scholarly journals RFim: A Real-Time Inundation Extent Model for Large Floodplains Based on Remote Sensing Big Data and Water Level Observations

2019 ◽  
Vol 11 (13) ◽  
pp. 1585 ◽  
Author(s):  
Zeqiang Chen ◽  
Jin Luo ◽  
Nengcheng Chen ◽  
Ren Xu ◽  
Gaoyun Shen
Keyword(s):  
Remote Sensing ◽  
High Resolution ◽  
Water Level ◽  
Real Time ◽  
Remote Sensing Images ◽  
The Real ◽  
Remote Sensing Imagery ◽  
Inundation Simulation ◽  
Inundation Extent

The real-time flood inundation extent plays an important role in flood disaster preparation and reduction. To date, many approaches have been developed for determining the flood extent, such as hydrodynamic models, digital elevation model-based (DEM-based) methods, and remote sensing methods. However, hydrodynamic methods are time consuming when applied to large floodplains, high-resolution DEMs are not always available, and remote sensing imagery cannot be used alone to predict inundation. In this article, a new model for the highly accurate and rapid simulation of floodplains, called “RFim” (real-time inundation model), is proposed to simulate the real-time flooded area. The model combines remote sensing images with in situ data to find the relationship between the inundation extent and water level. The new approach takes advantage of remote sensing images, which have wide spatial coverage and high resolution, and in situ observations, which have continuous temporal coverage and are easily accessible. This approach has been applied in the study area of East Dongting Lake, representing a large floodplain, for inundation simulation at a 30 m resolution. Compared with the submerged extent from observations, the accuracy of the simulation could be more than 90% (the lowest is 93%, and the highest is 96%). Hence, the approach proposed in this study is reliable for predicting the flood extent. Moreover, an inundation simulation for all of 2013 was performed with daily water level observation data. With an increasing number of Earth observation satellites operating in space and high-resolution mappers deployed on satellites, it will be much easier to acquire large quantities of images with very high resolutions. Therefore, the use of RFim to perform inundation simulations with high accuracy and high spatial resolutions in the future is promising because the simulation model is built on remote sensing imagery and gauging station data.

scholarly journals HQ-ISNet: High-Quality Instance Segmentation for Remote Sensing Imagery

2020 ◽  
Vol 12 (6) ◽  
pp. 989 ◽  
Author(s):  
Hao Su ◽  
Shunjun Wei ◽  
Shan Liu ◽  
Jiadian Liang ◽  
Chen Wang ◽  
...  
Keyword(s):  
Remote Sensing ◽  
High Resolution ◽  
Object Detection ◽  
Prediction Accuracy ◽  
Semantic Segmentation ◽  
Remote Sensing Images ◽  
Feature Maps ◽  
High Quality ◽  
Remote Sensing Imagery ◽  
Instance Segmentation

Instance segmentation in high-resolution (HR) remote sensing imagery is one of the most challenging tasks and is more difficult than object detection and semantic segmentation tasks. It aims to predict class labels and pixel-wise instance masks to locate instances in an image. However, there are rare methods currently suitable for instance segmentation in the HR remote sensing images. Meanwhile, it is more difficult to implement instance segmentation due to the complex background of remote sensing images. In this article, a novel instance segmentation approach of HR remote sensing imagery based on Cascade Mask R-CNN is proposed, which is called a high-quality instance segmentation network (HQ-ISNet). In this scheme, the HQ-ISNet exploits a HR feature pyramid network (HRFPN) to fully utilize multi-level feature maps and maintain HR feature maps for remote sensing images’ instance segmentation. Next, to refine mask information flow between mask branches, the instance segmentation network version 2 (ISNetV2) is proposed to promote further improvements in mask prediction accuracy. Then, we construct a new, more challenging dataset based on the synthetic aperture radar (SAR) ship detection dataset (SSDD) and the Northwestern Polytechnical University very-high-resolution 10-class geospatial object detection dataset (NWPU VHR-10) for remote sensing images instance segmentation which can be used as a benchmark for evaluating instance segmentation algorithms in the high-resolution remote sensing images. Finally, extensive experimental analyses and comparisons on the SSDD and the NWPU VHR-10 dataset show that (1) the HRFPN makes the predicted instance masks more accurate, which can effectively enhance the instance segmentation performance of the high-resolution remote sensing imagery; (2) the ISNetV2 is effective and promotes further improvements in mask prediction accuracy; (3) our proposed framework HQ-ISNet is effective and more accurate for instance segmentation in the remote sensing imagery than the existing algorithms.

scholarly journals High-Resolution Intertidal Topography from Sentinel-2 Multi-Spectral Imagery: Synergy between Remote Sensing and Numerical Modeling

