scholarly journals Insights into the Processing of Recycled Carbon Fibers via Injection Molding Compounding

2020 ◽  
Vol 4 (4) ◽  
pp. 161
Author(s):  
Jochen Wellekötter ◽  
Julia Resch ◽  
Stephan Baz ◽  
Götz Theo Gresser ◽  
Christian Bonten
Keyword(s):  
Injection Molding ◽  
Matrix Material ◽  
High Strength ◽  
High Volume ◽  
Injection Molding Process ◽  
Fiber Reinforced ◽  
Feed System ◽  
Molding Process ◽  
Reinforced Plastics ◽  
Recycled Fibers

Although fiber-reinforced plastics combine high strength and stiffness with being lightweight, major difficulties arise with high volume production and the return of manufactured parts back into the cycle of materials at the end of their lifecycles. In a novel approach, structural parts were produced from recycled material while utilizing the so-called injection molding compounding process. Recycled fibers and recycled polyamide matrix material were used by blending carbon and matrix fibers into a sliver before processing. Injection molding was then used to produce long fiber-reinforced parts through a direct fiber feed system. Recycled matrix granules were incorporated into the injection molding process by means of an injection molding compounder to investigate their influences on the mechanical properties of the parts. The findings show that the recycled fibers and matrix perform well in standardized tests, although fiber length and fiber content vary significantly and remain below expectations.

scholarly journals Process influences and correction possibilities for high precision injection molded freeform optics

2016 ◽  
Vol 5 (4) ◽  
Author(s):  
Lars Dick ◽  
Stefan Risse ◽  
Andreas Tünnermann
Keyword(s):  
Injection Molding ◽  
High Precision ◽  
Influencing Factor ◽  
High Volume ◽  
Injection Molding Process ◽  
Molding Process ◽  
Shape Accuracy ◽  
Polymer Optics ◽  
Freeform Optics ◽  
Form Deviation

AbstractModern injection molding processes offer a cost-efficient method for manufacturing high precision plastic optics for high volume applications. Besides form deviation of molded freeform optics, internal material stress is a relevant influencing factor for the functionality of a freeform optics in an optical system. This paper illustrates dominant influence parameters of an injection molding process relating to form deviation and internal material stress based on a freeform demonstrator geometry. Furthermore, a deterministic and efficient way for 3D mold correcting of systematic, asymmetrical shrinkage errors is shown to reach micrometer range shape accuracy at diameters up to 40 mm. In a second case, a stress-optimized parameter combination using unusual molding conditions was 3D corrected to reach high precision and low stress freeform polymer optics.

Process comparison on the microstructure and mechanical properties of fiber-reinforced polyphenylene sulfide using MuCell technology

2018 ◽  
Vol 37 (15) ◽  
pp. 1020-1034 ◽  
Author(s):  
Christoph Lohr ◽  
Björn Beck ◽  
Frank Henning ◽  
Kay André Weidenmann ◽  
Peter Elsner
Keyword(s):  
Mechanical Properties ◽  
High Pressure ◽  
Injection Molding ◽  
Fiber Orientation ◽  
Polyphenylene Sulfide ◽  
Injection Molding Process ◽  
Fiber Reinforced ◽  
Molding Process ◽  
Glass Fiber Reinforced ◽  
Foam Injection Molding

The MuCell process is a special injection molding process which utilizes supercritical gas (nitrogen) to create integral foam sandwiches. The advantages are lower weight, higher specific properties and shorter cycle times. In this study, a series of glass fiber-reinforced polyphenylene sulfide foam blanks are manufactured using the MuCell injection molding process. The different variations of the process (low-pressure also known as structural foam injection molding) and high-pressure foam injection molding (also known as “core back expansion,” “breathing mold,” “precision opening,” decompression molding) are used. The sandwich structure and mechanical properties (tensile strength, bending strength, and impact behavior) of the microcellular and glass fiber-reinforced polyphenylene sulfide foams are systematically investigated and compared to compact material. The results showed that the injection parameters (injection speed, foaming mechanism) played an important role in the relative density of microcellular polyphenylene sulfide foams and the mechanical properties. It could be shown that the specific tensile strength decreased while increasing the degree of foaming which can be explained by the increased number of cells and the resulting cell size. This leads to stress peaks which lower the mechanical properties. The Charpy impact strength shows a significant dependence on the fiber orientation. The specific bending modulus of the high-pressure foaming process, however, surpasses the values of the other two processes showing the potential of this manufacturing variation especially with regard to bending loads. Furthermore, a high dependence of the mechanical properties on the fiber orientation of the tested specimens can be found.

Sign in / Sign up

Export Citation Format

Share Document