scholarly journals Processing Laser Point Cloud in Fully Mechanized Mining Face Based on DGCNN

2021 ◽  
Vol 10 (7) ◽  
pp. 482
Author(s):  
Zhizhong Xing ◽  
Shuanfeng Zhao ◽  
Wei Guo ◽  
Xiaojun Guo ◽  
Yuan Wang
Keyword(s):  
Feature Extraction ◽  
Point Cloud ◽  
Spatial Information ◽  
Direct Method ◽  
Point Clouds ◽  
Geometric Features ◽  
Point Cloud Data ◽  
Mining Equipment ◽  
Cloud Data ◽  
Mining Face

Point cloud data can accurately and intuitively reflect the spatial relationship between the coal wall and underground fully mechanized mining equipment. However, the indirect method of point cloud feature extraction based on deep neural networks will lose some of the spatial information of the point cloud, while the direct method will lose some of the local information of the point cloud. Therefore, we propose the use of dynamic graph convolution neural network (DGCNN) to extract the geometric features of the sphere in the point cloud of the fully mechanized mining face (FMMF) in order to obtain the position of the sphere (marker) in the point cloud of the FMMF, thus providing a direct basis for the subsequent transformation of the FMMF coordinates to the national geodetic coordinates with the sphere as the intermediate medium. Firstly, we completed the production of a diversity sphere point cloud (training set) and an FMMF point cloud (test set). Secondly, we further improved the DGCNN to enhance the effect of extracting the geometric features of the sphere in the FMMF. Finally, we compared the effect of the improved DGCNN with that of PointNet and PointNet++. The results show the correctness and feasibility of using DGCNN to extract the geometric features of point clouds in the FMMF and provide a new method for the feature extraction of point clouds in the FMMF. At the same time, the results provide a direct early guarantee for analyzing the point cloud data of the FMMF under the national geodetic coordinate system in the future. This can provide an effective basis for the straightening and inclining adjustment of scraper conveyors, and it is of great significance for the transparent, unmanned, and intelligent mining of the FMMF.

scholarly journals Feature Extraction from 3D Point Cloud Data Based on Discrete Curves

2013 ◽  
Vol 2013 ◽  
pp. 1-19 ◽  
Author(s):  
Yi An ◽  
Zhuohan Li ◽  
Cheng Shao
Keyword(s):  
Feature Extraction ◽  
Autonomous Navigation ◽  
Point Cloud ◽  
Geometric Features ◽  
3D Point Cloud ◽  
Point Cloud Data ◽  
Principal Curvatures ◽  
Cloud Data ◽  
Discrete Curves ◽  
Threshold Setting

Reliable feature extraction from 3D point cloud data is an important problem in many application domains, such as reverse engineering, object recognition, industrial inspection, and autonomous navigation. In this paper, a novel method is proposed for extracting the geometric features from 3D point cloud data based on discrete curves. We extract the discrete curves from 3D point cloud data and research the behaviors of chord lengths, angle variations, and principal curvatures at the geometric features in the discrete curves. Then, the corresponding similarity indicators are defined. Based on the similarity indicators, the geometric features can be extracted from the discrete curves, which are also the geometric features of 3D point cloud data. The threshold values of the similarity indicators are taken from[0,1], which characterize the relative relationship and make the threshold setting easier and more reasonable. The experimental results demonstrate that the proposed method is efficient and reliable.

scholarly journals CONTEXTUAL CLASSIFICATION OF POINT CLOUD DATA BY EXPLOITING INDIVIDUAL 3D NEIGBOURHOODS

2015 ◽  
Vol II-3/W4 ◽  
pp. 271-278 ◽  
Author(s):  
M. Weinmann ◽  
A. Schmidt ◽  
C. Mallet ◽  
S. Hinz ◽  
F. Rottensteiner ◽  
...  
Keyword(s):  
Feature Extraction ◽  
Point Cloud ◽  
Contextual Information ◽  
Point Clouds ◽  
Optimal Size ◽  
Point Cloud Data ◽  
Cloud Data ◽  
Semantic Class ◽  
3D Point Clouds

