scholarly journals Research and Engineering Application of Salt Erosion Resistance of Magnesium Oxychloride Cement Concrete

Materials ◽  
2021 ◽  
Vol 14 (24) ◽  
pp. 7880
Author(s):  
Chenggong Chang ◽  
Lingyun An ◽  
Weixin Zheng ◽  
Jing Wen ◽  
Jinmei Dong ◽  
...  

Aiming at the problem that ordinary cement concrete is subjected to damage in heavy saline soil areas in China, a new type of magnesium oxychloride cement concrete is prepared by using the gelling properties of magnesium oxychloride cement in this study, and the erosion resistance of the synthesized magnesium oxychloride cement concrete in concentrated brine of salt lakes is studied through the full immersion test. The effects of concentrated brine of salt lakes on the macroscopic, microscopic morphology, phase composition and mechanical properties of magnesium oxychloride cement concrete are investigated by means of macro-morphology, erosion depth, SEM, XRD and strength changes. The salt erosion resistance mechanism of magnesium oxychloride cement concrete is revealed. The results demonstrate that under the environment of full immersion in concentrated brine of salt lakes, there is no macroscopic phenomenon of concrete damage due to salt crystallization, and the main phase composition is basically unchanged. The microscopic morphology mostly changes from needle-rod-like to gel-like. Due to the formation of a new 5·1·8 phase on the surface layer and the increase in compactness, its compressive strength has a gradual increase trend. Based on the engineering application of magnesium oxychloride cement concrete, it is further confirmed that magnesium oxychloride cement concrete has excellent salt erosion resistance and good weather resistance, which provides theoretical support for future popularization and application.

2019 ◽  
Vol 8 (1) ◽  
pp. 94-104 ◽  
Author(s):  
Wei Gong ◽  
Hongfa Yu ◽  
Haiyan Ma ◽  
Hongxia Qiao ◽  
Guangfeng Chen

Author(s):  
Timothy D. Biel ◽  
Hosin Lee

Either portland cement or magnesium oxychloride cement was used as binders for concretes that incorporated fine rubber aggregate, ranging from 0 to 25 percent by volume. The concretes were tested for their compressive and split tensile strengths to determine whether the use of a magnesium oxychloride cement along with recycled tire rubbers would improve concrete properties. Failure of the concrete around the rubber particles was attributed to tension failure, leading to weak shear failure of the concrete matrix. Both portland and magnesium oxychloride cement concretes lost 90 percent of their compressive strength with 25 percent rubber by volume. The portland cement concrete retained 20 percent of its tensile strength, and the magnesium oxychloride cement concrete retained 35 percent of its tensile strength. Both compressive and tensile strengths of magnesium oxychloride cement rubber concrete were significantly higher than rubberized portland cement rubber concrete.


2019 ◽  
Vol 26 (12) ◽  
pp. 3410-3419
Author(s):  
Wei-xin Zheng ◽  
Xue-ying Xiao ◽  
Cheng-gong Chang ◽  
Jin-mei Dong ◽  
Jing Wen ◽  
...  

Materials ◽  
2021 ◽  
Vol 14 (14) ◽  
pp. 3899
Author(s):  
Pan Liu ◽  
Jinmei Dong ◽  
Chenggong Chang ◽  
Weixin Zheng ◽  
Xiuquan Liu ◽  
...  

Magnesium oxychloride cement (abbreviated as MOC) was prepared using magnesium residue obtained from Li2CO3 extraction from salt lakes as raw material instead of light magnesium oxide. The properties of magnesium residue calcined at different temperatures were researched by XRD, SEM, LSPA, and SNAA. The preparation of MOC specimens with magnesium residue at different calcination temperatures (from 500 °C to 800 °C) and magnesium chloride solutions with different Baume degrees (24 Baume and 28 Baume) were studied. Compression strength tests were conducted at different curing ages from 3 d to 28 d. The hydration products, microstructure, and porosity of the specimens were analyzed by XRD, SEM, and MIP, respectively. The experimental results showed that magnesium residue’s properties, the BET surface gradually decreased and the crystal size increased with increasing calcination temperature, resulting in a longer setting time of MOC cement. Additionally, the experiment also indicated that magnesium chloride solution with a high Baume makes the MOC cement have higher strength. The MOC specimens prepared by magnesium residue at 800 °C and magnesium chloride solution Baume 28 exhibited a compressive of 123.3 MPa at 28 d, which met the mechanical property requirement of MOC materials. At the same time, magnesium oxychloride cement can be an effective alternative to Portland cement-based materials. In addition, it can reduce environmental pollution and improve the environmental impact of the construction industry, which is of great significance for sustainable development.


2020 ◽  
Author(s):  
Penghui Wang ◽  
Hongxia Qiao ◽  
Yuanke Li ◽  
Kefan Chen ◽  
Qiong Feng ◽  
...  

Sign in / Sign up

Export Citation Format

Share Document