scholarly journals Refining IKONOS DEM for Dehradun Region Using Photogrammetry Based DEM Editing Methods, Orthoimage Generation and Quality Assessment of Cartosat-1 DEM

2020 ◽  
Vol 5 (1) ◽  
pp. 3
Author(s):  
Ashutosh Bhardwaj ◽  
Kamal Jain ◽  
Rajat Subhra Chatterjee
Keyword(s):  
High Resolution ◽  
Large Scale ◽  
Digital Terrain Model ◽  
Optimal Number ◽  
Mean Difference ◽  
Surface Model ◽  
Difference Image ◽  
Polynomial Coefficients ◽  
Rational Polynomial ◽  
The Difference

The correct representation of the topography of terrain is an important requirement to generate photogrammetric products such as orthoimages and maps from high-resolution (HR) or very high-resolution (VHR) satellite datasets. The refining of the digital elevation model (DEM) for the generation of an orthoimage is a vital step with a direct effect on the final accuracy achieved in the orthoimages. The refined DEM has potential applications in various domains of earth sciences such as geomorphological analysis, flood inundation mapping, hydrological analysis, large-scale mapping in an urban environment, etc., impacting the resulting output accuracy. Manual editing is done in the presented study for the automatically generated DEM from IKONOS data consequent to the satellite triangulation with a root mean square error (RMSE) of 0.46, using the rational function model (RFM) and an optimal number of ground control points (GCPs). The RFM includes the rational polynomial coefficients (RPCs) to build the relation between image space and ground space. The automatically generated DEM initially represents the digital surface model (DSM), which is used to generate a digital terrain model (DTM) in this study for improving orthoimages for an area of approximately 100 km2. DSM frequently has errors due to mass points in hanging (floating) or digging, which need correction while generating DTM. The DTM assists in the removal of the geometric effects (errors) of ground relief present in the DEM (i.e., DSM here) while generating the orthoimages and thus improves the quality of orthoimages, especially in areas such as Dehradun that have highly undulating terrain with a large number of natural drainages. The difference image of reference, i.e., edited IKONOS DEM (now representing DTM) and automatically generated IKONOS DEM, i.e., DSM, has a mean difference of 1.421 m. The difference DEM (dDEM) for the reference IKONOS DEM and generated Cartosat-1 DEM at a 10 m posting interval (referred to as Carto10 DEM) results in a mean difference of 8.74 m.

scholarly journals PHOTOGRAMMETRIC PROCESSING USING ZY-3 SATELLITE IMAGERY

2015 ◽  
Vol XL-3/W2 ◽  
pp. 109-113 ◽  
Author(s):  
W. Kornus ◽  
A. Magariños ◽  
M. Pla ◽  
E. Soler ◽  
F. Perez
Keyword(s):  
High Resolution ◽  
Level Of Detail ◽  
Multispectral Image ◽  
Stereoscopic Vision ◽  
Surface Model ◽  
Pixel Size ◽  
Image Correction ◽  
North West ◽  
Polynomial Coefficients ◽  
Rational Polynomial

This paper evaluates the stereoscopic capacities of the Chinese sensor ZiYuan-3 (ZY-3) for the generation of photogrammetric products. The satellite was launched on January 9, 2012 and carries three high-resolution panchromatic cameras viewing in forward (22º), nadir (0º) and backward direction (-22º) and an infrared multi-spectral scanner (IRMSS), which is slightly looking forward (6º). The ground sampling distance (GSD) is 2.1m for the nadir image, 3.5m for the two oblique stereo images and 5.8m for the multispectral image. The evaluated ZY-3 imagery consists of a full set of threefold-stereo and a multi-spectral image covering an area of ca. 50km x 50km north-west of Barcelona, Spain. The complete photogrammetric processing chain was executed including image orientation, the generation of a digital surface model (DSM), radiometric image correction, pansharpening, orthoimage generation and digital stereo plotting. <br><br> All 4 images are oriented by estimating affine transformation parameters between observed and nominal RPC (rational polynomial coefficients) image positions of 17 ground control points (GCP) and a subsequent calculation of refined RPC. From 10 independent check points RMS errors of 2.2m, 2.0m and 2.7m in X, Y and H are obtained. Subsequently, a DSM of 5m grid spacing is generated fully automatically. A comparison with the Lidar data results in an overall DSM accuracy of approximately 3m. In moderate and flat terrain higher accuracies in the order of 2.5m and better are achieved. In a next step orthoimages from the high resolution nadir image and the multispectral image are generated using the refined RPC geometry and the DSM. After radiometric corrections a fused high resolution colour orthoimage with 2.1m pixel size is created using an adaptive HSL method. The pansharpen process is performed after the individual geocorrection due to the different viewing angles between the two images. In a detailed analysis of the colour orthoimage artifacts are detected covering an area of 4691ha, corresponding to less than 2% of the imaged area. Most of the artifacts are caused by clouds (4614ha). A minor part (77ha) is affected by colour patch, stripping or blooming effects. <br><br> For the final qualitative analysis on the usability of the ZY-3 imagery for stereo plotting purposes stereo combinations of the nadir and an oblique image are discarded, mainly due to the different pixel size, which produces difficulties in the stereoscopic vision and poor accuracy in positioning and measuring. With the two oblique images a level of detail equivalent to 1:25.000 scale is achieved for transport network, hydrography, vegetation and elements to model the terrain as break lines. For settlement, including buildings and other constructions a lower level of detail is achieved equivalent to 1:50.000 scale.