The fully automated analysis of 3D point clouds is of great importance in photogrammetry, remote sensing and computer vision. For reliably extracting objects such as buildings, road inventory or vegetation, many approaches rely on the results of a point cloud classification, where each 3D point is assigned a respective semantic class label. Such an assignment, in turn, typically involves statistical methods for feature extraction and machine learning. Whereas the different components in the processing workflow have extensively, but separately been investigated in recent years, the respective connection by sharing the results of crucial tasks across all components has not yet been addressed. This connection not only encapsulates the interrelated issues of neighborhood selection and feature extraction, but also the issue of how to involve spatial context in the classification step. In this paper, we present a novel and generic approach for 3D scene analysis which relies on (<i>i</i>) individually optimized 3D neighborhoods for (<i>ii</i>) the extraction of distinctive geometric features and (<i>iii</i>) the contextual classification of point cloud data. For a labeled benchmark dataset, we demonstrate the beneficial impact of involving contextual information in the classification process and that using individual 3D neighborhoods of optimal size significantly increases the quality of the results for both pointwise and contextual classification.

scholarly journals BRUTE FORCE MATCHING BETWEEN CAMERA SHOTS AND SYNTHETIC IMAGES FROM POINT CLOUDS

2016 ◽  
Vol XLI-B5 ◽  
pp. 771-777 ◽  
Author(s):  
R. Boerner ◽  
M. Kröhnert
Keyword(s):  
Point Cloud ◽  
Laser Scanning ◽  
Spatial Information ◽  
Point Clouds ◽  
Synthetic Image ◽  
3D Point Cloud ◽  
Point Cloud Data ◽  
Cloud Data ◽  
Force Matching ◽  
3D Point Clouds

3D point clouds, acquired by state-of-the-art terrestrial laser scanning techniques (TLS), provide spatial information about accuracies up to several millimetres. Unfortunately, common TLS data has no spectral information about the covered scene. However, the matching of TLS data with images is important for monoplotting purposes and point cloud colouration. Well-established methods solve this issue by matching of close range images and point cloud data by fitting optical camera systems on top of laser scanners or rather using ground control points. &lt;br&gt;&lt;br&gt; The approach addressed in this paper aims for the matching of 2D image and 3D point cloud data from a freely moving camera within an environment covered by a large 3D point cloud, e.g. a 3D city model. The key advantage of the free movement affects augmented reality applications or real time measurements. Therefore, a so-called real image, captured by a smartphone camera, has to be matched with a so-called synthetic image which consists of reverse projected 3D point cloud data to a synthetic projection centre whose exterior orientation parameters match the parameters of the image, assuming an ideal distortion free camera.

scholarly journals INTEGRATION OF 3D POINT CLOUDS WITH SEMANTIC 3D CITY MODELS – PROVIDING SEMANTIC INFORMATION BEYOND CLASSIFICATION

2021 ◽  
Vol VIII-4/W2-2021 ◽  
pp. 105-112
Author(s):  
C. Beil ◽  
T. Kutzner ◽  
B. Schwab ◽  
B. Willenborg ◽  
A. Gawronski ◽  
...  
Keyword(s):  
Point Cloud ◽  
Semantic Information ◽  
Spatial Information ◽  
Point Clouds ◽  
Semantic Knowledge ◽  
Point Cloud Data ◽  
Cloud Data ◽  
3D City Models ◽  
3D Point Clouds ◽  
City Models

Abstract. A range of different and increasingly accessible acquisition methods, the possibility for frequent data updates of large areas, and a simple data structure are some of the reasons for the popularity of three-dimensional (3D) point cloud data. While there are multiple techniques for segmenting and classifying point clouds, capabilities of common data formats such as LAS for providing semantic information are mostly limited to assigning points to a certain category (classification). However, several fields of application, such as digital urban twins used for simulations and analyses, require more detailed semantic knowledge. This can be provided by semantic 3D city models containing hierarchically structured semantic and spatial information. Although semantic models are often reconstructed from point clouds, they are usually geometrically less accurate due to generalization processes. First, point cloud data structures / formats are discussed with respect to their semantic capabilities. Then, a new approach for integrating point clouds with semantic 3D city models is presented, consequently combining respective advantages of both data types. In addition to elaborate (and established) semantic concepts for several thematic areas, the new version 3.0 of the international Open Geospatial Consortium (OGC) standard CityGML also provides a PointCloud module. In this paper a scheme is shown, how CityGML 3.0 can be used to provide semantic structures for point clouds (directly or stored in a separate LAS file). Methods and metrics to automatically assign points to corresponding Level of Detail (LoD)2 or LoD3 models are presented. Subsequently, dataset examples implementing these concepts are provided for download.