2019 ◽  
Vol 11 (24) ◽  
pp. 2888 ◽  
Author(s):  
Md Jamal Uddin Khan ◽  
MD Nazmuddoha Ansary ◽  
Fabien Durand ◽  
Laurent Testut ◽  
Marufa Ishaque ◽  
...  
Keyword(s):  
Remote Sensing ◽  
High Resolution ◽  
Water Level ◽  
Coastal Region ◽  
Test Case ◽  
Bengal Delta ◽  
Error Bar ◽  
Near Shore ◽  
Sentinel 2

The intertidal zones are well recognized for their dynamic nature and role in near-shore hydrodynamics. The intertidal topography is poorly mapped worldwide due to the high cost of associated field campaigns. Here we present a combination of remote-sensing and hydrodynamic modeling to overcome the lack of in situ measurements. We derive a digital elevation model (DEM) by linking the corresponding water level to a sample of shorelines at various stages of the tide. Our shoreline detection method is fully automatic and capable of processing high-resolution imagery from state-of-the-art satellite missions, e.g., Sentinel-2. We demonstrate the use of a tidal model to infer the corresponding water level in each shoreline pixel at the sampled timestamp. As a test case, this methodology is applied to the vast coastal region of the Bengal delta and an intertidal DEM at 10 m resolution covering an area of 1134 km 2 is developed from Sentinel-2 imagery. We assessed the quality of the DEM with two independent in situ datasets and conclude that the accuracy of our DEM amounts to about 1.5 m, which is commensurate with the typical error bar of the validation datasets. This DEM can be useful for high-resolution hydrodynamic and wave modeling of the near-shore area. Additionally, being automatic and numerically effective, our methodology is compliant with near-real-time monitoring constraints.

scholarly journals A Multi-Scale Spatial Attention Region Proposal Network for High-Resolution Optical Remote Sensing Imagery

2021 ◽  
Vol 13 (17) ◽  
pp. 3362
Author(s):  
Ruchan Dong ◽  
Licheng Jiao ◽  
Yan Zhang ◽  
Jin Zhao ◽  
Weiyan Shen
Keyword(s):  
Remote Sensing ◽  
High Resolution ◽  
Object Detection ◽  
Spatial Attention ◽  
Recall Rate ◽  
Optical Remote Sensing ◽  
Remote Sensing Images ◽  
Remote Sensing Imagery ◽  
Multi Scale ◽  
Backbone Network

Deep convolutional neural networks (DCNNs) are driving progress in object detection of high-resolution remote sensing images. Region proposal generation, as one of the key steps in object detection, has also become the focus of research. High-resolution remote sensing images usually contain various sizes of objects and complex background, small objects are easy to miss or be mis-identified in object detection. If the recall rate of region proposal of small objects and multi-scale objects can be improved, it will bring an improvement on the performance of the accuracy in object detection. Spatial attention is the ability to focus on local features in images and can improve the learning efficiency of DCNNs. This study proposes a multi-scale spatial attention region proposal network (MSA-RPN) for high-resolution optical remote sensing imagery. The MSA-RPN is an end-to-end deep learning network with a backbone network of ResNet. It deploys three novel modules to fulfill its task. First, the Scale-specific Feature Gate (SFG) focuses on features of objects by processing multi-scale features extracted from the backbone network. Second, the spatial attention-guided model (SAGM) obtains spatial information of objects from the multi-scale attention maps. Third, the Selective Strong Attention Maps Model (SSAMM) adaptively selects sliding windows according to the loss values from the system’s feedback, and sends the windowed samples to the spatial attention decoder. Finally, the candidate regions and their corresponding confidences can be obtained. We evaluate the proposed network in a public dataset LEVIR and compare with several state-of-the-art methods. The proposed MSA-RPN yields a higher recall rate of region proposal generation, especially for small targets in remote sensing images.

Estimations for Percentage of Impervious Area by the Use of Satellite Remote Sensing Imagery

1994 ◽  
Vol 29 (1-2) ◽  
pp. 135-144 ◽  
Author(s):  
C. Deguchi ◽  
S. Sugio
Keyword(s):  
Remote Sensing ◽  
High Resolution ◽  
Satellite Imagery ◽  
Satellite Remote Sensing ◽  
Aerial Photographs ◽  
Estimation Errors ◽  
Remote Sensing Imagery ◽  
Impervious Area ◽  
Urbanized Areas

This study aims to evaluate the applicability of satellite imagery in estimating the percentage of impervious area in urbanized areas. Two methods of estimation are proposed and applied to a small urbanized watershed in Japan. The area is considered under two different cases of subdivision; i.e., 14 zones and 17 zones. The satellite imageries of LANDSAT-MSS (Multi-Spectral Scanner) in 1984, MOS-MESSR(Multi-spectral Electronic Self-Scanning Radiometer) in 1988 and SPOT-HRV(High Resolution Visible) in 1988 are classified. The percentage of imperviousness in 17 zones is estimated by using these classification results. These values are compared with the ones obtained from the aerial photographs. The percent imperviousness derived from the imagery agrees well with those derived from aerial photographs. The estimation errors evaluated are less than 10%, the same as those obtained from aerial photographs.

Sign in / Sign up

Export Citation Format

Share Document