scholarly journals A DETAILED STUDY ABOUT DIGITAL SURFACE MODEL GENERATION USING HIGH RESOLUTION SATELLITE STEREO IMAGERY

2016 ◽  
Vol III-1 ◽  
pp. 69-76 ◽  
Author(s):  
K. Gong ◽  
D. Fritsch
Keyword(s):  
High Resolution ◽  
Stereo Matching ◽  
Research Area ◽  
Surface Model ◽  
Polynomial Coefficients ◽  
Rational Polynomial ◽  
Dense Stereo Matching ◽  
Stereo Imagery ◽  
Satellite Sensors ◽  
High Resolution Satellite Imagery

Photogrammetry is currently in a process of renaissance, caused by the development of dense stereo matching algorithms to provide very dense Digital Surface Models (DSMs). Moreover, satellite sensors have improved to provide sub-meter or even better Ground Sampling Distances (GSD) in recent years. Therefore, the generation of DSM from spaceborne stereo imagery becomes a vivid research area. This paper presents a comprehensive study about the DSM generation of high resolution satellite data and proposes several methods to implement the approach. The bias-compensated Rational Polynomial Coefficients (RPCs) Bundle Block Adjustment is applied to image orientation and the rectification of stereo scenes is realized based on the Project-Trajectory-Based Epipolarity (PTE) Model. Very dense DSMs are generated from WorldView-2 satellite stereo imagery using the dense image matching module of the C/C++ library LibTsgm. We carry out various tests to evaluate the quality of generated DSMs regarding robustness and precision. The results have verified that the presented pipeline of DSM generation from high resolution satellite imagery is applicable, reliable and very promising.

scholarly journals A DETAILED STUDY ABOUT DIGITAL SURFACE MODEL GENERATION USING HIGH RESOLUTION SATELLITE STEREO IMAGERY

2016 ◽  
Vol III-1 ◽  
pp. 69-76
Author(s):  
K. Gong ◽  
D. Fritsch
Keyword(s):  
High Resolution ◽  
Stereo Matching ◽  
Research Area ◽  
Surface Model ◽  
Polynomial Coefficients ◽  
Rational Polynomial ◽  
Dense Stereo Matching ◽  
Stereo Imagery ◽  
Satellite Sensors ◽  
High Resolution Satellite Imagery

Photogrammetry is currently in a process of renaissance, caused by the development of dense stereo matching algorithms to provide very dense Digital Surface Models (DSMs). Moreover, satellite sensors have improved to provide sub-meter or even better Ground Sampling Distances (GSD) in recent years. Therefore, the generation of DSM from spaceborne stereo imagery becomes a vivid research area. This paper presents a comprehensive study about the DSM generation of high resolution satellite data and proposes several methods to implement the approach. The bias-compensated Rational Polynomial Coefficients (RPCs) Bundle Block Adjustment is applied to image orientation and the rectification of stereo scenes is realized based on the Project-Trajectory-Based Epipolarity (PTE) Model. Very dense DSMs are generated from WorldView-2 satellite stereo imagery using the dense image matching module of the C/C++ library LibTsgm. We carry out various tests to evaluate the quality of generated DSMs regarding robustness and precision. The results have verified that the presented pipeline of DSM generation from high resolution satellite imagery is applicable, reliable and very promising.

