Multiple-input multiple-output wireless communication systems using antenna pattern diversity

Author(s):  
Liang Dong ◽  
Hao Ling ◽  
R.W.Jr. Heath
Electronics ◽  
2021 ◽  
Vol 10 (13) ◽  
pp. 1567
Author(s):  
Sang-Hoon Lee ◽  
Ahmed Al Al Amin ◽  
Soo-Young Shin

Spectral efficiency is a major concern for future 6G wireless communication systems. Thus, an appropriate scheme is needed to provide channel capacity improvement for multiple transmitters and receiver-based wireless communication systems without consuming extra resource for communication (e.g., frequency/time/code) or causing interference. Therefore, to fulfill the mentioned requirements for the future 6G wireless network, orbital angular momentum-based multiple-input-multiple-output (OAM-MIMO) multiplexing technique is incorporated with the receive antenna shift keying (RASK) technique in this study (termed as the OAM-MIMO-RASK scheme). OAM-MIMO-RASK can transfer multiple symbols from multiple transmitters to different receivers simultaneously by using multiple subchannels using the OAM and RASK techniques without any interference or additional resource (frequency/time/code). The numerical results illustrated that the proposed OAM-MIMO-RASK can achieve almost double capacity than the existing OAM-MIMO scheme and significantly higher capacity than the existing RASK-based scheme for different values of signal-to-noise ratio. Moreover, the simulation result is validated by the theoretical result which is also shown by the numerical result. In addition, due to different normalized distances from the transmitters and receivers, the proposed OAM-MIMO-RASK scheme can achieve almost double capacity than the existing OAM-MIMO scheme by using OAM-MIMO and RASK technique effectively which is also depicted by the numerical results.


Author(s):  
Zhaocheng Wang ◽  
Jiaxuan Chen

With the escalation of heterogeneous data traffic, the research on optical wireless communication (OWC) has attracted much attention, owing to its advantages such as wide spectrum, low power consumption and high security. Ubiquitous optical devices, e.g. light-emitting diodes (LEDs) and cameras, are employed to support optical wireless links. Since the distribution of these optical devices is usually dense, multiple-input-multiple-output (MIMO) can be naturally adopted to attain spatial diversity gain or spatial multiplexing gain. As the scale of OWC networks enlarges, optical MIMO can also collaborate with network-level operations, like user/AP grouping, to enhance the network throughput. Since OWC is preferred for short-range communications and is sensitive to the directions/rotations of transceivers, optical MIMO links vary frequently and sharply in outdoor scenarios when considering the mobility of optical devices, raising new challenges to network design. In this work, we present an overview of optical MIMO techniques, as well as the cooperation of MIMO and user/AP grouping in OWC networks. In consideration of the challenges for outdoor OWC, key technologies are then proposed to facilitate the adoption of optical MIMO in outdoor scenarios, especially in vehicular ad hoc networks. Lastly, future applications of MIMO in OWC networks are discussed. This article is part of the theme issue ‘Optical wireless communication’.


Electronics ◽  
2021 ◽  
Vol 10 (4) ◽  
pp. 405
Author(s):  
Hijab Zahra ◽  
Wahaj Abbas Awan ◽  
Wael Abd Ellatif Ali ◽  
Niamat Hussain ◽  
Syed Muzahir Abbas ◽  
...  

In this paper, an end-fire antenna for 28 GHz broadband communications is proposed with its multiple-input-multiple-output (MIMO) configuration for pattern diversity applications in 5G communication systems and the Internet of Things (IoT). The antenna comprises a simple geometrical structure inspired by a conventional planar helical antenna without utilizing any vias. The presented antenna is printed on both sides of a very thin high-frequency substrate (Rogers RO4003, εr = 3.38) with a thickness of 0.203 mm. Moreover, its MIMO configuration is characterized by reasonable gain, high isolation, good envelope correlation coefficient, broad bandwidth, and high diversity gain. To verify the performance of the proposed antenna, it was fabricated and verified by experimental measurements. Notably, the antenna offers a wide −10 dB measured impedance ranging from 26.25 GHz to 30.14 GHz, covering the frequency band allocated for 5G communication systems with a measured peak gain of 5.83 dB. Furthermore, a performance comparison with the state-of-the-art mm-wave end-fire antennas in terms of operational bandwidth, electrical size, and various MIMO performance parameters shows the worth of the proposed work.


Sign in / Sign up

Export Citation Format

Share Document