scholarly journals Performance Analysis of Surface Reconstruction Algorithms in Vertical Scanning Interferometry Based on Coherence Envelope Detection

Micromachines ◽  
2021 ◽  
Vol 12 (2) ◽  
pp. 164
Author(s):  
Dongxu Wu ◽  
Fusheng Liang ◽  
Chengwei Kang ◽  
Fengzhou Fang
Keyword(s):  
Surface Reconstruction ◽  
Measurement Accuracy ◽  
Experimental Studies ◽  
Reconstruction Algorithm ◽  
Low Noise ◽  
Surface Measurement ◽  
Reconstruction Algorithms ◽  
Centroid Method ◽  
Envelope Detection ◽  
Vertical Scanning Interferometry

Optical interferometry plays an important role in the topographical surface measurement and characterization in precision/ultra-precision manufacturing. An appropriate surface reconstruction algorithm is essential in obtaining accurate topography information from the digitized interferograms. However, the performance of a surface reconstruction algorithm in interferometric measurements is influenced by environmental disturbances and system noise. This paper presents a comparative analysis of three algorithms commonly used for coherence envelope detection in vertical scanning interferometry, including the centroid method, fast Fourier transform (FFT), and Hilbert transform (HT). Numerical analysis and experimental studies were carried out to evaluate the performance of different envelope detection algorithms in terms of measurement accuracy, speed, and noise resistance. Step height standards were measured using a developed interferometer and the step profiles were reconstructed by different algorithms. The results show that the centroid method has a higher measurement speed than the FFT and HT methods, but it can only provide acceptable measurement accuracy at a low noise level. The FFT and HT methods outperform the centroid method in terms of noise immunity and measurement accuracy. Even if the FFT and HT methods provide similar measurement accuracy, the HT method has a superior measurement speed compared to the FFT method.

A Confocal Surface Measurement System Having Improved Measurement Accuracy for Rough Surfaces and Measurement Speed

2003 ◽  
Vol 15 (3) ◽  
pp. 331-340 ◽  
Author(s):  
Mitsuhiro Ishihara ◽  
Keyword(s):  
Measurement System ◽  
Measurement Accuracy ◽  
Rough Surfaces ◽  
Reconstruction Algorithm ◽  
Surface Measurement ◽  
Object Surface ◽  
Beam Spot ◽  
Improve Accuracy ◽  
Improved Accuracy ◽  
Surface Measurement System

We discuss a confocal surface measurement system having improved accuracy for rough surfaces and speed. To enhance speed, we propose (1) a novel nonscanning confocal microscope, (2) a fast object surface reconstruction algorithm, and (3) an optical focused plane shift mechanism. The system we developed operates at speeds exceeding a million points per second. To improve accuracy for rough surfaces, we propose optical smoothing using confocal beam spot microscanning. Results of experiments confirmed that the system measures rough surfaces nearly as accurately as smooth surfaces.

scholarly journals Comparison between silicon photomultiplier-based and conventional PET/CT in patients with suspected lung cancer—a pilot study

2019 ◽  
Vol 9 (1) ◽  
Author(s):  
Johan Economou Lundeberg ◽  
Jenny Oddstig ◽  
Ulrika Bitzén ◽  
Elin Trägårdh
Keyword(s):  
Lung Cancer ◽  
Expectation Maximization ◽  
Image Interpretation ◽  
Imaging Study ◽  
Reconstruction Algorithm ◽  
Tnm Staging ◽  
Reconstruction Algorithms ◽  
Silicon Photomultiplier ◽  
Standardized Uptake Values ◽  
Pet Ct

Abstract Background Lung cancer is one of the most common cancers in the world. Early detection and correct staging are fundamental for treatment and prognosis. Positron emission tomography with computed tomography (PET/CT) is recommended clinically. Silicon (Si) photomultiplier (PM)-based PET technology and new reconstruction algorithms are hoped to increase the detection of small lesions and enable earlier detection of pathologies including metastatic spread. The aim of this study was to compare the diagnostic performance of a SiPM-based PET/CT (including a new block-sequential regularization expectation maximization (BSREM) reconstruction algorithm) with a conventional PM-based PET/CT including a conventional ordered subset expectation maximization (OSEM) reconstruction algorithm. The focus was patients admitted for 18F-fluorodeoxyglucose (FDG) PET/CT for initial diagnosis and staging of suspected lung cancer. Patients were scanned on both a SiPM-based PET/CT (Discovery MI; GE Healthcare, Milwaukee, MI, USA) and a PM-based PET/CT (Discovery 690; GE Healthcare, Milwaukee, MI, USA). Standardized uptake values (SUV) and image interpretation were compared between the two systems. Image interpretations were further compared with histopathology when available. Results Seventeen patients referred for suspected lung cancer were included in our single injection, dual imaging study. No statically significant differences in SUVmax of suspected malignant primary tumours were found between the two PET/CT systems. SUVmax in suspected malignant intrathoracic lymph nodes was 10% higher on the SiPM-based system (p = 0.026). Good consistency (14/17 cases) between the PET/CT systems were found when comparing simplified TNM staging. The available histology results did not find any obvious differences between the systems. Conclusion In a clinical setting, the new SiPM-based PET/CT system with a new BSREM reconstruction algorithm provided a higher SUVmax for suspected lymph node metastases compared to the PM-based system. However, no improvement in lung cancer detection was seen.

