Assimilating the SCATSAR-SWI with SURFEX for a high-resolution European soil moisture product

2020 ◽  
Author(s):  
Jasmin Vural ◽  
Stefan Schneider ◽  
Bernhard Bauer-Marschallinger ◽  
Klaus Haslinger
Keyword(s):  
Soil Moisture ◽  
High Resolution ◽  
Large Scale ◽  
Water Cycle ◽  
Lower Atmosphere ◽  
Surface Model ◽  
Moisture Analysis ◽  
Diffusion Scheme ◽  
Nwp Model ◽  
High Level

<p>Due to manifold land-atmosphere interactions, soil moisture is an essential part of the energy-water cycle. Especially when the incoming solar radiation is high, large effects of soil moisture onto the lower atmosphere can be expected. In addition, the knowledge of large-scale soil moisture fields is important for other applications, e.g., in hydrology and agriculture. Remotely sensed soil moisture products provide information on global scales, continuously yielding better quality as well as higher spatial and temporal resolution. The ingestion into data assimilation systems propagates the obtained information in time and – via subsequent modelling – onto other physical variables.</p><p>By the assimilation of a high-resolution soil moisture product, we aim to develop a high-level soil-moisture product for Europe and to provide an improved surface initialisation for the NWP model AROME. Our focus is on fully exploiting the high spatial resolution (1 km) of the multi-layer fused soil-moisture product SCATSAR-SWI. For assimilation, we use the surface model SURFEX, which employs a simplified Extended Kalman Filter and the multi-layer diffusion scheme ISBA-DIF. We ran the assimilation system on different resolutions and found an improvement of the forecast metrics of the 2 m temperature and 2m relative humidity using higher resolution systems. In addition, we use the water balance as a reference measure for a domain-covering verification of the soil moisture analysis.</p>

scholarly journals Assimilation of the SCATSAR-SWI with SURFEX: Impact of local observation errors in Austria

2020 ◽  
Author(s):  
Jasmin Vural ◽  
Stefan Schneider ◽  
Bernhard Bauer-Marschallinger ◽  
Klaus Haslinger
Keyword(s):  
Soil Moisture ◽  
Data Assimilation ◽  
Surface Model ◽  
Local Error ◽  
Observation Error ◽  
Water Index ◽  
Nwp Model ◽  
High Level ◽  
The Impact ◽  
Assimilation System

AbstractThe proper determination of soil moisture on different scales is important for applications in a variety of fields. We aim to develop a high-level soil moisture product with high temporal and spatial resolution by assimilating the multilayer soil moisture product SCATSAR-SWI (Scatterometer Synthetic Aperture Radar Soil Water Index) into the surface model SURFEX. In addition, we probe the impact of the findings on the NumericalWeather Prediction (NWP) in Austria. The data assimilation system consists of the NWP model AROME and the SURFEX Offline Data Assimilation, which provide atmospheric forcing and soil moisture fields as mutual input. To address the known sensitivity of the employed simplified Extended Kalman Filter to the specification of errors, we compute the observation error variances of the SCATSAR-SWI locally using Triple Collocation Analysis and implement them into the assimilation system. The verification of the forecasted 2 m temperature and relative humidity against measurements of Austrian weather stations shows that the actual impact of the local error approach on the atmospheric forecast is slightly positive to neutral compared to the standard error approach, depending on the time of the year. The direct verification of the soil moisture analysis against a gridded water balance product reveals a degradation of the unbiased root mean square error for small observation errors.

scholarly journals Continuous high-resolution midlatitude-belt simulations for July–August 2013 with WRF

2017 ◽  
Vol 10 (5) ◽  
pp. 2031-2055 ◽  
Author(s):  
Thomas Schwitalla ◽  
Hans-Stefan Bauer ◽  
Volker Wulfmeyer ◽  
Kirsten Warrach-Sagi
Keyword(s):  
High Resolution ◽  
Land Surface ◽  
Large Scale ◽  
Temperature Fields ◽  
Surface Model ◽  
Limited Area ◽  
Data Set ◽  
Latitude Belt ◽  
Simulated Precipitation ◽  
The Impact

