scholarly journals Fault-Tolerant Control of Coil Inter-Turn Short-Circuit in Five-Phase Permanent Magnet Synchronous Motor

Energies ◽  
2020 ◽  
Vol 13 (21) ◽  
pp. 5669
Author(s):  
Dingyu Wang ◽  
Yiguang Chen
Keyword(s):  
Permanent Magnet ◽  
Fault Tolerant ◽  
Short Circuit ◽  
Permanent Magnet Synchronous Motor ◽  
Harmonic Component ◽  
Short Circuit Current ◽  
Torque Ripple ◽  
Synchronous Motor ◽  
Even Order ◽  
Gain Compensation

In the five-phase permanent magnet synchronous motor (PMSM) control system, the torque ripple caused by coil inter-turn short-circuit (ITSC)fault will make the motor performance worse. Due to the existence of the short-circuit current in the faulty phase and the third harmonic component in the permanent magnet flux linkage, the electromagnetic torque will contain even-order ripple components when the faulty phase is removed. Torque ripple also cause speed ripple. In this paper, the repetitive controller (RC) is used to perform proportional gain compensation for speed ripple. By designing the RC and connecting RC and proportional integral (PI) controller in parallel for the speed loop, the torque ripple amplitude can be reduced. It can be seen from the simulation and experimental results that the torque ripple suppression strategy based on RC can effectively suppress the torque ripple under ITSC fault.

scholarly journals Multiphase SVPWM Strategy Analysis and Implementation of Seven-Phase Permanent Magnet Synchronous Motor

Complexity ◽  
2020 ◽  
Vol 2020 ◽  
pp. 1-12
Author(s):  
Mingli Lu ◽  
Dong Zhang ◽  
Benlian Xu ◽  
Haodong Yang ◽  
Yi Xin
Keyword(s):  
Permanent Magnet ◽  
Electric Propulsion ◽  
High Reliability ◽  
Permanent Magnet Synchronous Motor ◽  
Harmonic Component ◽  
Torque Ripple ◽  
Synchronous Motor ◽  
Phase System ◽  
Strategy Analysis ◽  
Multiphase Motor

The multiphase motor drive systems have become a focus in many application areas such as ship electric propulsion, urban mass transit, aerospace, and weapon equipment, as they are characterized by high power density, low torque pulsation as small torque ripple, large output power, strong fault tolerance, and high reliability. However, with the increase of the phase number of the motor, the current harmonic component increases correspondingly, which leads to the decrease of the control performance compared with the three-phase system. In order to overcome this challenge, implementation method of driving control technology for seven-phase permanent magnet synchronous motor (PMSM) based on SVPWM algorithm is discussed thoroughly in this paper. Simulink and experiments have been developed to check its practical feasibility. The results show that the near-six vector SVPWM algorithm (NSV-SVPWM) achieves better performance than other methods.

scholarly journals Unified Fault-tolerant Control Strategy with Torque Ripple Compensation for Five-phase Permanent Magnet Synchronous Motor Based on Normal Decoupling

Energies ◽  
2019 ◽  
Vol 12 (6) ◽  
pp. 1127 ◽  
Author(s):  
Guodong Sun ◽  
Guijie Yang ◽  
Yanyi Wang ◽  
Jianyong Su
Keyword(s):  
Permanent Magnet ◽  
Control Strategy ◽  
Fault Tolerant ◽  
Permanent Magnet Synchronous Motor ◽  
Fault Tolerant Control ◽  
Torque Ripple ◽  
Synchronous Motor ◽  
Current Control ◽  
Magnetomotive Force ◽  
Open Phase

In this paper, the decoupling matrix in a five-phase permanent magnet synchronous motor (FPMSM) is rebuilt and changed, according to different open-phase conditions, which complicate the switch and control algorithm. This paper proposes a unified fault-tolerant control strategy with decoupling transformation matrix, effectively suppressing the torque ripple for several open-phase faults. The current algorithms for different open-phase faults are demonstrated; torque ripple, especially, is analyzed with third harmonic magnetomotive force (MMF). The unified current control law is expressed with two adjustable coefficients, which are regulated for torque ripple compensation. As the current control equation remains unchanged, the fault-tolerant can smoothly switch from normal to fault condition, only with different coefficients. The proposed method with torque compensation (TC) can realize effective suppression of torque ripple. The decoupling relationship between open-phase control laws and fault-tolerant current is verified by simulation. The torque ripple of fault-tolerant and effect of torque compensation (TC) under all fault-tolerant conditions are simulated by finite element simulation. The stability of switching and correctness of torque compensation are verified by experiments.