scholarly journals Optical Inspection Systems for Axisymmetric Parts with Spatial 2D Resolution

Symmetry ◽  
2021 ◽  
Vol 13 (7) ◽  
pp. 1218
Author(s):  
Aleksandr Kulchitskiy
Keyword(s):  
Control System ◽  
Optical System ◽  
Measurement Accuracy ◽  
Experimental Studies ◽  
Digital Camera ◽  
Digital Cameras ◽  
Bodies Of Revolution ◽  
Optical Inspection ◽  
Inspection Systems ◽  
Projection Error

The article proposes a solution to the problem of increasing the accuracy of determining the main shaping dimensions of axisymmetric parts through a control system that implements the optical method of spatial resolution. The influence of the projection error of a passive optical system for controlling the geometric parameters of bodies of revolution from the image of its sections, obtained by a digital camera with non-telecentric optics, on the measurement accuracy is shown. Analytical dependencies are derived that describe the features of the transmission of measuring information of a system with non-telecentric optics in order to estimate the projection error. On the basis of the obtained dependences, a method for compensating the projection error of the systems for controlling the geometry of the main shaping surfaces of bodies of revolution has been developed, which makes it possible to increase the accuracy of determining dimensions when using digital cameras with a resolution of 5 megapixels or more, equipped with short-focus lenses. The possibility of implementing the proposed technique is confirmed by the results of experimental studies.

scholarly journals Manual kidney stone size measurements in computed tomography are most accurate using multiplanar image reformatations and bone window settings

2021 ◽  
Vol 11 (1) ◽  
Author(s):  
Robert Peter Reimer ◽  
Konstantin Klein ◽  
Miriam Rinneburger ◽  
David Zopfs ◽  
Simon Lennartz ◽  
...  
Keyword(s):  
Computed Tomography ◽  
Treatment Decision ◽  
Reconstruction Algorithm ◽  
Slice Thickness ◽  
Reconstruction Algorithms ◽  
Stone Size ◽  
Bone Window ◽  
3D Printed ◽  
Measurement Strategies ◽  
Digital Caliper

AbstractComputed tomography in suspected urolithiasis provides information about the presence, location and size of stones. Particularly stone size is a key parameter in treatment decision; however, data on impact of reformatation and measurement strategies is sparse. This study aimed to investigate the influence of different image reformatations, slice thicknesses and window settings on stone size measurements. Reference stone sizes of 47 kidney stones representative for clinically encountered compositions were measured manually using a digital caliper (Man-M). Afterwards stones were placed in a 3D-printed, semi-anthropomorphic phantom, and scanned using a low dose protocol (CTDIvol 2 mGy). Images were reconstructed using hybrid-iterative and model-based iterative reconstruction algorithms (HIR, MBIR) with different slice thicknesses. Two independent readers measured largest stone diameter on axial (2 mm and 5 mm) and multiplanar reformatations (based upon 0.67 mm reconstructions) using different window settings (soft-tissue and bone). Statistics were conducted using ANOVA ± correction for multiple comparisons. Overall stone size in CT was underestimated compared to Man-M (8.8 ± 2.9 vs. 7.7 ± 2.7 mm, p < 0.05), yet closely correlated (r = 0.70). Reconstruction algorithm and slice thickness did not significantly impact measurements (p > 0.05), while image reformatations and window settings did (p < 0.05). CT measurements using multiplanar reformatation with a bone window setting showed closest agreement with Man-M (8.7 ± 3.1 vs. 8.8 ± 2.9 mm, p < 0.05, r = 0.83). Manual CT-based stone size measurements are most accurate using multiplanar image reformatation with a bone window setting, while measurements on axial planes with different slice thicknesses underestimate true stone size. Therefore, this procedure is recommended when impacting treatment decision.

scholarly journals Combining Acceleration Techniques for Low-Dose X-Ray Cone Beam Computed Tomography Image Reconstruction

2017 ◽  
Vol 2017 ◽  
pp. 1-10
Author(s):  
Hsuan-Ming Huang ◽  
Ing-Tsung Hsiao
Keyword(s):  
Computed Tomography ◽  
Image Reconstruction ◽  
Low Dose ◽  
Computational Cost ◽  
Reconstruction Algorithm ◽  
Reconstruction Algorithms ◽  
Acceleration Techniques ◽  
Reconstruction Methods ◽  
Speed Up ◽  
Phantom Studies