Abstract. Increasing computational resources and the demands of impact modelers, stake holders, and society envision seasonal and climate simulations with the convection-permitting resolution. So far such a resolution is only achieved with a limited-area model whose results are impacted by zonal and meridional boundaries. Here, we present the setup of a latitude-belt domain that reduces disturbances originating from the western and eastern boundaries and therefore allows for studying the impact of model resolution and physical parameterization. The Weather Research and Forecasting (WRF) model coupled to the NOAH land–surface model was operated during July and August 2013 at two different horizontal resolutions, namely 0.03 (HIRES) and 0.12° (LOWRES). Both simulations were forced by the European Centre for Medium-Range Weather Forecasts (ECMWF) operational analysis data at the northern and southern domain boundaries, and the high-resolution Operational Sea Surface Temperature and Sea Ice Analysis (OSTIA) data at the sea surface.The simulations are compared to the operational ECMWF analysis for the representation of large-scale features. To analyze the simulated precipitation, the operational ECMWF forecast, the CPC MORPHing (CMORPH), and the ENSEMBLES gridded observation precipitation data set (E-OBS) were used as references.Analyzing pressure, geopotential height, wind, and temperature fields as well as precipitation revealed (1) a benefit from the higher resolution concerning the reduction of monthly biases, root mean square error, and an improved Pearson skill score, and (2) deficiencies in the physical parameterizations leading to notable biases in distinct regions like the polar Atlantic for the LOWRES simulation, the North Pacific, and Inner Mongolia for both resolutions.In summary, the application of a latitude belt on a convection-permitting resolution shows promising results that are beneficial for future seasonal forecasting.

scholarly journals Presentation and discussion of the high resolution atmosphere-land surface subsurface simulation dataset of the virtual Neckar catchment for the period 2007–2015

2020 ◽  
Author(s):  
Bernd Schalge ◽  
Gabriele Baroni ◽  
Barbara Haese ◽  
Daniel Erdal ◽  
Gernot Geppert ◽  
...  
Keyword(s):  
High Resolution ◽  
Land Surface ◽  
Overland Flow ◽  
Water Cycle ◽  
Numerical Models ◽  
Model Performance ◽  
Surface Model ◽  
Meteorological Model ◽  
The Real ◽  
Terrestrial System

Abstract. Coupled numerical models, which simulate water and energy fluxes in the subsurface-land surface-atmosphere system in a physically consistent way are a prerequisite for the analysis and a better understanding of heat and matter exchange fluxes at compartmental boundaries and interdependencies of states across these boundaries. Complete state evolutions generated by such models may be regarded as a proxy of the real world, provided they are run at sufficiently high resolution and incorporate the most important processes. Such a virtual reality can be used to test hypotheses on the functioning of the coupled terrestrial system. Coupled simulation systems, however, face severe problems caused by the vastly different scales of the processes acting in and between the compartments of the terrestrial system, which also hinders comprehensive tests of their realism. We used the Terrestrial Systems Modeling Platform TerrSysMP, which couples the meteorological model COSMO, the land-surface model CLM, and the subsurface model ParFlow, to generate a virtual catchment for a regional terrestrial system mimicking the Neckar catchment in southwest Germany. Simulations for this catchment are made for the period 2007–2015, and at a spatial resolution of 400 m for the land surface and subsurface and 1.1 km for the atmosphere. Among a discussion of modelling challenges, the model performance is evaluated based on real observations covering several variables of the water cycle. We find that the simulated (virtual) catchment behaves in many aspects quite close to observations of the real Neckar catchment, e.g. concerning atmospheric boundary-layer height, precipitation, and runoff. But also discrepancies become apparent, both in the ability of the model to correctly simulate some processes which still need improvement such as overland flow, and in the realism of some observation operators like the satellite based soil moisture sensors. The whole raw dataset is available for interested users. The dataset described here is available via the CERA database (Schalge et al., 2020): https://doi.org/10.26050/WDCC/Neckar_VCS_v1.

scholarly journals Using data assimilation to optimize pedotransfer functions using large-scale in-situ soil moisture observations

2020 ◽  
Author(s):  
Elizabeth Cooper ◽  
Eleanor Blyth ◽  
Hollie Cooper ◽  
Rich Ellis ◽  
Ewan Pinnington ◽  
...  
Keyword(s):  
Soil Moisture ◽  
Data Assimilation ◽  
Land Surface ◽  
Large Scale ◽  
Pedotransfer Functions ◽  
Surface Model ◽  
Climate Projections ◽  
Land Surface Models ◽  
Surface Models

Abstract. Soil moisture predictions from land surface models are important in hydrological, ecological and meteorological applications. In recent years the availability of wide-area soil-moisture measurements has increased, but few studies have combined model-based soil moisture predictions with in-situ observations beyond the point scale. Here we show that we can markedly improve soil moisture estimates from the JULES land surface model using field scale observations and data assimilation techniques. Rather than directly updating soil moisture estimates towards observed values, we optimize constants in the underlying pedotransfer functions, which relate soil texture to JULES soil physics parameters. In this way we generate a single set of newly calibrated pedotransfer functions based on observations from a number of UK sites with different soil textures. We demonstrate that calibrating a pedotransfer function in this way can improve the performance of land surface models, leading to the potential for better flood, drought and climate projections.

