scholarly journals Study on MnS Inclusion Aggregation along Continuous Casting Slab Thickness of Medium Carbon Structural Steel

Metals ◽  
2021 ◽  
Vol 12 (1) ◽  
pp. 56
Author(s):  
Qiuyang Yu ◽  
Xiaogang Yang ◽  
Chaobin Lai ◽  
Zhifang Tong

Precipitation of MnS inclusions in steel affects the mechanical properties of the material significantly. The evolution of MnS inclusions along the continuous casting slab thickness and its influencing factors has not been clearly established and comprehensively studied. In this paper, solidification macrostructure, sulfur segregation and MnS inclusions in the continuous casting slab of medium carbon structural steel 45# were studied by various methods, including the metallographic observations, elemental analysis, scanning electron microscope (SEM) with Energy Dispersive Spectrometer (EDS) observation, automatic particle analysis, and thermodynamic calculations. The 2D/3D morphologies of MnS inclusions suggest that the sulfides turn from globular to rodlike, and further to dendritic shape along the slab thickness progressively. Furthermore, it was found that MnS inclusions are remarkably aggregated in the columnar crystals and the equiaxed crystals mixed zone, where the sulfides have the largest average diameter of 6.35 μm and the second maximum area fraction of 0.025% along the slab thickness. In order to reveal the mechanism of this phenomenon, the precipitation temperature of MnS inclusion in the 45# steel was clarified by thermodynamic calculation and experimental observation, and the quantitative relationships among the distribution of sulfur content, secondary dendrite arm spacing (SDAS), and precipitation area fraction of MnS inclusions were discussed. Moreover, the inclusion size was numerically predicted to compare with the measured value. The results indicate that the large SDAS, high sulfur content and low cooling rate accounting for the large-size aggregated MnS inclusions in the mixed zone. Unfortunately, the dendritic MnS inclusions, even if the average diameter exceeds 52 μm, can act as the nucleation sites for ferrites, and the distribution of the sulfides promotes uneven microstructure in the steel.

2005 ◽  
Vol 297-300 ◽  
pp. 2201-2206
Author(s):  
Jun Youn Lee ◽  
Soon Bok Lee ◽  
Jae Kyung Yi

Until now, surface defects of continuous casting slab have been removed by the enforced surface scarfing to produce high quality steel materials. An evaluation technique for surface and internal defects of slab is required to enhance the production of medium carbon steels and acquire defect-map. Accordingly as a preliminary step, longitudinal wave testing and Rayleigh wave testing were carried out on slab specimens of medium carbon steel to get basic transmission characteristics of ultrasonic waves. This research provides as basic data for on-line defect estimation using a laser ultrasonic or EMAT in non-contact ultrasonic detecting techniques in future.


2015 ◽  
Vol 30 (1) ◽  
pp. 60-64
Author(s):  
V.I. Lukin ◽  
V.G. Kovalchuk ◽  
N.G. Pokrovskaya ◽  
E.V. Golev ◽  
O.A. Bannykh ◽  
...  

2020 ◽  
Vol 18 (4) ◽  
pp. 643-648
Author(s):  
Asset Rakishev ◽  
Almat Sagitov ◽  
Bakytzhan Donenbaev ◽  
Karibek Sherov ◽  
Sayagul Tussupova ◽  
...  

The authors developed the design of a special multi-blade rotary-friction tool. The multi-blade rotary-friction tool is equipped with two cupped cutters - heating and cutting. The heating cupped cutter is made of medium-carbon structural steel of any brand, and the cutting cupped cutter is made of steel R6M5. The final formation of the treated surface and its quality is provided by the cutting cupped cutter. This article presents the results of the calculation of the strength of the cutting cupped cutter multi-blade rotary friction tool.As a result, the following were established: when processing steels 30HGSA cutting force components reach the maximum value than when processing materials 40HN2MA, St.45, and St.3c (calm); strength and rigidity of the cutting cupped cutter is sufficient for processing optimal cutting conditions: nsp = 1000 rpm; S = 0.42 mm/rot; t = 1.0 mm.


1992 ◽  
Vol 34 (8) ◽  
pp. 500-504 ◽  
Author(s):  
A. P. Gulyaev ◽  
V. N. Zikeev ◽  
Yu. V. Kornyushchenkova ◽  
S. V. Zemskii

Sign in / Sign up

Export Citation Format

Share Document