scholarly journals Continuous high-resolution midlatitude-belt simulations for July–August 2013 with WRF

2017 ◽  
Vol 10 (5) ◽  
pp. 2031-2055 ◽  
Author(s):  
Thomas Schwitalla ◽  
Hans-Stefan Bauer ◽  
Volker Wulfmeyer ◽  
Kirsten Warrach-Sagi
Keyword(s):  
High Resolution ◽  
Land Surface ◽  
Large Scale ◽  
Temperature Fields ◽  
Surface Model ◽  
Limited Area ◽  
Data Set ◽  
Latitude Belt ◽  
Simulated Precipitation ◽  
The Impact

Abstract. Increasing computational resources and the demands of impact modelers, stake holders, and society envision seasonal and climate simulations with the convection-permitting resolution. So far such a resolution is only achieved with a limited-area model whose results are impacted by zonal and meridional boundaries. Here, we present the setup of a latitude-belt domain that reduces disturbances originating from the western and eastern boundaries and therefore allows for studying the impact of model resolution and physical parameterization. The Weather Research and Forecasting (WRF) model coupled to the NOAH land–surface model was operated during July and August 2013 at two different horizontal resolutions, namely 0.03 (HIRES) and 0.12° (LOWRES). Both simulations were forced by the European Centre for Medium-Range Weather Forecasts (ECMWF) operational analysis data at the northern and southern domain boundaries, and the high-resolution Operational Sea Surface Temperature and Sea Ice Analysis (OSTIA) data at the sea surface.The simulations are compared to the operational ECMWF analysis for the representation of large-scale features. To analyze the simulated precipitation, the operational ECMWF forecast, the CPC MORPHing (CMORPH), and the ENSEMBLES gridded observation precipitation data set (E-OBS) were used as references.Analyzing pressure, geopotential height, wind, and temperature fields as well as precipitation revealed (1) a benefit from the higher resolution concerning the reduction of monthly biases, root mean square error, and an improved Pearson skill score, and (2) deficiencies in the physical parameterizations leading to notable biases in distinct regions like the polar Atlantic for the LOWRES simulation, the North Pacific, and Inner Mongolia for both resolutions.In summary, the application of a latitude belt on a convection-permitting resolution shows promising results that are beneficial for future seasonal forecasting.

Impact of an Exponential Profile of Saturated Hydraulic Conductivity within the ISBA LSM: Simulations over the Rhône Basin

2006 ◽  
Vol 7 (1) ◽  
pp. 61-80 ◽  
Author(s):  
B. Decharme ◽  
H. Douville ◽  
A. Boone ◽  
F. Habets ◽  
J. Noilhan
Keyword(s):  
High Resolution ◽  
Hydraulic Conductivity ◽  
Land Surface ◽  
Large Scale ◽  
Saturated Hydraulic Conductivity ◽  
Rooting Depth ◽  
Surface Model ◽  
Low Resolution ◽  
The Impact ◽  
Hydrological Applications

Abstract This study focuses on the influence of an exponential profile of saturated hydraulic conductivity, ksat, with soil depth on the water budget simulated by the Interaction Soil Biosphere Atmosphere (ISBA) land surface model over the French Rhône River basin. With this exponential profile, the saturated hydraulic conductivity at the surface increases by approximately a factor of 10, and its mean value increases in the root zone and decreases in the deeper region of the soil in comparison with the values given by Clapp and Hornberger. This new version of ISBA is compared to the original version in offline simulations using the Rhône-Aggregation high-resolution database. Low-resolution simulations, where all atmospheric data and surface parameters have been aggregated, are also performed to test the impact of the modified ksat profile at the typical scale of a climate model. The simulated discharges are compared to observations from a dense network consisting of 88 gauging stations. Results of the high-resolution experiments show that the exponential profile of ksat globally improves the simulated discharges and that the assumption of an increase in saturated hydraulic conductivity from the soil surface to a depth close to the rooting depth in comparison with values given by Clapp and Hornberger is reasonable. Results of the scaling experiments indicate that this parameterization is also suitable for large-scale hydrological applications. Nevertheless, low-resolution simulations with both model versions overestimate evapotranspiration (especially from the plant transpiration and the wet fraction of the canopy) to the detriment of total runoff, which emphasizes the need for implementing subgrid distribution of precipitation and land surface properties in large-scale hydrological applications.