scholarly journals Comparative Analysis of High-Resolution Soil Moisture Simulations from the Soil, Vegetation, and Snow (SVS) Land Surface Model Using SAR Imagery Over Bare Soil

Water ◽  
2019 ◽  
Vol 11 (3) ◽  
pp. 542 ◽  
Author(s):  
Mohammed Dabboor ◽  
Leqiang Sun ◽  
Marco Carrera ◽  
Matthew Friesen ◽  
Amine Merzouki ◽  
...  
Keyword(s):  
Soil Moisture ◽  
High Resolution ◽  
Soil Texture ◽  
Land Surface ◽  
Goodness Of Fit ◽  
Retrieval Algorithm ◽  
Surface Model ◽  
Land Surface Scheme ◽  
Sar Imagery ◽  
Surface Scheme

Soil moisture is a key variable in Earth systems, controlling the exchange of water andenergy between land and atmosphere. Thus, understanding its spatiotemporal distribution andvariability is important. Environment and Climate Change Canada (ECCC) has developed a newland surface parameterization, named the Soil, Vegetation, and Snow (SVS) scheme. The SVS landsurface scheme features sophisticated parameterizations of hydrological processes, including watertransport through the soil. It has been shown to provide more accurate simulations of the temporaland spatial distribution of soil moisture compared to the current operational land surface scheme.Simulation of high resolution soil moisture at the field scale remains a challenge. In this study, wesimulate soil moisture maps at a spatial resolution of 100 m using the SVS land surface scheme overan experimental site located in Manitoba, Canada. Hourly high resolution soil moisture maps wereproduced between May and November 2015. Simulated soil moisture values were compared withestimated soil moisture values using a hybrid retrieval algorithm developed at Agriculture andAgri-Food Canada (AAFC) for soil moisture estimation using RADARSAT-2 Synthetic ApertureRadar (SAR) imagery. Statistical analysis of the results showed an overall promising performanceof the SVS land surface scheme in simulating soil moisture values at high resolution scale.Investigation of the SVS output was conducted both independently of the soil texture, and as afunction of the soil texture. The SVS model tends to perform slightly better over coarser texturedsoils (sandy loam, fine sand) than finer textured soils (clays). Correlation values of the simulatedSVS soil moisture and the retrieved SAR soil moisture lie between 0.753–0.860 over sand and 0.676-0.865 over clay, with goodness of fit values between 0.567–0.739 and 0.457–0.748, respectively. TheRoot Mean Square Difference (RMSD) values range between 0.058–0.062 over sand and 0.055–0.113over clay, with a maximum absolute bias of 0.049 and 0.094 over sand and clay, respectively. Theunbiased RMSD values lie between 0.038–0.057 over sand and 0.039–0.064 over clay. Furthermore,results show an Index of Agreement (IA) between the simulated and the derived soil moisturealways higher than 0.90.

Impact of an Exponential Profile of Saturated Hydraulic Conductivity within the ISBA LSM: Simulations over the Rhône Basin

2006 ◽  
Vol 7 (1) ◽  
pp. 61-80 ◽  
Author(s):  
B. Decharme ◽  
H. Douville ◽  
A. Boone ◽  
F. Habets ◽  
J. Noilhan
Keyword(s):  
High Resolution ◽  
Hydraulic Conductivity ◽  
Land Surface ◽  
Large Scale ◽  
Saturated Hydraulic Conductivity ◽  
Rooting Depth ◽  
Surface Model ◽  
Low Resolution ◽  
The Impact ◽  
Hydrological Applications

Abstract This study focuses on the influence of an exponential profile of saturated hydraulic conductivity, ksat, with soil depth on the water budget simulated by the Interaction Soil Biosphere Atmosphere (ISBA) land surface model over the French Rhône River basin. With this exponential profile, the saturated hydraulic conductivity at the surface increases by approximately a factor of 10, and its mean value increases in the root zone and decreases in the deeper region of the soil in comparison with the values given by Clapp and Hornberger. This new version of ISBA is compared to the original version in offline simulations using the Rhône-Aggregation high-resolution database. Low-resolution simulations, where all atmospheric data and surface parameters have been aggregated, are also performed to test the impact of the modified ksat profile at the typical scale of a climate model. The simulated discharges are compared to observations from a dense network consisting of 88 gauging stations. Results of the high-resolution experiments show that the exponential profile of ksat globally improves the simulated discharges and that the assumption of an increase in saturated hydraulic conductivity from the soil surface to a depth close to the rooting depth in comparison with values given by Clapp and Hornberger is reasonable. Results of the scaling experiments indicate that this parameterization is also suitable for large-scale hydrological applications. Nevertheless, low-resolution simulations with both model versions overestimate evapotranspiration (especially from the plant transpiration and the wet fraction of the canopy) to the detriment of total runoff, which emphasizes the need for implementing subgrid distribution of precipitation and land surface properties in large-scale hydrological applications.

scholarly journals How Are Spring Snow Conditions in Central Canada Related to Early Warm-Season Precipitation?

