scholarly journals Laser–Material Interactions of High-Quality Ultrashort Pulsed Vector Vortex Beams

Micromachines ◽  
2021 ◽  
Vol 12 (4) ◽  
pp. 376 ◽  
Author(s):  
Yue Tang ◽  
Walter Perrie ◽  
David Rico Sierra ◽  
Qianliang Li ◽  
Dun Liu ◽  
...  

Diffractive multi-beams based on 1 × 5 and 2 × 2 binary Dammann gratings applied to a spatial light modulator (SLM) combined with a nanostructured S-wave plate have been used to generate uniform multiple cylindrical vector beams with radial and azimuthal polarizations. The vector quality factor (concurrence) of the single vector vortex beam was found to be C = 0.95 ± 0.02, hence showing a high degree of vector purity. The multi-beams have been used to ablate polished metal samples (Ti-6Al-4V) with laser-induced periodic surface structures (LIPSS), which confirm the polarization states unambiguously. The measured ablation thresholds of the ring mode radial and azimuthal polarizations are close to those of a Gaussian mode when allowance is made for the expected absolute intensity distribution of a ring beam generated from a Gaussian. In addition, ring mode vortex beams with varying orbital angular momentum (OAM) exhibit the same ablation threshold on titanium alloy. Beam scanning with ring modes for surface LIPSS formation can increase micro-structuring throughput by optimizing fluence over a larger effective beam diameter. The comparison of each machined spot was analysed with a machine learning method—cosine similarity—which confirmed the degree of spatial uniformity achieved, reaching cosθ > 0.96 and 0.92 for the 1 × 5 and 2 × 2 arrays, respectively. Scanning electron microscopy (SEM), optical microscopy and white light surface profiling were used to characterize and quantify the effects of surface modification.

2020 ◽  
Vol 463 ◽  
pp. 125341 ◽  
Author(s):  
Mateusz Szatkowski ◽  
Jan Masajada ◽  
Ireneusz Augustyniak ◽  
Klaudia Nowacka

Materials ◽  
2021 ◽  
Vol 14 (9) ◽  
pp. 2243
Author(s):  
Tong Zhou ◽  
Sebastian Kraft ◽  
Walter Perrie ◽  
Jörg Schille ◽  
Udo Löschner ◽  
...  

We report on novel observations of directed re-deposition of ablation debris during the ultrafast laser micro-structuring of stainless steel in the air with multi-beams in close proximity on the surface. This interesting phenomenon is observed with both 10 ps and 600 fs NIR laser pulses at 5 kHz repetition rate. Ablation spot geometries could be altered with the use of beam splitting optics or a phase-only Spatial Light modulator. At low fluence (F ~ 1.0 J cm−2) and pulse exposure of a few hundred pulses, the debris appears as concentrated narrow “filaments” connecting the ablation spots, while at higher fluence, (F ~ 5.0 J cm−2) energetic jets of material emanated symmetrically along the axes of symmetry, depositing debris well beyond the typical re-deposition radius with a single spot. Patterns of backward re-deposition of debris to the surface are likely connected with the colliding shock waves and plasma plumes with the ambient air causing stagnation when the spots are in close proximity. The 2D surface debris patterns are indicative of the complex 3D interactions involved over wide timescales during ablation from picoseconds to microseconds.


2019 ◽  
Vol 58 (2) ◽  
pp. 404 ◽  
Author(s):  
Jasmine M. Andersen ◽  
Samuel N. Alperin ◽  
Andrew A. Voitiv ◽  
William G. Holtzmann ◽  
Juliet T. Gopinath ◽  
...  

Sign in / Sign up

Export Citation Format

Share Document