scholarly journals Estimating Pasture Biomass and Canopy Height in Brazilian Savanna Using UAV Photogrammetry

2019 ◽  
Vol 11 (20) ◽  
pp. 2447 ◽  
Author(s):  
Juliana Batistoti ◽  
José Marcato Junior ◽  
Luís Ítavo ◽  
Edson Matsubara ◽  
Eva Gomes ◽  
...  
Keyword(s):  
Digital Terrain Model ◽  
Technical Note ◽  
Canopy Height ◽  
Brazilian Savanna ◽  
Surface Model ◽  
Panicum Maximum ◽  
Ground Sample ◽  
Terrain Model ◽  
Sampling Height ◽  
The Difference

The Brazilian territory contains approximately 160 million hectares of pastures, and it is necessary to develop techniques to automate their management and increase their production. This technical note has two objectives: First, to estimate the canopy height using unmanned aerial vehicle (UAV) photogrammetry; second, to propose an equation for the estimation of biomass of Brazilian savanna (Cerrado) pastures based on UAV canopy height. Four experimental units of Panicum maximum cv. BRS Tamani were evaluated. Herbage mass sampling, height measurements, and UAV image collection were simultaneously performed. The UAVs were flown at a height of 50 m, and images were generated with a mean ground sample distance (GSD) of approximately 1.55 cm. The forage canopy height estimated by UAVs was calculated as the difference between the digital surface model (DSM) and the digital terrain model (DTM). The R2 between ruler height and UAV height was 0.80; between biomass (kg ha−1 GB—green biomass) and ruler height, 0.81; and between biomass (kg ha−1 GB) and UAV height, 0.74. UAV photogrammetry proved to be a potential technique to estimate height and biomass in Brazilian Panicum maximum cv. BRS Tamani pastures located in the endangered Brazilian savanna (Cerrado) biome.

scholarly journals RPC STEREO PROCESSOR (RSP) – A SOFTWARE PACKAGE FOR DIGITAL SURFACE MODEL AND ORTHOPHOTO GENERATION FROM SATELLITE STEREO IMAGERY

2016 ◽  
Vol III-1 ◽  
pp. 77-82 ◽  
Author(s):  
R. Qin
Keyword(s):  
Software Package ◽  
Large Scale ◽  
Surface Model ◽  
Matching Methods ◽  
Sensing Applications ◽  
Rational Polynomial ◽  
Stereo Imagery ◽  
Global Matching ◽  
Commercial Purpose ◽  
Matching Strategy

Large-scale Digital Surface Models (DSM) are very useful for many geoscience and urban applications. Recently developed dense image matching methods have popularized the use of image-based very high resolution DSM. Many commercial/public tools that implement matching methods are available for perspective images, but there are rare handy tools for satellite stereo images. In this paper, a software package, RPC (rational polynomial coefficient) stereo processor (RSP), is introduced for this purpose. RSP implements a full pipeline of DSM and orthophoto generation based on RPC modelled satellite imagery (level 1+), including level 2 rectification, geo-referencing, point cloud generation, pan-sharpen, DSM resampling and ortho-rectification. A modified hierarchical semi-global matching method is used as the current matching strategy. Due to its high memory efficiency and optimized implementation, RSP can be used in normal PC to produce large format DSM and orthophotos. This tool was developed for internal use, and may be acquired by researchers for academic and non-commercial purpose to promote the 3D remote sensing applications.

scholarly journals PROBLEMS AND LIMITATIONS OF SATELLITE IMAGE ORIENTATION FOR DETERMINATION OF HEIGHT MODELS

2017 ◽  
Vol XLII-1/W1 ◽  
pp. 257-264 ◽  
Author(s):  
K. Jacobsen
Keyword(s):  
Bias Correction ◽  
Satellite Image ◽  
Surface Model ◽  
Negative Effects ◽  
3 Dimensional ◽  
Polynomial Coefficients ◽  
Rational Polynomial ◽  
Sensor Orientation ◽  
Image Orientation ◽  
Linear Trends