2013 ◽  
Vol 14 (3) ◽  
pp. 787-807 ◽  
Author(s):  
Hua Su ◽  
Robert E. Dickinson ◽  
Kirsten L. Findell ◽  
Benjamin R. Lintner
Keyword(s):  
Soil Moisture ◽  
Snow Depth ◽  
Large Scale ◽  
Spatial Scales ◽  
Warm Season ◽  
Surface Model ◽  
Central Canada ◽  
Snow Conditions ◽  
Snow Precipitation ◽  
Soil Moisture Anomaly

Abstract The response of the warm-season atmosphere to antecedent snow anomalies has long been an area of study. This paper explores how the spring snow depth relates to subsequent precipitation in central Canada using ground observations, reanalysis datasets, and offline land surface model estimates. After removal of low-frequency ocean influences, April snow depth is found to correlate negatively with early warm-season (May–June) precipitation across a large portion of the study area. A chain of mechanisms is hypothesized to account for this observed negative relation: 1) a snow depth anomaly leads to a soil moisture anomaly, 2) the subsequent soil moisture anomaly affects ground turbulent fluxes, and 3) the atmospheric vertical structure allows dry soil to promote local convection. A detailed analysis supports this chain of mechanisms for those portions of the domain manifesting a statistically significant negative snow–precipitation correlation. For a portion of the study area, large-scale atmospheric circulation patterns also affect the early warm-season rainfall, indicating that the snow–precipitation feedback may depend on large-scale atmospheric dynamical features. This analysis suggests that spring snow conditions can contribute to warm-season precipitation predictability on a subseasonal to seasonal scale, but that the strength of such predictability varies geographically as it depends on the interplay of hydroclimatological conditions across multiple spatial scales.

scholarly journals Toward a Surface Soil Moisture Product at High Spatiotemporal Resolution: Temporally Interpolated, Spatially Disaggregated SMOS Data

2018 ◽  
Vol 19 (1) ◽  
pp. 183-200 ◽  
Author(s):  
Y. Malbéteau ◽  
O. Merlin ◽  
G. Balsamo ◽  
S. Er-Raki ◽  
S. Khabba ◽  
...  
Keyword(s):  
Soil Moisture ◽  
Temporal Resolution ◽  
Land Surface ◽  
Large Scale ◽  
Surface Soil ◽  
Land Surface Model ◽  
Open Loop ◽  
Surface Model ◽  
Surface Soil Moisture ◽  
Spatiotemporal Resolution

Abstract High spatial and temporal resolution surface soil moisture is required for most hydrological and agricultural applications. The recently developed Disaggregation based on Physical and Theoretical Scale Change (DisPATCh) algorithm provides 1-km-resolution surface soil moisture by downscaling the 40-km Soil Moisture Ocean Salinity (SMOS) soil moisture using Moderate Resolution Imaging Spectroradiometer (MODIS) data. However, the temporal resolution of DisPATCh data is constrained by the temporal resolution of SMOS (a global coverage every 3 days) and further limited by gaps in MODIS images due to cloud cover. This paper proposes an approach to overcome these limitations based on the assimilation of the 1-km-resolution DisPATCh data into a simple dynamic soil model forced by (inaccurate) precipitation data. The performance of the approach was assessed using ground measurements of surface soil moisture in the Yanco area in Australia and the Tensift-Haouz region in Morocco during 2014. It was found that the analyzed daily 1-km-resolution surface soil moisture compared slightly better to in situ data for all sites than the original disaggregated soil moisture products. Over the entire year, assimilation increased the correlation coefficient between estimated soil moisture and ground measurements from 0.53 to 0.70, whereas the mean unbiased RMSE (ubRMSE) slightly decreased from 0.07 to 0.06 m3 m−3 compared to the open-loop force–restore model. The proposed assimilation scheme has significant potential for large-scale applications over semiarid areas, since the method is based on data available at the global scale together with a parsimonious land surface model.

scholarly journals Assimilation of SMOS brightness temperature into a large-scale distributed conceptual hydrological model

