scholarly journals Optimization of Very Low-Dose Formulation of Vitamin D3 with Lyophilizate for Dry Powder Inhalation System by Simple Method Based on Time-of-Flight Theory

Pharmaceutics ◽  
2021 ◽  
Vol 13 (5) ◽  
pp. 632
Author(s):  
Kahori Miyamoto ◽  
Misato Yanagisawa ◽  
Hiroaki Taga ◽  
Hiromichi Yamaji ◽  
Tomomi Akita ◽  
...  

It has been previously reported that active vitamin D3 (VD3) is a candidate drug that can repair alveolar damage in chronic obstructive pulmonary disease at a very low dose. We herein report the optimization of a very low-dose formulation of VD3 for dry powder inhalation by a simple method based on time-of-flight (TOF) theory. As the preparation content of VD3 is very low, aerodynamic particle size distribution cannot be measured by pharmacopeial methods that require quantification of the main drug. Thus, a simple method based on TOF theory, which can measure aerodynamic particle size distribution without quantification, was used. The optimized formulation for an inhalation system using a lyophilized cake contained phenylalanine as the excipient (VD3 1 μg/vial + phenylalanine 0.3 mg/vial) and showed high performance with fine particle fraction ≤ 3 μm = 47.2 ± 4.4%. The difference between the results of pharmacopeial methods and simple method was examined using the formulation containing 10 µg/vial of VD3 and was within 5.0%. The preparation is expected to efficiently deliver VD3 to the lungs. Our simple method can optimize dry powder inhalation formulations more easily and rapidly even when the content of the main drug in a preparation is very low.

Pharmaceutics ◽  
2020 ◽  
Vol 12 (10) ◽  
pp. 976
Author(s):  
Kahori Miyamoto ◽  
Hiroaki Taga ◽  
Tomomi Akita ◽  
Chikamasa Yamashita

Recently, statistical techniques such as design of experiments are being applied for efficient optimization of oral formulations. To use these statistical techniques for inhalation formulations, efficient methods for rapid determination of the aerodynamic particle size distribution of many samples are needed. Therefore, we aimed to develop a simple method to measure aerodynamic particle size distribution that closely agrees with the results of inhalation characteristic tests. We added attachments for dispersion to the aerodynamic particle sizer (APS) so that formulations could be dispersed under the same condition as for multi-stage liquid impinger (MSLI) measurement. Then, we examined the correlation between MSLI and APS using lyophilizate for dry powder inhalation formulations that generate porous particles just on inhalation. It is difficult to obtain the accurate aerodynamic particle size distribution of porous particles by APS because the particle density is difficult to estimate accurately. However, there was a significant correlation between MSLI and APS when the particle density settings for APS measurement was calculated by a conversion factor based on the result of MSLI. The APS with dispersion attachments and this conversion factor can measure a number of samples in a short time, thereby enabling more efficient optimization of dry powder inhalers.


2004 ◽  
Vol 449-452 ◽  
pp. 1237-1240 ◽  
Author(s):  
Hwan Pil Park ◽  
Yoon Chung ◽  
Chong Seung Yoon ◽  
Sung Su Jo ◽  
Young Ho Kim

We developed a simple method of producing metal oxide nanoparticles by reacting a polyamic acid (PAA) with Cu or Sn metal films. Respective particle size, distribution, and morphology were characterized by transmission electron microscopy (TEM). The morphology of metal oxides dispersed in the polyimide is different in Cu and Sn metal films. The Cu2O particles were formed by the dissolution reaction between the polyamic acid and the Cu films. During curing, PAA dehydrates and converts to polyimide, accompanied by precipitation of Cu2O particles. The synthesized Cu2O particles were randomly dispersed within the polyimide. And their particle size was relatively uniform, having a narrow distribution. Mostly nanosize Cu2O particles were formed in the specimen made from 10 nm thick Cu film and the mixture of nanosize particles and Cu layers were observed in the 30 nm thick Cu film. On the other hands, the Sn film undergoes surface reaction with the polyamic acid. Therefore, the synthesized SnO2 particles existed only at the surface of the substrate. SnO2 particle size distribution was not uniform in the polyimide. Although particles were not distributed uniformly in the polyimide, they were confined in a monolayer. The different particle distributions were attributed to the reactivity difference of PAA with Cu and Sn films.


Sign in / Sign up

Export Citation Format

Share Document