The usual satellite image orientation is based on bias corrected rational polynomial coefficients (RPC). The RPC are describing the direct sensor orientation of the satellite images. The locations of the projection centres today are without problems, but an accuracy limit is caused by the attitudes. Very high resolution satellites today are very agile, able to change the pointed area over 200km within 10 to 11 seconds. The corresponding fast attitude acceleration of the satellite may cause a jitter which cannot be expressed by the third order RPC, even if it is recorded by the gyros. Only a correction of the image geometry may help, but usually this will not be done. The first indication of jitter problems is shown by systematic errors of the y-parallaxes (py) for the intersection of corresponding points during the computation of ground coordinates. These y-parallaxes have a limited influence to the ground coordinates, but similar problems can be expected for the x-parallaxes, determining directly the object height. Systematic y-parallaxes are shown for Ziyuan-3 (ZY3), WorldView-2 (WV2), Pleiades, Cartosat-1, IKONOS and GeoEye. Some of them have clear jitter effects. In addition linear trends of py can be seen. Linear trends in py and tilts in of computed height models may be caused by limited accuracy of the attitude registration, but also by bias correction with affinity transformation. The bias correction is based on ground control points (GCPs). The accuracy of the GCPs usually does not cause some limitations but the identification of the GCPs in the images may be difficult. With 2-dimensional bias corrected RPC-orientation by affinity transformation tilts of the generated height models may be caused, but due to large affine image deformations some satellites, as Cartosat-1, have to be handled with bias correction by affinity transformation. Instead of a 2-dimensional RPC-orientation also a 3-dimensional orientation is possible, respecting the object height more as by 2-dimensional orientation. The 3-dimensional orientation showed advantages for orientation based on a limited number of GCPs, but in case of poor GCP distribution it may cause also negative effects. For some of the used satellites the bias correction by affinity transformation showed advantages, but for some other the bias correction by shift was leading to a better levelling of the generated height models, even if the root mean square (RMS) differences at the GCPs were larger as for bias correction by affinity transformation. <br><br> The generated height models can be analyzed and corrected with reference height models. For the used data sets accurate reference height models are available, but an analysis and correction with the free of charge available SRTM digital surface model (DSM) or ALOS World 3D (AW3D30) is also possible and leads to similar results. The comparison of the generated height models with the reference DSM shows some height undulations, but the major accuracy influence is caused by tilts of the height models. Some height model undulations reach up to 50&amp;thinsp;% of the ground sampling distance (GSD), this is not negligible but it cannot be seen not so much at the standard deviations of the height. In any case an improvement of the generated height models is possible with reference height models. If such corrections are applied it compensates possible negative effects of the type of bias correction or 2-dimensional orientations against 3-dimensional handling.

Assimilating the SCATSAR-SWI with SURFEX for a high-resolution European soil moisture product

2020 ◽  
Author(s):  
Jasmin Vural ◽  
Stefan Schneider ◽  
Bernhard Bauer-Marschallinger ◽  
Klaus Haslinger
Keyword(s):  
Soil Moisture ◽  
High Resolution ◽  
Large Scale ◽  
Water Cycle ◽  
Lower Atmosphere ◽  
Surface Model ◽  
Moisture Analysis ◽  
Diffusion Scheme ◽  
Nwp Model ◽  
High Level

&lt;p&gt;Due to manifold land-atmosphere interactions, soil moisture is an essential part of the energy-water cycle. Especially when the incoming solar radiation is high, large effects of soil moisture onto the lower atmosphere can be expected. In addition, the knowledge of large-scale soil moisture fields is important for other applications, e.g., in hydrology and agriculture. Remotely sensed soil moisture products provide information on global scales, continuously yielding better quality as well as higher spatial and temporal resolution. The ingestion into data assimilation systems propagates the obtained information in time and &amp;#8211; via subsequent modelling &amp;#8211; onto other physical variables.&lt;/p&gt;&lt;p&gt;By the assimilation of a high-resolution soil moisture product, we aim to develop a high-level soil-moisture product for Europe and to provide an improved surface initialisation for the NWP model AROME. Our focus is on fully exploiting the high spatial resolution (1 km) of the multi-layer fused soil-moisture product SCATSAR-SWI. For assimilation, we use the surface model SURFEX, which employs a simplified Extended Kalman Filter and the multi-layer diffusion scheme ISBA-DIF. We ran the assimilation system on different resolutions and found an improvement of the forecast metrics of the 2 m temperature and 2m relative humidity using higher resolution systems. In addition, we use the water balance as a reference measure for a domain-covering verification of the soil moisture analysis.&lt;/p&gt;

Sign in / Sign up

Export Citation Format

Share Document