scholarly journals Study of Partial Oxidation of Methane by Ni/Al2O3 Catalyst: Effect of Support Oxides of Mg, Mo, Ti and Y as Promoters

Molecules ◽  
2020 ◽  
Vol 25 (21) ◽  
pp. 5029
Author(s):  
Ahmed A. Ibrahim ◽  
Wasim U. Khan ◽  
Fahad Al-Mubaddel ◽  
Ahmed S. Al-Fatesh ◽  
Samsudeen O. Kasim ◽  
...  

Catalysts of 10% Ni, supported on promoted alumina, were used to accomplish the partial oxidation of methane. The alumina support was doped with oxides of Mo, Mg, Ti and Y. An incipient wetness impregnation technique was used to synthesize the catalysts. The physicochemical properties of the catalysts were described by XRD, H2-TPR (temperature programmed reduction), BET, TGA, CO2-TPD (temperature-programmed desorption) and Raman. The characterization results denoted that Ni has a strong interaction with the support. The TGA investigation of spent catalysts displayed the anticoking enhancement of the promoters. The impact of the support promoters on the catalyst stability, methane conversion and H2 yield was inspected. Stability tests were done for 460 min. The H2 yields were 76 and 60% and the CH4 conversions were 67 and 92%, respectively, over Ni/Al2O3+Mg, when the reaction temperatures were 550 and 650 °C, respectively. The performance of the present work was compared to relevant findings in the literature.

2017 ◽  
Vol 23 (2) ◽  
pp. 259-267
Author(s):  
Davarani Hosseini ◽  
Hassan Hashemipour ◽  
Alireza Talebizadeh

In this research, a novel modified wet impregnation method has been successfully developed to synthesize 5% Ni/SiO2 nanocatalyst with high catalytic activity and stability for the partial oxidation of methane. Oleylamine was used as a capping agent in the impregnation solution to improve Ni dispersion and interaction with silica surfaces. The product was analyzed and characterized by X-ray diffraction (XRD), Fourier transform infrared (FT-IR) spectroscopy, N2 physisorption measurement and transmission electron microscopy (TEM) and temperature- -programmed H2 reduction (H2-TPR). Partial oxidation of methane over the modified catalyst was performed in a continues-flow fixed-bed reactor under atmospheric pressure at 700?C. The modified catalyst showed 91% CH4 conversion, 86% H2 yield and 95% CO selectivity, and these results almost remained constant within 5 h reaction on stream. The excellent catalytic performance of the catalyst was reasonably attributed to the small and uniform distribution of Ni nanoparticles on the support, and structural characterization confirmed this conclusion.


2009 ◽  
Vol 38 (7) ◽  
pp. 720-721 ◽  
Author(s):  
Tetsuya Shishido ◽  
Reina Morishima ◽  
Yusuke Yoshinaga ◽  
Sadao Hasegawa ◽  
Tsunehiro Tanaka

Catalysts ◽  
2021 ◽  
Vol 11 (6) ◽  
pp. 731
Author(s):  
Andrew C. Chien ◽  
Nicole J. Ye ◽  
Chao-Wei Huang ◽  
I-Hsiang Tseng

We investigated the performance of nickel/samarium-doped ceria (Ni/SDC) nanocatalysts on the catalytic partial oxidation of methane (CPOM). Studies of temperature-programmed surface reaction and reduction reveal that catalytic activity is determined by a synergistic effect produced by Ni metals and metal-support interaction. Catalytic activity was more dependent on the Ni content below 600 °C, while there is not much difference for all catalysts at high temperatures. The catalyst exhibiting high activities toward syngas production (i.e., a CH4 conversion >90% at 700 °C) requires a medium Ni-SDC interaction with an Sm/Ce ratio of about 1/9 to 2/8. This is accounted for by optimum oxygen vacancies and adequate ion diffusivity in the SDCs which, as reported, also display the highest ion conductivity for fuel cell applications.


Sign in / Sign up

Export Citation Format

Share Document