Background and Objective. Over the past decade, image quality in low-dose computed tomography has been greatly improved by various compressive sensing- (CS-) based reconstruction methods. However, these methods have some disadvantages including high computational cost and slow convergence rate. Many different speed-up techniques for CS-based reconstruction algorithms have been developed. The purpose of this paper is to propose a fast reconstruction framework that combines a CS-based reconstruction algorithm with several speed-up techniques.Methods. First, total difference minimization (TDM) was implemented using the soft-threshold filtering (STF). Second, we combined TDM-STF with the ordered subsets transmission (OSTR) algorithm for accelerating the convergence. To further speed up the convergence of the proposed method, we applied the power factor and the fast iterative shrinkage thresholding algorithm to OSTR and TDM-STF, respectively.Results. Results obtained from simulation and phantom studies showed that many speed-up techniques could be combined to greatly improve the convergence speed of a CS-based reconstruction algorithm. More importantly, the increased computation time (≤10%) was minor as compared to the acceleration provided by the proposed method.Conclusions. In this paper, we have presented a CS-based reconstruction framework that combines several acceleration techniques. Both simulation and phantom studies provide evidence that the proposed method has the potential to satisfy the requirement of fast image reconstruction in practical CT.

Distortion reconstruction in S-ducts from wall static pressure measurements

2018 ◽  
Vol 28 (5) ◽  
pp. 1134-1155 ◽  
Author(s):  
Pierre Grenson ◽  
Eric Garnier
Keyword(s):  
Static Pressure ◽  
Active Flow Control ◽  
Hybrid Approach ◽  
Reconstruction Algorithm ◽  
Stochastic Estimation ◽  
Pressure Measurements ◽  
Reconstruction Algorithms ◽  
Detached Eddy Simulation ◽  
Flow Distortion ◽  
Content Type

Purpose This paper aims to report the attempts for predicting “on-the-fly” flow distortion in the engine entrance plane of a highly curved S-duct from wall static pressure measurements. Such a technology would be indispensable to trigger active flow control devices to mitigate the intense flow separations which occur in specific flight conditions. Design/methodology/approach Evaluation of different reconstruction algorithms is performed on the basis of data extracted from a Zonal Detached Eddy Simulation (ZDES) of a well-documented S-Duct (Garnier et al., AIAA J., 2015). Contrary to RANS methods, such a hybrid approach makes unsteady distortions available, which are necessary information for reconstruction algorithm assessment. Findings The best reconstruction accuracy is obtained with the artificial neural network (ANN) but the improvement compared to the classical linear stochastic estimation (LSE) is minor. The different inlet distortion coefficients are not reconstructed with the same accuracy. KA2 coefficient is finally identified as the more suited for activation of the control device. Originality/value LSE and its second-order variant (quadratic stochastic estimation [QSE]) are applied for reconstructing instantaneous stagnation pressure in the flow field. The potential improvement of an algorithm based on an ANN is also evaluated. The statistical link between the wall sensors and 40-Kulite rake sensors are carefully discussed and the accuracy of the reconstruction of the most used distortion coefficients (DC60, RDI, CDI and KA2) is quantified for each estimation technique.

scholarly journals Source reconstruction for bioluminescence tomography via L1∕2 regularization

2018 ◽  
Vol 11 (02) ◽  
pp. 1750014 ◽  
Author(s):  
Jingjing Yu ◽  
Qiyue Li ◽  
Haiyu Wang
Keyword(s):  
Image Quality ◽  
Matching Pursuit ◽  
Imaging Modality ◽  
Reconstruction Algorithm ◽  
Reconstruction Method ◽  
Reconstruction Algorithms ◽  
Preclinical Research ◽  
Bioluminescence Tomography ◽  
Comparison Results ◽  
Stable Reconstruction

Bioluminescence tomography (BLT) is an important noninvasive optical molecular imaging modality in preclinical research. To improve the image quality, reconstruction algorithms have to deal with the inherent ill-posedness of BLT inverse problem. The sparse characteristic of bioluminescent sources in spatial distribution has been widely explored in BLT and many L1-regularized methods have been investigated due to the sparsity-inducing properties of L1 norm. In this paper, we present a reconstruction method based on L[Formula: see text] regularization to enhance sparsity of BLT solution and solve the nonconvex L[Formula: see text] norm problem by converting it to a series of weighted L1 homotopy minimization problems with iteratively updated weights. To assess the performance of the proposed reconstruction algorithm, simulations on a heterogeneous mouse model are designed to compare it with three representative sparse reconstruction algorithms, including the weighted interior-point, L1 homotopy, and the Stagewise Orthogonal Matching Pursuit algorithm. Simulation results show that the proposed method yield stable reconstruction results under different noise levels. Quantitative comparison results demonstrate that the proposed algorithm outperforms the competitor algorithms in location accuracy, multiple-source resolving and image quality.

Sign in / Sign up

Export Citation Format

Share Document