scholarly journals Orbital Angular Momentum-Based Multiple-Input-Multiple-Output with Receive Antenna Shift Keying for 6G

Electronics ◽  
2021 ◽  
Vol 10 (13) ◽  
pp. 1567
Author(s):  
Sang-Hoon Lee ◽  
Ahmed Al Al Amin ◽  
Soo-Young Shin
Keyword(s):  
Angular Momentum ◽  
Wireless Communication ◽  
Communication Systems ◽  
Multiple Input Multiple Output ◽  
Wireless Communication Systems ◽  
Time Code ◽  
Multiple Input ◽  
Shift Keying ◽  
Input Multiple Output ◽  
Receive Antenna

Spectral efficiency is a major concern for future 6G wireless communication systems. Thus, an appropriate scheme is needed to provide channel capacity improvement for multiple transmitters and receiver-based wireless communication systems without consuming extra resource for communication (e.g., frequency/time/code) or causing interference. Therefore, to fulfill the mentioned requirements for the future 6G wireless network, orbital angular momentum-based multiple-input-multiple-output (OAM-MIMO) multiplexing technique is incorporated with the receive antenna shift keying (RASK) technique in this study (termed as the OAM-MIMO-RASK scheme). OAM-MIMO-RASK can transfer multiple symbols from multiple transmitters to different receivers simultaneously by using multiple subchannels using the OAM and RASK techniques without any interference or additional resource (frequency/time/code). The numerical results illustrated that the proposed OAM-MIMO-RASK can achieve almost double capacity than the existing OAM-MIMO scheme and significantly higher capacity than the existing RASK-based scheme for different values of signal-to-noise ratio. Moreover, the simulation result is validated by the theoretical result which is also shown by the numerical result. In addition, due to different normalized distances from the transmitters and receivers, the proposed OAM-MIMO-RASK scheme can achieve almost double capacity than the existing OAM-MIMO scheme by using OAM-MIMO and RASK technique effectively which is also depicted by the numerical results.

scholarly journals Networked multiple-input-multiple-output for optical wireless communication systems

2020 ◽  
Vol 378 (2169) ◽  
pp. 20190189 ◽  
Author(s):  
Zhaocheng Wang ◽  
Jiaxuan Chen
Keyword(s):  
Wireless Communication ◽  
Communication Systems ◽  
Multiple Input Multiple Output ◽  
Optical Devices ◽  
Heterogeneous Data ◽  
Spatial Multiplexing ◽  
Optical Wireless Communication ◽  
Optical Wireless ◽  
Multiple Input ◽  
Input Multiple Output

With the escalation of heterogeneous data traffic, the research on optical wireless communication (OWC) has attracted much attention, owing to its advantages such as wide spectrum, low power consumption and high security. Ubiquitous optical devices, e.g. light-emitting diodes (LEDs) and cameras, are employed to support optical wireless links. Since the distribution of these optical devices is usually dense, multiple-input-multiple-output (MIMO) can be naturally adopted to attain spatial diversity gain or spatial multiplexing gain. As the scale of OWC networks enlarges, optical MIMO can also collaborate with network-level operations, like user/AP grouping, to enhance the network throughput. Since OWC is preferred for short-range communications and is sensitive to the directions/rotations of transceivers, optical MIMO links vary frequently and sharply in outdoor scenarios when considering the mobility of optical devices, raising new challenges to network design. In this work, we present an overview of optical MIMO techniques, as well as the cooperation of MIMO and user/AP grouping in OWC networks. In consideration of the challenges for outdoor OWC, key technologies are then proposed to facilitate the adoption of optical MIMO in outdoor scenarios, especially in vehicular ad hoc networks. Lastly, future applications of MIMO in OWC networks are discussed. This article is part of the theme issue ‘Optical wireless communication’.

scholarly journals Study of 5G-NR-MIMO Links in the Presence of an Interferer

Electronics ◽  
2021 ◽  
Vol 10 (6) ◽  
pp. 732
Author(s):  
Avner Elgam ◽  
Yael Balal ◽  
Yosef Pinhasi
Keyword(s):  
Mobile Networks ◽  
Communication Systems ◽  
Multiple Input Multiple Output ◽  
Local Area ◽  
Maximum Energy ◽  
Base Station ◽  
Small Cells ◽  
Diversity Coding ◽  
Shift Keying ◽  
Input Multiple Output

Many communication systems are based on the Multiple Input, Multiple Output (MIMO) scheme, and Orthogonal Space–time Block Transmit diversity Coding (OSTBC), combined with Maximal Ratio Receive Combining (MRRC), to create an optimal diversity system. A system with optimal diversity fixes and optimizes the channel’s effects under multi-path and Rayleigh fading with maximum energy efficiency; however, the challenge does not end with dealing with the channel destruction of the multi-path impacts. Susceptibility to interference is a significant vulnerability in future wireless mobile networks. The 5th Generation New Radio (5G-NR) technologies bring hundreds of small cells and pieces of User Equipment (UE) per indoor or outdoor local area scenario under a specific Long Term Evolution (LTE)-based station (e-NodeB), or under 5G-NR base-station (g-NodeB). It is necessary to study issues that deal with many interference signals, and smart jammers from advanced communication equipment cause deterioration in the links between the UE, the small cells, and the NodeB. In this paper, we study and present the significant impact and performances of 2×2 Alamouti Phase-Shift Keying (PSK) modulation techniques in the presence of an interferer and a smart jammer. The destructive effects affecting the MIMO array and the advanced diversity technique without closed-loop MIMO are analyzed. The performance is evaluated in terms of Bit Error Rate (BER) vs. Signal to Interference Ratio (SIR). In addition, we proved the impairment of the orthogonal spectrum assumption mathematically.

Sign in / Sign up

Export Citation Format

Share Document