scholarly journals Automobile Tires’ High-Carbon Steel Wire

Encyclopedia ◽  
2021 ◽  
Vol 1 (3) ◽  
pp. 859-870
Author(s):  
Marina Polyakova ◽  
Alexey Stolyarov

It is a well-known fact that to manufacture an automobile tire more than 200 different materials are used, including high-carbon steel wire. In order to withstand the affecting forces, the tire tread is reinforced with steel wire or other products such as ropes or strands. These ropes are called steel cord. Steel cord can be of different constructions. To ensure a good adhesive bond between the rubber of the tire and the steel cord, the cord is either brass-plated or bronzed. The reason brass or bronze is used is because copper, which is a part of these alloys, makes a high-strength chemical composition with sulfur in rubber. For steel cord, the high carbon steel is usually used at 0.70–0.95% C. This amount of carbon ensures the high strength of the steel cord. This kind of high-quality, unalloyed steel has a pearlitic structure which is designed for multi-pass drawing. To ensure the specified technical characteristics, modern metal reinforcing materials for automobile tires, metal cord and bead wire, must withstand, first of all, a high breaking load with a minimum running meter weight. At present, reinforcing materials of the strength range 2800–3200 MPa are increasingly used, the manufacture of which requires high-strength wire. The production of such wire requires the use of a workpiece with high carbon content, changing the drawing regimes, patenting, and other operations. At the same time, it is necessary to achieve a reduction in the cost of wire manufacturing. In this context, the development and implementation of competitive processes for the manufacture of high-quality, high-strength wire as a reinforcing material for automobile tires is an urgent task.

2007 ◽  
Vol 340-341 ◽  
pp. 683-688 ◽  
Author(s):  
Sang Kon Lee ◽  
Won Ho Hwang ◽  
Dae Cheol Ko ◽  
Byung Min Kim ◽  
Woo Sik Ko

High speed multi pass wet wire drawing has become very common for production of high carbon steel cord because of the increase in customer demand and production rates in real industrial fields. Although the wet wire drawing is preformed at a high speed usually above 1000 m/min, greater speed is required to improve productivity. However, in the high carbon steel wire drawing, the wire temperature rises greatly as the drawing speed increase. The excessive temperature rise makes the wire more brittle and finally leads to wire breaks. In this study, the variations in wire temperature during wet wire drawing process were investigated. A multi pass wet wire drawing process with 21 passes, which was used to produce steel cord, was redesigned by considering the increase in temperature. Through a wet wire drawing experiment, it was possible to increase the maximum final speed from 1000 m/min to 2000 m/min.


1986 ◽  
Vol 26 (12) ◽  
pp. 1059-1064 ◽  
Author(s):  
Yukio YAMAOKA ◽  
Kazuichi HAMADA ◽  
Hideyoshi TSUBONO ◽  
Heijiro KAWAKAMI ◽  
Yasuhiro OKI ◽  
...  

1967 ◽  
Vol 53 (11) ◽  
pp. 1342-1344
Author(s):  
Akira NAKAGAWA ◽  
Akihiro SUZUKI ◽  
Tadatsugu KISHIGAMI ◽  
Norio NAGAI

1990 ◽  
Vol 6 (4) ◽  
pp. 331-337 ◽  
Author(s):  
I. P. Kemp ◽  
G. Pollard ◽  
A. N. Bramley

Metals ◽  
2018 ◽  
Vol 8 (10) ◽  
pp. 792 ◽  
Author(s):  
Panos Efthymiadis ◽  
Khalid Nor

Laser welding of dissimilar high-strength steels was performed in this study for two different geometries, flat and circular samples with material thicknesses of 5 and 8 mm. The material combinations were a low carbon to a medium or high carbon steel. Three different welding systems were employed: a Nd:YAG, a CO2 and a fiber laser. The process stability was evaluated for all the experiments. The resulting full penetration welds were inspected for their surface quality at the top and bottom of the specimens. Cross sections were taken to investigate the resulting microstructures and the metallurgical defects of the welds, such as cracks and pores. Significant hardening occurred in the weld region and the highest hardness values occurred in the Heat Affected Zone (HAZ) of the high carbon steel. The occurrence of weld defects depends strongly on the component geometry. The resulting microstructures within the weld were also predicted using neural network-simulated Continuous Cooling Transformation (CCT) diagrams and predicted the occurrence of a mixture of microstructures, such as bainite, martensite and pearlite, depending on the material chemistry. The thermal fields were measured with thermocouples and revealed the strong influence of component geometry on the cooling rate which in term defines the microstructures forming in the weld and the occurring hardness.


Author(s):  
Keinosuke TAKEO ◽  
Kan-ichi MAEDA ◽  
Tadaoki KAMISE ◽  
Hitoshi IWATA ◽  
Yoshiaki SATOMI ◽  
...  

Sign in / Sign up

Export Citation Format

Share Document