  
Low Temperature ◽  
Asphalt Mixture ◽  
Pavement Materials ◽  
Modified Asphalt ◽  
Temperature Performance ◽  
Marshall Test ◽  
Moisture Stability ◽  
Low Temperature Performance ◽  
Sbs Modified Asphalt

Using the waste pavement materials can not only save resources such as bitumen and aggregate, but also reduce the pollution of environment. In this study, the high temperature performance and the moisture stability of recycled SBS modified asphalt mixture were evaluated by rutting test, immersion Marshall Test and freeze-thaw splitting routine test. In addition, the low temperature performance of recycled modified mixture was also analyzed by Fénix test whose operation was simple. The tests results illustrated that it was advantageous to improve the high temperature performance of recycled mixture and it has less influence on moisture stability with the addition of RAP. However, it had a significant adverse effect on the low temperature performance for recycled SBS modified asphalt mixture with a large quantity of RAP content. Therefore, it suggests that the RAP content for recycled SBS modified mixture is not too high.

Sign in / Sign up

Export Citation Format

Share Document