2019 ◽  
Author(s):  
Renaud Hostache ◽  
Dominik Rains ◽  
Kaniska Mallick ◽  
Marco Chini ◽  
Ramona Pelich ◽  
...  
Keyword(s):  
Soil Moisture ◽  
Brightness Temperature ◽  
Land Surface ◽  
Large Scale ◽  
Hydrological Model ◽  
Land Surface Model ◽  
Surface Model ◽  
Meteorological Model ◽  
Temperature Observations

Abstract. The main objective of this study is to investigate how brightness temperature observations from satellite microwave sensors may help in reducing errors and uncertainties in soil moisture simulations with a large-scale conceptual hydro-meteorological model. In particular, we use as forcings the ERA-Interim public dataset and we couple the CMEM radiative transfer model with a hydro-meteorological model enabling therefore soil moisture and SMOS-like brightness temperature simulations. The hydro-meteorological model is configured using recent developments of the SUPERFLEX framework, which enables tailoring the model structure to the specific needs of the application as well as to data availability and computational requirements. In this case, the model spatial resolution is adapted to the spatial grid of the satellite data, and the soil stratification is tailored to the satellite datasets to be assimilated and the forcing data. The hydrological model is first calibrated using a sample of SMOS brightness temperature observations (period 2010–2011). Next, SMOS-derived brightness temperature observations are sequentially assimilated into the coupled SUPERFLEX-CMEM model (period 2010–2015). For this experiment, a Local Ensemble Transform Kalman Filter is used and the meteorological forcings (ERA interim-based rainfall, air and soil temperature) are perturbed to generate a background ensemble. Each time a SMOS observation is available, the SUPERFLEX state variables related to the water content in the various soil layers are updated and the model simulations are resumed until the next SMOS observation becomes available. Our empirical results show that the SUPERFLEX-CMEM modelling chain is capable of predicting soil moisture at a performance level similar to that obtained for the same study area and with a quasi-identical experimental set up using the CLM land surface model. This shows that a simple model, when carefully calibrated, can yield performance level similar to that of a much more complex model. The correlation between simulated and in situ observed soil moisture ranges from 0.62 to 0.72. The assimilation of SMOS brightness temperature observation into the SUPERFLEX-CMEM modelling chain improves the correlation between predicted and in situ observed soil moisture by 0.03 on average showing improvements similar to those obtained using the CLM land surface model.

scholarly journals High-resolution drought simulations and comparison to soil moisture observations in Germany

2021 ◽  
Author(s):  
Friedrich Boeing ◽  
Oldrich Rakovech ◽  
Rohini Kumar ◽  
Luis Samaniego ◽  
Martin Schrön ◽  
...  
Keyword(s):  
Soil Moisture ◽  
Information Systems ◽  
High Resolution ◽  
Water Cycle ◽  
Cosmic Ray ◽  
Vegetation Period ◽  
Moisture Index ◽  
Distributed Sensor ◽  
Local Risk ◽  
The One

Abstract. The 2018–2020 consecutive drought events in Germany resulted in impacts related with several sectors such as agriculture, forestry, water management, industry, energy production and transport. A major national operational drought information system is the German Drought Monitor (GDM), launched in 2014. It provides daily soil moisture (SM) simulated with the mesoscale hydrological model (mHM) and its related soil moisture index at a spatial resolution of 4 × 4 km2. Key to preparedness for extreme drought events are high-resolution information systems. The release of the new soil map BUEK200 allowed to increase the model resolution to ~1.2 × 1.2 km2, which is used in the second version of the GDM. In this paper, we explore the ability to provide drought information on the one-kilometer scale in Germany. Therefore, we compare simulated SM dynamics using homogenized and deseasonalized SM observations to evaluate the high-resolution drought simulations of the GDM. These SM observations are obtained from single profile measurements, spatially distributed sensor networks, cosmic-ray neutron stations and lysimeters at 40 sites in Germany. The results show that the agreement of simulated and observed SM dynamics is especially high in the vegetation period (0.84 median correlation R) and lower in winter (0.59 median R). Lower agreement in winter results from methodological uncertainties in simulations as well as in observations. Moderate but significant improvements between the first and second GDM version to observed SM were found in correlations for autumn (+0.07 median R) and winter (+0.12 median R). The annual drought intensity ranking and the spatial structure of drought events over the past 69 years is comparable for the two GDM versions. However, the higher resolution of the second GDM version allows a much more detailed representation of the spatial variability of SM, which is particularly beneficial for local risk assessments. Furthermore, the results underline that nationwide drought information systems depend both on appropriate simulations of the water cycle and a broad, high-quality observational soil moisture database.

Sign in / Sign up

Export Citation Format

Share Document