scholarly journals BRUTE FORCE MATCHING BETWEEN CAMERA SHOTS AND SYNTHETIC IMAGES FROM POINT CLOUDS

2016 ◽  
Vol XLI-B5 ◽  
pp. 771-777
Author(s):  
R. Boerner ◽  
M. Kröhnert
Keyword(s):  
Point Cloud ◽  
Laser Scanning ◽  
Spatial Information ◽  
Point Clouds ◽  
Synthetic Image ◽  
3D Point Cloud ◽  
Point Cloud Data ◽  
Cloud Data ◽  
Force Matching ◽  
3D Point Clouds

3D point clouds, acquired by state-of-the-art terrestrial laser scanning techniques (TLS), provide spatial information about accuracies up to several millimetres. Unfortunately, common TLS data has no spectral information about the covered scene. However, the matching of TLS data with images is important for monoplotting purposes and point cloud colouration. Well-established methods solve this issue by matching of close range images and point cloud data by fitting optical camera systems on top of laser scanners or rather using ground control points. <br><br> The approach addressed in this paper aims for the matching of 2D image and 3D point cloud data from a freely moving camera within an environment covered by a large 3D point cloud, e.g. a 3D city model. The key advantage of the free movement affects augmented reality applications or real time measurements. Therefore, a so-called real image, captured by a smartphone camera, has to be matched with a so-called synthetic image which consists of reverse projected 3D point cloud data to a synthetic projection centre whose exterior orientation parameters match the parameters of the image, assuming an ideal distortion free camera.

Registration and Fusion of UAV LiDAR System Sequence Images and Laser Point Clouds

2020 ◽  
Author(s):  
Jiayong Yu ◽  
Longchen Ma ◽  
Maoyi Tian, ◽  
Xiushan Lu
Keyword(s):  
Point Cloud ◽  
Image Data ◽  
Point Clouds ◽  
Optical Image ◽  
Point Cloud Data ◽  
Feature Points ◽  
Lidar System ◽  
Registration Accuracy ◽  
Cloud Data ◽  
Intensity Image

The unmanned aerial vehicle (UAV)-mounted mobile LiDAR system (ULS) is widely used for geomatics owing to its efficient data acquisition and convenient operation. However, due to limited carrying capacity of a UAV, sensors integrated in the ULS should be small and lightweight, which results in decrease in the density of the collected scanning points. This affects registration between image data and point cloud data. To address this issue, the authors propose a method for registering and fusing ULS sequence images and laser point clouds, wherein they convert the problem of registering point cloud data and image data into a problem of matching feature points between the two images. First, a point cloud is selected to produce an intensity image. Subsequently, the corresponding feature points of the intensity image and the optical image are matched, and exterior orientation parameters are solved using a collinear equation based on image position and orientation. Finally, the sequence images are fused with the laser point cloud, based on the Global Navigation Satellite System (GNSS) time index of the optical image, to generate a true color point cloud. The experimental results show the higher registration accuracy and fusion speed of the proposed method, thereby demonstrating its accuracy and effectiveness.

scholarly journals Multi-Dimensional Underwater Point Cloud Detection Based on Deep Learning

Sensors ◽  
2021 ◽  
Vol 21 (3) ◽  
pp. 884
Author(s):  
Chia-Ming Tsai ◽  
Yi-Horng Lai ◽  
Yung-Da Sun ◽  
Yu-Jen Chung ◽  
Jau-Woei Perng
Keyword(s):  
Deep Learning ◽  
Point Cloud ◽  
Three Dimensional ◽  
Point Clouds ◽  
Training Data ◽  
Network Architectures ◽  
Point Cloud Data ◽  
Data Types ◽  
Raw Data ◽  
Cloud Data

Numerous sensors can obtain images or point cloud data on land, however, the rapid attenuation of electromagnetic signals and the lack of light in water have been observed to restrict sensing functions. This study expands the utilization of two- and three-dimensional detection technologies in underwater applications to detect abandoned tires. A three-dimensional acoustic sensor, the BV5000, is used in this study to collect underwater point cloud data. Some pre-processing steps are proposed to remove noise and the seabed from raw data. Point clouds are then processed to obtain two data types: a 2D image and a 3D point cloud. Deep learning methods with different dimensions are used to train the models. In the two-dimensional method, the point cloud is transferred into a bird’s eye view image. The Faster R-CNN and YOLOv3 network architectures are used to detect tires. Meanwhile, in the three-dimensional method, the point cloud associated with a tire is cut out from the raw data and is used as training data. The PointNet and PointConv network architectures are then used for tire classification. The results show that both approaches provide good accuracy.