Research on modeling and fault diagnosis of inter-turn short fault of permanent magnet synchronous motor

2020 ◽  
Vol 20 (3) ◽  
pp. 959-973 ◽  
Author(s):  
Hongqian Hu ◽  
Weifeng Shi ◽  
Benjamin Venditti
Keyword(s):  
Fault Diagnosis ◽  
Permanent Magnet ◽  
Short Circuit ◽  
Permanent Magnet Synchronous Motor ◽  
Torque Ripple ◽  
Synchronous Motor ◽  
Analysis Model ◽  
Diagnosis Method ◽  
On Line ◽  
Circuit Resistance

The stator winding inter-turn short fault of permanent magnet synchronous motor (PMSM) is a common motor fault with high probability. If this fault is not detected and handled in time, small initial fault will rapidly develop into other faults such as grounding short, inter-phase short, winding short et al., and even the motor damage. In order to diagnose the inter-turn short fault of PMSM, this paper firstly builds the model of the inter-turn short fault of PMSM, and then proposes a fast and simple fault diagnosis method for extracting the features of the inter-turn short fault under noise. For the first time, by introducing the full-short-circuit resistance Rf that relates with the fault severity factor δ and by estimating the inductance of inter-turn short fault motor on-line according to the three principles of the inductance calculation, which is used in the inter-turn short fault of transformer winding, the inter-turn short analysis model of PMSM is deduced. The model can be used to simulate the performance not only the health of PMSM but also the fault of inter-turn short fault of PMSM in one phase winding. This paper analyses the transient and steady state performance of 3-phase unbalanced current, speed and electromagnetic torque ripple and the relationship between full-short-circuit resistance and short current under fault condition. Finally, a fast and simple on-line fault diagnosis method of PMSM with inter-turn short fault is proposed based on phase sensitive detection (PSD) algorithm. The method uses the fundamental and third harmonic features of inter-turn short fault current. The simulation results show that the model can be well suited for the simulation of PMSM with inter-turn short fault, and the method can effectively extract the features and diagnose the fault.

scholarly journals Fault-Tolerant Control Strategy for 12-Phase Permanent Magnet Synchronous Motor

Energies ◽  
2019 ◽  
Vol 12 (18) ◽  
pp. 3462 ◽  
Author(s):  
Hanying Gao ◽  
Wen Zhang ◽  
Yu Wang ◽  
Zhuo Chen
Keyword(s):  
Permanent Magnet ◽  
Control Strategy ◽  
Fault Tolerant ◽  
High Reliability ◽  
Permanent Magnet Synchronous Motor ◽  
Fault Tolerant Control ◽  
Torque Ripple ◽  
Synchronous Motor ◽  
Open Circuit ◽  
Magnetomotive Force

Multi-phase motors have attracted increasing attention in fields seeking high reliability, such as electric vehicles, ships, and rail transit, as they exhibit advantages, such as high reliability and fault tolerance. In this study, we consider a 12-phase permanent magnet synchronous motor (PMSM). First, a mathematical model of the 12-phase PMSM in the static coordinate system is established and the model is simplified according to the constraint condition of neutral point isolation. Second, according to the principle of invariant magnetomotive force under normal and fault conditions, two optimal control strategies of winding current, i.e. maximum torque output (MTO) and minimum copper consumption (MCC), are proposed. For a single-phase open-circuit fault, two optimization methods are used to reconstruct the residual phase current, such that the motor can maintain normal torque output and exhibit lower torque ripple under the fault state. Finally, system simulation and experimental research are conducted; the results verify the accuracy and feasibility of the fault-tolerant control strategy of the 12-phase PMSM proposed in this paper.

The Implementation of Permanent Magnet Synchronous Motor Direct Torque Control

2013 ◽  
Vol 712-715 ◽  
pp. 2757-2760
Author(s):  
Jun Li Zhang ◽  
Yu Ren Li ◽  
Long Fei Fu ◽  
Fan Gao
Keyword(s):  
Coordinate System ◽  
Permanent Magnet ◽  
Control Method ◽  
Block Diagram ◽  
Permanent Magnet Synchronous Motor ◽  
Direct Torque Control ◽  
Torque Ripple ◽  
Synchronous Motor ◽  
Torque Control ◽  
Two Phase

In order to deeply understand the characteristics of the permanent magnet synchronous motor direct torque control method, its mathematical models were established in the two-phase stationary coordinate system, the two-phase synchronous rotating coordinate system, and x-y stator synchronous rotating coordinate system. The implementation process of direct torque control method in varied stator winding connection was analyzed in detail. In order to improve the speed and torque performance of the permanent magnet synchronous motor, the direct torque control block diagram and the space voltage vector selection table were given. Finally, the summary and outlook of reducing torque ripple in the permanent magnet synchronous motor direct torque control methods.

Sign in / Sign up

Export Citation Format

Share Document