scholarly journals Regression Models for the Evaluation of the Techno-Economic Potential of Organic Rankine Cycle-Based Waste Heat Recovery Systems on Board Ships Using Low Sulfur Fuels

Energies ◽  
2020 ◽  
Vol 13 (6) ◽  
pp. 1378 ◽  
Author(s):  
Enrico Baldasso ◽  
Maria E. Mondejar ◽  
Ulrik Larsen ◽  
Fredrik Haglind

When considering waste heat recovery systems for marine applications, which are estimated to be suitable to reduce the carbon dioxide emissions up to 20%, the use of organic Rankine cycle power systems has been proven to lead to higher savings compared to the traditional steam Rankine cycle. However, current methods to estimate the techno-economic feasibility of such a system are complex, computationally expensive and require significant specialized knowledge. This is the first article that presents a simplified method to carry out feasibility analyses for the implementation of organic Rankine cycle waste heat recovery units on board vessels using low-sulfur fuels. The method consists of a set of regression curves derived from a synthetic dataset obtained by evaluating the performance of organic Rankine cycle systems over a wide range of design and operating conditions. The accuracy of the proposed method is validated by comparing its estimations with the ones attained using thermodynamic models. The results of the validation procedure indicate that the proposed approach is capable of predicting the organic Rankine cycle annual energy production and levelized cost of electricity with an average accuracy within 4.5% and 2.5%, respectively. In addition, the results suggest that units optimized to minimize the levelized cost of electricity are designed for lower engine loads, compared to units optimized to maximize the overall energy production. The reliability and low computational time that characterize the proposed method, make it suitable to be used in the context of complex optimizations of the whole ship’s machinery system.

2021 ◽  
Vol 313 ◽  
pp. 06001
Author(s):  
Siddharth Ramachandran ◽  
Naveen Kumar ◽  
Venkata Timmaraju Mallina

Despite the higher efficiency advantage, the cost reduction of PV technology has been more successful compared to the dish Stirling engine (DSE) due to the large market volume and sturdy competition. Irrespective of the types of source, there exists a potential of waste heat recovery from Stirling engines operating at higher temperature regime. Accordingly, to make DSE commercially viable and efficient, innovative ways such as hybridization (combing a bottoming cycle), Co-generation, Tri-generation etc. need to be explored. In this paper, the techno-economic feasibility of hybridization of a typical solar DSE with a bottoming organic Rankine cycle (ORC) via. a heat recovery vapour generator (HRVG) is explored. The overall energetic and exergetic efficiency of the DSE has been improved by 5.79% and 5.64% while recovering the waste heat through a bottoming ORC. The design and effective incorporation of the HRVG with cooler side of the Stirling engine is identified to be crucial for the overall exergetic performance of solar Stirling-ORC. Further, the economic feasibility of a solar String-ORC combination is evaluated in terms of levelized cost of electricity (LCOE) and payback period. Both LCOE and payback period are found to be in comparable range with the PV technology.


2021 ◽  
Vol 11 (5) ◽  
pp. 1984
Author(s):  
Ramin Moradi ◽  
Emanuele Habib ◽  
Enrico Bocci ◽  
Luca Cioccolanti

Organic Rankine cycle (ORC) systems are some of the most suitable technologies to produce electricity from low-temperature waste heat. In this study, a non-regenerative, micro-scale ORC system was tested in off-design conditions using R134a as the working fluid. The experimental data were then used to tune the semi-empirical models of the main components of the system. Eventually, the models were used in a component-oriented system solver to map the system electric performance at varying operating conditions. The analysis highlighted the non-negligible impact of the plunger pump on the system performance Indeed, the experimental results showed that the low pump efficiency in the investigated operating range can lead to negative net electric power in some working conditions. For most data points, the expander and the pump isentropic efficiencies are found in the approximate ranges of 35% to 55% and 17% to 34%, respectively. Furthermore, the maximum net electric power was about 200 W with a net electric efficiency of about 1.2%, thus also stressing the importance of a proper selection of the pump for waste heat recovery applications.


Energies ◽  
2017 ◽  
Vol 10 (3) ◽  
pp. 327 ◽  
Author(s):  
Alberto Benato ◽  
Alarico Macor

Sign in / Sign up

Export Citation Format

Share Document