3D Model Registration Based on Feature Extraction

2011 ◽  
Vol 299-300 ◽  
pp. 1091-1094 ◽  
Author(s):  
Jiang Zhu ◽  
Yuichi Takekuma ◽  
Tomohisa Tanaka ◽  
Yoshio Saito
Keyword(s):  
Feature Extraction ◽  
Point Cloud ◽  
3D Model ◽  
Point Cloud Data ◽  
Coordinate Systems ◽  
High Precision Measurement ◽  
Registration Method ◽  
Cloud Data ◽  
Cad System ◽  
Complicated Model

Currently, design and processing of complicated model are enabled by the progress of the CAD/CAM system. In shape measurement, high precision measurement is performed using CMM. In order to evaluate the machined part, the designed model made by CAD system the point cloud data provided by the measurement system are analyzed and compared. Usually, the designed CAD model and measured point cloud data are made in the different coordinate systems, it is necessary to register those models in the same coordinate system for evaluation. In this research, a 3D model registration method based on feature extraction and iterative closest point (ICP) algorithm is proposed. It could efficiently and accurately register two models in different coordinate systems, and effectively avoid the problem of localized solution.

scholarly journals VISUALIZATION OF THE CONSTRUCTION OF ANCIENT ROMAN BUILDINGS IN OSTIA USING POINT CLOUD DATA

2017 ◽  
Vol XLII-2/W3 ◽  
pp. 345-352
Author(s):  
Y. Hori ◽  
T. Ogawa
Keyword(s):  
Point Cloud ◽  
Laser Scanning ◽  
Feature Matching ◽  
Three Dimensional ◽  
Point Clouds ◽  
Final Report ◽  
Point Cloud Data ◽  
Cloud Data ◽  
Coverage Accuracy ◽  
New Research

The implementation of laser scanning in the field of archaeology provides us with an entirely new dimension in research and surveying. It allows us to digitally recreate individual objects, or entire cities, using millions of three-dimensional points grouped together in what is referred to as "point clouds". In addition, the visualization of the point cloud data, which can be used in the final report by archaeologists and architects, should usually be produced as a JPG or TIFF file. Not only the visualization of point cloud data, but also re-examination of older data and new survey of the construction of Roman building applying remote-sensing technology for precise and detailed measurements afford new information that may lead to revising drawings of ancient buildings which had been adduced as evidence without any consideration of a degree of accuracy, and finally can provide new research of ancient buildings. We used laser scanners at fields because of its speed, comprehensive coverage, accuracy and flexibility of data manipulation. Therefore, we “skipped” many of post-processing and focused on the images created from the meta-data simply aligned using a tool which extended automatic feature-matching algorithm and a popular renderer that can provide graphic results.

scholarly journals Modeling and Processing of Smart Point Clouds of Cultural Relics with Complex Geometries

2021 ◽  
Vol 10 (9) ◽  
pp. 617
Author(s):  
Su Yang ◽  
Miaole Hou ◽  
Ahmed Shaker ◽  
Songnian Li
Keyword(s):  
Point Cloud ◽  
Semantic Information ◽  
Point Clouds ◽  
Information Modeling ◽  
Complex Geometries ◽  
3D Point Cloud ◽  
Point Cloud Data ◽  
Modeling Framework ◽  
Cloud Data ◽  
Cultural Relics

The digital documentation of cultural relics plays an important role in archiving, protection, and management. In the field of cultural heritage, three-dimensional (3D) point cloud data is effective at expressing complex geometric structures and geometric details on the surface of cultural relics, but lacks semantic information. To elaborate the geometric information of cultural relics and add meaningful semantic information, we propose a modeling and processing method of smart point clouds of cultural relics with complex geometries. An information modeling framework for complex geometric cultural relics was designed based on the concept of smart point clouds, in which 3D point cloud data are organized through the time dimension and different spatial scales indicating different geometric details. The proposed model allows smart point clouds or a subset to be linked with semantic information or related documents. As such, this novel information modeling framework can be used to describe rich semantic information and high-level details of geometry. The proposed information model not only expresses the complex geometric structure of the cultural relics and the geometric details on the surface, but also has rich semantic information, and can even be associated with documents. A case study of the Dazu Thousand-Hand Bodhisattva Statue, which is characterized by a variety of complex geometries, reveals that our proposed framework is capable of modeling and processing the statue with excellent applicability and expansibility. This work provides insights into the sustainable development of cultural heritage protection globally.

Sign in / Sign up

Export Citation Format

Share Document