scholarly journals Botanically Templated Monolithic Macrostructured Zinc Oxide Materials for Photocatalysis

Inorganics ◽  
2018 ◽  
Vol 6 (4) ◽  
pp. 103
Author(s):  
Nathan Black ◽  
David Ciota ◽  
Edward Gillan

With an increased focus on light energy to facilitate catalytic processes, photocatalysts have been intensively studied for a wide range of energy and environmental applications. In this report, we describe the use of chemically dehydrated leaves as sacrificial foam-like templates for the growth of monolithic macrostructured semiconducting zinc oxide and nickel or cobalt doped zinc oxide materials. The composition and structure of these templated zinc oxides were characterized using X-ray powder diffraction, scanning electron microscopy, energy dispersive spectroscopy, and X-ray photoelectron spectroscopy. Optical properties were examined using solid-state UV–vis diffuse reflectance spectroscopy. The metal-doped ZnO materials have enhanced visible absorption and lower band gaps as compared to ZnO. The botanically templated ZnO materials retain the macroscopic cellular form of the leaf template with fused nanoparticle walls. Their UV photocatalytic oxidative abilities were investigated using methylene blue dye degradation in air. The leaf templated zinc oxides degrade ~85% of methylene blue dye with 30 min of UV illumination. Nickel and cobalt doped zinc oxides showed varying degrees of decreased UV and visible light photocatalytic activity, possibly due to metal-mediated charge recombination. The mild chemical dehydration process here allows complex soft botanical structures to be easily utilized for templating materials.

2021 ◽  
pp. 149830
Author(s):  
Fabiola Pantò ◽  
Zainab Dahrouch ◽  
Abhirup Saha ◽  
Salvatore Patanè ◽  
Saveria Santangelo ◽  
...  

2011 ◽  
Vol 335-336 ◽  
pp. 1385-1390 ◽  
Author(s):  
Shuo Wiei Zhao ◽  
Hui Xu ◽  
Hua Ming Li ◽  
Yuan Guo Xu

In order to improve the photocatalytic activity, Co was successfully loaded into Ag3VO4 by using impregnation process. The samples were characterized by X-ray diffraction (XRD), scanning electron microscope (SEM), energy-dispersive X-ray spectroscopy (EDS) and diffuse reflectance spectroscopy (DRS). The XRD and SEM–EDS analyses revealed that Co ion was dispersed on Ag3VO4. The DRS results indicated that the absorption edge of the Co–Ag3VO4 catalyst shifted to longer wavelength. The enhanced photocatalytic activity of Co–Ag3VO4 for Methylene Blue(MB) dye degradation under visible light irradiation was due to its wider absorption edge and higher separation rate of photo-generated electron and holes. In the experimental conditions, it is demonstrated that the MB was effectively degraded by more than 95% within 40 min when the Co–Ag3VO4 catalyst was calcined at 300°C with 1 wt.% Co content.


2019 ◽  
Vol 487 ◽  
pp. 539-549 ◽  
Author(s):  
Mohamed Mokhtar Mohamed ◽  
Mohamed A. Ghanem ◽  
Mohamed Khairy ◽  
Eman Naguib ◽  
Nouf H. Alotaibi

2012 ◽  
Vol 584 ◽  
pp. 396-400 ◽  
Author(s):  
Aravind Naga Revuru ◽  
Nagarajan Padmavathy ◽  
Angappan Sheela ◽  
Swamiappan Sasikumar

The major cause of surface and ground water contamination is due to effluent from dyeing industries. The discharged effluent chemicals inhibit light penetration into water bodies and some are considered to be carcinogenic. In this study, the photocatalytic decomposition of the synthetic dye, methylene blue was investigated in the presence of activated TiO2. The TiO2 sample was characterized by using XRD to analyze the presence of anatase and rutile phases. The dye degradation was monitored as a change in absorbance by UV-Visible spectrophotometer. The contributing factors towards dye degradation include both the dye concentration as well as the quantity of TiO2 used. Different quantities of TiO2 in anatase phase was taken and activated under UV radiation for 15 min. and subsequently coated on to TLC plates using 5% polyvinyl alcohol as a binding agent. This photocatalytic plate was kept in the methylene blue dye solution and exposed to sunlight. The results shows that 57% of the 30ppm methylene blue dye gets degraded within 75min., when exposed to UV activated TiO2 in presence of natural sunlight.


2018 ◽  
Vol 47 (12) ◽  
pp. 4251-4258 ◽  
Author(s):  
Ming Zhang ◽  
Liwen Wang ◽  
Tianyu Zeng ◽  
Qigao Shang ◽  
Hong Zhou ◽  
...  

Two 3D coordination polymers, bridged by 4,4′-bipyridine, were readily synthesized and fully characterized. As efficient photocatalysts in dye degradation under visible light, the mechanism and stability were studied.


2020 ◽  
Vol 845 ◽  
pp. 156333 ◽  
Author(s):  
Ahad Mohammadzadeh ◽  
Mohammad Khoshghadam-Pireyousefan ◽  
Bahram Shokrianfard-Ravasjan ◽  
Maziyar Azadbeh ◽  
Hadi Rashedi ◽  
...  

Sign in / Sign up

Export Citation Format

Share Document